Modify ↓
#166 closed defect (fixed)
eth1 down after reboot when configured for WPA Radius AP
Reported by: | deshawn ((@… | Owned by: | developers |
---|---|---|---|
Priority: | normal | Milestone: | Barrier Breaker 14.07 |
Component: | base system | Version: | 2.0 |
Keywords: | Cc: |
Description
I'm not sure if this applies to other wireless security settings (or even an open access point configuration), but when I configured the wireless settings for WPA Radius and installed the nas package, the eth1 interface was missing after every reboot. A simple "ifconfig eth1 up" remedied the problem, but not until weeks of tolling over people saying the broadcom drivers don't work with the nas binary using WPA.
I using the standard broadband router configuration (lan=br0(vlan0 eth1) wan=vlan1).
I'm also running whiterussian RC4, though I have experianced the same problem on RC3.
Attachments (0)
Change History (3)
comment:1 Changed 12 years ago by achim71000
comment:2 Changed 11 years ago by nbd
- Resolution set to fixed
- Status changed from new to closed
comment:3 Changed 4 years ago by jow
- Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07
Milestone Attitude Adjustment 12.09 deleted
Note: See
TracTickets for help on using
tickets.
start_nas() {
}