Modify

Opened 4 years ago

Closed 3 years ago

#16752 closed defect (worksforme)

WDR4900 with non-atheros 2.4GHz Wi-Fi adapter

Reported by: fcecamor Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: Cc:

Description

Hi,
I flashed today the latest trunk r41062 on my new WDR4900 v. 1.3.

The first Wi-Fi adapter seem to not be the normal atheros of this router but a RaLink Rt3352

After the configuration the 2.4GHz reduce speed and kick out all clients with this errors:

[ 1482.998873] ath: phy1: Failed to stop TX DMA, queues=0x004!
[ 1484.045135] ath: phy1: Failed to stop TX DMA, queues=0x004!
[ 1484.990776] ath: phy1: Failed to stop TX DMA, queues=0x004!
[ 1506.321220] ath: phy1: Failed to stop TX DMA, queues=0x004!

Is the firmware trying to use the wrong driver ?

This is my dmesg:

[    0.000000] Using Freescale P1014 machine description
[    0.000000] Memory CAM mapping: 64/64 Mb, residual: 0Mb
[    0.000000] Linux version 3.10.36 (openwrt@gb-13) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r41062) ) #1 Tue Jun 10 02:50:49 UTC 2014
[    0.000000] Found legacy serial port 0 for /soc@ffe00000/serial@4500
[    0.000000]   mem=ffe04500, taddr=ffe04500, irq=0, clk=399999996, speed=0
[    0.000000] TL-WDR4900 v1 board from TP-Link
[    0.000000] Top of RAM: 0x8000000, Total RAM: 0x8000000
[    0.000000] Memory hole size: 0MB
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00000000-0x07ffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000] free_area_init_node: node 0, pgdat c03234a8, node_mem_map c035c000
[    0.000000]   DMA zone: 256 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 32768 pages, LIFO batch:7
[    0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 60572k/131072k available (3132k kernel code, 70500k reserved, 116k data, 184k bss, 132k init)
[    0.000000] Kernel virtual memory layout:
[    0.000000]   * 0xfffdf000..0xfffff000  : fixmap
[    0.000000]   * 0xfe000000..0xfe000000  : early ioremap
[    0.000000]   * 0xc9000000..0xfe000000  : vmalloc & ioremap
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:512 nr_irqs:512 16
[    0.000000] mpic: Resetting
[    0.000000] mpic: Setting up MPIC " OpenPIC  " version 1.2 at ffe40000, max 1 CPUs
[    0.000000] mpic: ISU size: 256, shift: 8, mask: ff
[    0.000000] mpic: Initializing for 256 sources
[    0.000000] time_init: decrementer frequency = 49.999999 MHz
[    0.000000] time_init: processor frequency   = 799.999992 MHz
[    0.000000] clocksource: timebase mult[14000007] shift[24] registered
[    0.000000] clockevent: decrementer mult[cccccc9] shift[32] cpu[0]
[    0.000047] pid_max: default: 32768 minimum: 301
[    0.000143] Mount-cache hash table entries: 512
[    0.002630] NET: Registered protocol family 16
[    0.008193] Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->255
[    0.008204] PCI host bridge /pcie@ffe09000 (primary) ranges:
[    0.008213]  MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000
[    0.008222]   IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000
[    0.008237] /pcie@ffe09000: PCICSRBAR @ 0xfff00000
[    0.008582] Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->255
[    0.008591] PCI host bridge /pcie@ffe0a000  ranges:
[    0.008600]  MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000
[    0.008608]   IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000
[    0.008622] /pcie@ffe0a000: PCICSRBAR @ 0xfff00000
[    0.020348] PCI: Probing PCI hardware
[    0.020628] fsl-pci ffe09000.pcie: PCI host bridge to bus 0000:00
[    0.020643] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.020653] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xbfffffff]
[    0.020674] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.020686] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.020719] pci 0000:00:00.0: [1957:012b] type 01 class 0x0b2000
[    0.020733] pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
[    0.020766] pci 0000:00:00.0: supports D1 D2
[    0.020775] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.021158] pci 0000:01:00.0: [168c:0033] type 00 class 0x028000
[    0.021189] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xa001ffff 64bit]
[    0.021229] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.021269] pci 0000:01:00.0: supports D1
[    0.021277] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[    0.028129] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.028146] pci 0000:00:00.0:   bridge window [mem 0xa0000000-0xa00fffff]
[    0.028204] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.028218] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.028387] fsl-pci ffe0a000.pcie: PCI host bridge to bus 0001:02
[    0.028403] pci_bus 0001:02: root bus resource [io  0x20000-0x2ffff] (bus address [0x0000-0xffff])
[    0.028413] pci_bus 0001:02: root bus resource [mem 0x80000000-0x9fffffff]
[    0.028424] pci_bus 0001:02: root bus resource [bus 02-ff]
[    0.028435] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to ff
[    0.028467] pci 0001:02:00.0: [1957:012b] type 01 class 0x0b2000
[    0.028478] pci 0001:02:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
[    0.028505] pci 0001:02:00.0: supports D1 D2
[    0.028514] pci 0001:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.028706] pci 0001:02:00.0: Primary bus is hard wired to 0
[    0.028719] pci 0001:02:00.0: bridge configuration invalid ([bus 01-01]), reconfiguring
[    0.028890] pci 0001:03:00.0: [168c:abcd] type 00 class 0x020000
[    0.028900] pci 0001:03:00.0: AR9381 fixup applied
[    0.028924] pci 0001:03:00.0: reg 10: [mem 0x80000000-0x8001ffff 64bit]
[    0.028964] pci 0001:03:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    0.029003] pci 0001:03:00.0: supports D1
[    0.029012] pci 0001:03:00.0: PME# supported from D0 D1 D3hot
[    0.036141] pci 0001:02:00.0: PCI bridge to [bus 03-ff]
[    0.036157] pci 0001:02:00.0:   bridge window [mem 0x80000000-0x800fffff]
