Modify

Opened 4 years ago

Last modified 4 years ago

#15525 new defect

Problem with usb storage

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description

With the newest trunk r40430 is no usb available.
I get the following error Messages (System log):
Cant mount usb-storage divices (tryed usb with ext4 and HDD with ntfs)
lsusb returns "unable to initialize libusb: -99"
And there is no sda or sdf in /dev
Device is DLINK 620 D1
If you need more Information, let me know..
Thanks

Attachments (0)

Change History (3)

comment:1 Changed 4 years ago by anonymous

system log

[ 0.000000] Linux version 3.10.34 (sasha@NetBook) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40449) ) #1 Fri Apr 11 03:35:22 MSK 2014
[ 0.000000] SoC Type: Ralink RT3352 id:1 rev:6
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DIR-620 D1
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 80288990, node_mem_map 81003860
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8192 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=000396e0
[ 0.000000] Readback ErrCtl register=000396e0
[ 0.000000] Memory: 29356k/32768k available (2133k kernel code, 3412k reserved, 543k data, 200k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 400MHz
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.090000] Mount-cache hash table entries: 512
[ 0.100000] pinctrl core: initialized pinctrl subsystem
[ 0.110000] NET: Registered protocol family 16
[ 0.130000] rt2880-pinmux pinctrl.1: try to register 45 pins ...
[ 0.130000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux
[ 0.130000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux
[ 0.130000] pinctrl core: add 5 pinmux maps
[ 0.130000] rt2880-pinmux pinctrl.1: found group selector 0 for i2c
[ 0.130000] rt2880-pinmux pinctrl.1: found group selector 4 for jtag
[ 0.130000] rt2880-pinmux pinctrl.1: found group selector 2 for uartf
[ 0.130000] rt2880-pinmux pinctrl.1: found group selector 6 for rgmii
[ 0.130000] rt2880-pinmux pinctrl.1: found group selector 5 for mdio
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 1 (io1) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 2 (io2) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 27 (io27) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 28 (io28) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 29 (io29) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 30 (io30) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 31 (io31) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 32 (io32) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 33 (io33) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 34 (io34) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 35 (io35) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pinctrl.1
[ 0.130000] rt2880-pinmux pinctrl.1: failed to lookup the sleep state
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.160000] rt2880_gpio 10000600.gpio: registering 24 gpios
[ 0.170000] rt2880_gpio 10000600.gpio: registering 24 irq handlers
[ 0.180000] Switching to clocksource MIPS
[ 0.190000] NET: Registered protocol family 2
[ 0.200000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.220000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.230000] TCP: Hash tables configured (established 512 bind 512)
[ 0.240000] TCP: reno registered
[ 0.250000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.270000] NET: Registered protocol family 1
[ 0.280000] rt-timer 10000100.timer: maximum frequncy is 8138Hz
[ 0.300000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT
[ 0.330000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.340000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.360000] msgmni has been set to 57
[ 0.370000] io scheduler noop registered
[ 0.380000] io scheduler deadline registered (default)
[ 0.390000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.400000] serial8250 serial8250: no of_node; not parsing pinctrl DT
[ 0.400000] pinctrl core: add 1 pinmux maps
[ 0.400000] rt2880-pinmux pinctrl.1: found group selector 3 for uartlite
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 15 (io15) for 10000c00.uartlite
[ 0.400000] rt2880-pinmux pinctrl.1: request pin 16 (io16) for 10000c00.uartlite
[ 0.410000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 0.420000] console [ttyS0] enabled, bootconsole disabled
[ 0.450000] pinctrl core: add 1 pinmux maps
[ 0.450000] rt2880-pinmux pinctrl.1: found group selector 1 for spi
[ 0.450000] rt2880-pinmux pinctrl.1: request pin 3 (io3) for 10000b00.spi
[ 0.450000] rt2880-pinmux pinctrl.1: request pin 4 (io4) for 10000b00.spi
[ 0.450000] rt2880-pinmux pinctrl.1: request pin 5 (io5) for 10000b00.spi
[ 0.450000] rt2880-pinmux pinctrl.1: request pin 6 (io6) for 10000b00.spi
[ 0.450000] m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
[ 0.460000] 4 ofpart partitions found on MTD device spi32766.0
[ 0.470000] Creating 4 MTD partitions on "spi32766.0":
[ 0.480000] 0x000000000000-0x000000030000 : "u-boot"
[ 0.500000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 0.510000] 0x000000040000-0x000000050000 : "factory"
[ 0.520000] 0x000000050000-0x000000800000 : "firmware"
[ 0.540000] 0x00000013fb77-0x000000800000 : "rootfs"
[ 0.550000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[ 0.580000] mtd: device 4 (rootfs) set to be root filesystem
[ 0.590000] mtd: partition "rootfs_data" created automatically, ofs=0x3b0000, len=0x450000
[ 0.600000] 0x0000003b0000-0x000000800000 : "rootfs_data"
[ 0.630000] eth0: done loading
[ 0.640000] rt2880_wdt 10000120.watchdog: Initialized
[ 0.650000] TCP: cubic registered
[ 0.650000] NET: Registered protocol family 17
[ 0.660000] 8021q: 802.1Q VLAN Support v1.8
[ 0.690000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 0.700000] Freeing unused kernel memory: 200K (8029e000 - 802d0000)
[ 2.400000] rt305x-esw 10110000.esw: link changed 0x08
[ 5.740000] rt305x-esw 10110000.esw: link changed 0x00
[ 6.990000] usbcore: registered new interface driver usbfs
[ 7.000000] usbcore: registered new interface driver hub
[ 7.010000] usbcore: registered new device driver usb
[ 7.070000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pio:7
[ 7.090000] SCSI subsystem initialized
[ 7.110000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.130000] ehci-platform: EHCI generic platform driver
[ 7.140000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.170000] dwc_otg: version 2.72a 24-JUN-2008
[ 7.180000] leds-gpio gpio-leds.3: pins are not configured from the driver
[ 7.190000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pio:9
[ 7.190000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pio:17
[ 7.200000] usbcore: registered new interface driver usb-storage

