Opened 4 years ago

Closed 3 years ago

#17348 closed defect (too_vague)

WR841ND V8: the WAN port is missing

Reported by: philip_petev Owned by: developers
Priority: high Milestone:
Component: base system Version: Trunk
Keywords: Cc:


The WAN port is missing in all trunk version I've tested so far. It was working in Attitude Adjustment. Also, the port numbering is complete mess:
Port 1 on the switch -> Port 2 in OpenWRT
Port 2 on the switch -> Port 3 in OpenWRT
Port 4 on the switch -> Port 5 in OpenWRT
Port 4 on the switch -> Port 1 in OpenWRT
Port 0 (WAN) -> missing in OpenWRT

Attachments (0)

Change History (4)

comment:1 Changed 4 years ago by philip_petev

Forgot to mention, by "trunk versions" I mean the Barrier Breaker branch. Currently have installed r41842, built by source. Yesterday tested BB rc2 and it has the same problem.

comment:2 Changed 3 years ago by anonymous


comment:3 Changed 3 years ago by anonymous

The WAN port is missing where? On Luci it does not appear under Network>Switch but does under Network>Interfaces and also under Status page. I am using TLWR841N v8.4 RC2.

I tried a clean factory flash of RC2 and didn't notice any problems but did not use it much. Now using an RC2 ImageBuilder compilation having gotten rid of all IPv6 junk and also Bootstrap theme and gone back to standard. Ports are numbered on Network>Vlan/Switch OK.

comment:4 Changed 3 years ago by jow

  • Resolution set to too_vague
  • Status changed from new to closed

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.