[    0.036208] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
[    0.036222] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 03
[    0.036265] PCI 0000:00 Cannot reserve Legacy IO [io  0x0000-0x0fff]
[    0.036273] PCI 0001:02 Cannot reserve Legacy IO [io  0x20000-0x20fff]
[    0.036301] pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x100000)
[    0.036315] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0020000-0xa002ffff pref]
[    0.036325] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.036335] pci 0000:00:00.0:   bridge window [io  0x0000-0xffff]
[    0.036345] pci 0000:00:00.0:   bridge window [mem 0xa0000000-0xbfffffff]
[    0.036357] pci 0001:02:00.0: BAR 9: can't assign mem pref (size 0x100000)
[    0.036369] pci 0001:03:00.0: BAR 6: assigned [mem 0x80020000-0x8002ffff pref]
[    0.036378] pci 0001:02:00.0: PCI bridge to [bus 03]
[    0.036388] pci 0001:02:00.0:   bridge window [io  0x20000-0x2ffff]
[    0.036397] pci 0001:02:00.0:   bridge window [mem 0x80000000-0x9fffffff]
[    0.036403] Some PCI device resources are unassigned, try booting with pci=realloc
[    0.036423] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.036433] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xbfffffff]
[    0.036443] pci_bus 0000:01: resource 0 [io  0x0000-0xffff]
[    0.036452] pci_bus 0000:01: resource 1 [mem 0xa0000000-0xbfffffff]
[    0.036462] pci_bus 0001:02: resource 4 [io  0x20000-0x2ffff]
[    0.036471] pci_bus 0001:02: resource 5 [mem 0x80000000-0x9fffffff]
[    0.036481] pci_bus 0001:03: resource 0 [io  0x20000-0x2ffff]
[    0.036491] pci_bus 0001:03: resource 1 [mem 0x80000000-0x9fffffff]
[    0.036498] Registering qe_ic with sysfs...
[    0.039230] bio: create slab <bio-0> at 0
[    0.040471] Switching to clocksource timebase
[    0.041834] NET: Registered protocol family 2
[    0.042154] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.042183] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042199] TCP: Hash tables configured (established 1024 bind 1024)
[    0.042249] TCP: reno registered
[    0.042259] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.042276] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.042417] NET: Registered protocol family 1
[    0.042463] PCI: CLS 32 bytes, default 32
[    0.050953] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.050966] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.051535] msgmni has been set to 246
[    0.051642] io scheduler noop registered
[    0.051650] io scheduler deadline registered (default)
[    0.102060] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.104636] serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550A
[    0.603986] console [ttyS0] enabled
[    0.608169] ffe04500.serial: ttyS0 at MMIO 0xffe04500 (irq = 42) is a 16550
[    0.615524] Generic RTC Driver v1.07
[    0.620362] fsl_espi ffe07000.spi: master is unqueued, this is deprecated
[    0.627462] m25p80 spi0.0: s25fl129p1 (16384 Kbytes)
[    0.632563] 7 ofpart partitions found on MTD device spi0.0
[    0.638052] Creating 7 MTD partitions on "spi0.0":
[    0.642845] 0x000000000000-0x000000050000 : "u-boot"
[    0.648478] 0x000000050000-0x000000060000 : "dtb"
[    0.653800] 0x000000060000-0x000000300000 : "kernel"
[    0.659379] 0x000000300000-0x000000fe0000 : "rootfs"
[    0.664946] mtd: device 3 (rootfs) set to be root filesystem
[    0.670694] mtd: partition "rootfs_data" created automatically, ofs=0x4d0000, len=0xb10000
[    0.678965] 0x0000004d0000-0x000000fe0000 : "rootfs_data"
[    0.684991] 0x000000fe0000-0x000000ff0000 : "config"
[    0.690552] 0x000000ff0000-0x000001000000 : "caldata"
[    0.696206] 0x000000060000-0x000000fe0000 : "firmware"
[    0.701941] fsl_espi ffe07000.spi: at 0xc901e000 (irq = 59)
[    0.708402] libphy: Freescale PowerQUICC MII Bus: probed
[    0.736661] switch0: Atheros AR8327 rev. 2 switch registered on mdio@ffe24000
[    1.924680] fsl-gianfar ethernet.1 eth0: mac: 00:04:9f:ef:01:01
[    1.930614] fsl-gianfar ethernet.1 eth0: Running with NAPI enabled
[    1.936796] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[0]: 256
[    1.943323] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[1]: 256
[    1.949850] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[2]: 256
[    1.956377] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[3]: 256
[    1.962905] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[4]: 256
[    1.969432] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[5]: 256
[    1.975960] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[6]: 256
[    1.982487] fsl-gianfar ethernet.1 eth0: RX BD ring size for Q[7]: 256
[    1.989014] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[0]: 256
[    1.995541] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[1]: 256
[    2.002071] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[2]: 256
[    2.008597] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[3]: 256
[    2.015124] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[4]: 256
[    2.021652] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[5]: 256
[    2.028179] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[6]: 256
[    2.034706] fsl-gianfar ethernet.1 eth0: TX BD ring size for Q[7]: 256
[    2.041404] ucc_geth_driver: QE UCC Gigabit Ethernet Controller
[    2.047705] TCP: cubic registered
[    2.051037] NET: Registered protocol family 17
[    2.055542] Bridge firewalling registered
[    2.059563] 8021q: 802.1Q VLAN Support v1.8
[    2.068733] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    2.076182] Freeing unused kernel memory: 132K (c02ee000 - c030f000)
[    3.548025] usbcore: registered new interface driver usbfs
[    3.553642] usbcore: registered new interface driver hub
[    3.559091] usbcore: registered new device driver usb
[    3.566350] Button Hotplug driver version 0.4.1
[    3.573218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.579835] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    3.586469] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[    3.603548] fsl-ehci fsl-ehci.0: irq 28, io mem 0xffe22000
[    3.620499] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    3.626512] hub 1-0:1.0: USB hub found
[    3.630289] hub 1-0:1.0: 1 port detected
[    3.634922] ehci-platform: EHCI generic platform driver
[    3.956516] usb 1-1: new high-speed USB device number 2 using fsl-ehci
[    4.094845] hub 1-1:1.0: USB hub found
[    4.099005] hub 1-1:1.0: 4 ports detected
[    5.862898] libphy: mdio@ffe24000:00 - Link is Up - 1000/Full
[    7.094320] jffs2: notice: (869) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 7 of xref (0 dead, 2 orphan) found.
[   10.713117] NET: Registered protocol family 10
[   10.756745] tun: Universal TUN/TAP device driver, 1.6
[   10.761811] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.787768] nf_conntrack version 0.5.0 (1977 buckets, 7908 max)
[   10.808721] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.841271] booke_wdt: powerpc book-e watchdog driver loaded
[   10.855812] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   10.863760] Backport generated by backports.git backports-20140320-37-g5c33da0
[   10.883131] input: buttons.8 as /devices/buttons.8/input/input0
[   10.895621] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.985279] xt_time: kernel timezone is -0000
[   11.018776] cfg80211: Calling CRDA to update world regulatory domain
[   11.036561] cfg80211: World regulatory domain updated:
[   11.041714] cfg80211:  DFS Master region: unset
[   11.046067] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.055810] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.063812] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.071816] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   11.079831] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.087835] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   11.095837] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   11.149704] PPP generic driver version 2.4.2
[   11.164639] NET: Registered protocol family 24
[   11.223726] ath: EEPROM regdomain: 0x0
[   11.223739] ath: EEPROM indicates default country code should be used
[   11.223743] ath: doing EEPROM country->regdmn map search
[   11.223754] ath: country maps to regdmn code: 0x3a
[   11.223760] ath: Country alpha2 being used: US
[   11.223765] ath: Regpair used: 0x3a
[   11.232388] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.242469] cfg80211: Calling CRDA for country: US
[   11.250041] cfg80211: Regulatory domain changed to country: US
[   11.255905] cfg80211:  DFS Master region: FCC
[   11.260086] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.269828] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   11.277831] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   11.285847] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   11.293851] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   11.301853] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   11.316254] ieee80211 phy0: Atheros AR9300 Rev:4 mem=0xc9740000, irq=17
[   11.330988] ath: EEPROM regdomain: 0x0
[   11.331000] ath: EEPROM indicates default country code should be used
[   11.331005] ath: doing EEPROM country->regdmn map search
[   11.331016] ath: country maps to regdmn code: 0x3a
[   11.331022] ath: Country alpha2 being used: US
[   11.331027] ath: Regpair used: 0x3a
[   11.344439] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   11.362238] ieee80211 phy1: Atheros AR9300 Rev:3 mem=0xc97c0000, irq=18
[   14.684102] device eth0.1 entered promiscuous mode
[   14.688981] device eth0 entered promiscuous mode
[   14.698530] br-lan: port 1(eth0.1) entered forwarding state
[   14.704145] br-lan: port 1(eth0.1) entered forwarding state
[   15.309518] cfg80211: Calling CRDA for country: IT
[   15.324223] cfg80211: Regulatory domain changed to country: IT
[   15.330105] cfg80211:  DFS Master region: ETSI
[   15.334371] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.344117] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.352120] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.360124] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[   15.368127] cfg80211:   (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
[   15.376131] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   16.679183] libphy: mdio@ffe24000:00 - Link is Up - 1000/Full
[   16.704974] br-lan: port 1(eth0.1) entered forwarding state
[   17.509757] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   17.536839] device wlan1 entered promiscuous mode
[   17.655448] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.699902] device wlan0 entered promiscuous mode
[   17.704722] br-lan: port 3(wlan0) entered forwarding state
[   17.710268] br-lan: port 3(wlan0) entered forwarding state
[   18.103684] br-lan: port 2(wlan1) entered forwarding state
[   18.109225] br-lan: port 2(wlan1) entered forwarding state
[   18.114771] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   18.378063] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   19.712499] br-lan: port 3(wlan0) entered forwarding state
[   20.112498] br-lan: port 2(wlan1) entered forwarding state
[   72.272364] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.313114] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.352838] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.392459] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.432937] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.472624] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.519279] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.558957] ath: phy1: Failed to stop TX DMA, queues=0x004!
[   72.598995] ath: phy1: Failed to stop TX DMA, queues=0x004!
[and more and more atheros errors]

Others info:

root@Router:~# iw wlan0 info
Interface wlan0
        ifindex 9
        wdev 0x2
        addr 
        ssid CC.net-5.2
        type AP
        wiphy 0
        channel 36 (5180 MHz), width: 40 MHz, center1: 5190 MHz
root@Router:~# iw wlan1 info
Interface wlan1
        ifindex 10
        wdev 0x100000002
        addr 
        ssid CC.net-2.4
        type AP
        wiphy 1
        channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
root@Router:~# iwinfo
wlan0     ESSID: "CC.net-5.2"
          Access Point: 
          Mode: Master  Channel: 36 (5.180 GHz)
          Tx-Power: 17 dBm  Link Quality: 46/70
          Signal: -64 dBm  Noise: -93 dBm
          Bit Rate: 72.2 MBit/s
          Encryption: WPA2 PSK (CCMP)
          Type: nl80211  HW Mode(s): 802.11an
          Hardware: 168C:0033 168C:A120 [Atheros AR9580]
          TX power offset: none
          Frequency offset: none
          Supports VAPs: yes  PHY name: phy0

wlan1     ESSID: "CC.net-2.4"
          Access Point: 
          Mode: Master  Channel: 11 (2.462 GHz)
          Tx-Power: 20 dBm  Link Quality: 41/70
          Signal: -69 dBm  Noise: -95 dBm
          Bit Rate: 72.2 MBit/s
          Encryption: WPA2 PSK (CCMP)
          Type: nl80211  HW Mode(s): 802.11bgn
          Hardware: 168C:0030 0000:0000 [RaLink Rt3352]
          TX power offset: none
          Frequency offset: none
          Supports VAPs: yes  PHY name: phy1

root@Router:~#

I'm available for any test.
Fabio

Attachments (0)

Change History (3)

comment:1 Changed 4 years ago by fcecamor

Can someone, please, delete my MAC addresses in the upper post ?
Thanks

comment:2 Changed 4 years ago by fcecamor

What LuCi say:
http://s9.postimg.org/wz6f650e7/screenshot_3.png

comment:3 Changed 3 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

should be fixed in current trunk

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.