[ 7.370000] rt305x-esw 10110000.esw: link changed 0x08
[ 10.130000] jffs2: notice: (305) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 0 orphan) found.
[ 10.330000] jffs2: notice: (302) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 11 of xref (0 dead, 0 orphan) found.
[ 13.760000] NET: Registered protocol family 10
[ 13.800000] zram: Created 1 device(s) ...
[ 13.840000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 13.950000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)
[ 13.970000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.010000] Loading modules backported from Linux version master-2014-03-31-1-0-g5c109d2
[ 14.030000] Backport generated by backports.git backports-20140221-0-g8e94650
[ 14.050000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.120000] xt_time: kernel timezone is -0000
[ 14.180000] cfg80211: Calling CRDA to update world regulatory domain
[ 14.190000] cfg80211: World regulatory domain updated:
[ 14.200000] cfg80211: DFS Master region: unset
[ 14.210000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.230000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.250000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.260000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.280000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.290000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 14.310000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.390000] PPP generic driver version 2.4.2
[ 14.410000] NET: Registered protocol family 24
[ 14.480000] rt2800_wmac 10180000.wmac: failed to load eeprom property
[ 14.500000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
[ 14.520000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3352, rev 0200 detected
[ 14.540000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 000c detected
[ 14.550000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.140000] Adding 14332k swap on /dev/zram0. Priority:-1 extents:1 across:14332k SS
[ 19.220000] rt305x-esw 10110000.esw: link changed 0x00
[ 20.980000] rt305x-esw 10110000.esw: link changed 0x08
[ 25.650000] device eth0.1 entered promiscuous mode
[ 25.660000] device eth0 entered promiscuous mode
[ 25.680000] br-lan: port 1(eth0.1) entered forwarding state
[ 25.690000] br-lan: port 1(eth0.1) entered forwarding state
[ 26.670000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 27.690000] br-lan: port 1(eth0.1) entered forwarding state
[ 32.550000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.570000] device wlan0 entered promiscuous mode
[ 32.890000] br-lan: port 2(wlan0) entered forwarding state
[ 32.900000] br-lan: port 2(wlan0) entered forwarding state
[ 32.910000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 34.900000] br-lan: port 2(wlan0) entered forwarding state

comment:2 Changed 4 years ago by anonymous

opkg list-installed

base-files - 151-r40449
block-mount - 2014-04-07-a1f48fc0444f5c3c44ee6ef1005cd8da65decefd
busybox - 1.19.4-7
dnsmasq - 2.66-5
dropbear - 2014.63-1
fdisk - 2.24.1-1
firewall - 2014-03-20
fstools - 2014-04-07-a1f48fc0444f5c3c44ee6ef1005cd8da65decefd
hostapd-common - 2014-04-04-1
ip6tables - 1.4.21-1
iptables - 1.4.21-1
iw - 3.14-1
iwinfo - 47
jshn - 2014-03-18-4f44401ae8d23465261cef80b87630ffccd5a864
kernel - 3.10.34-1-34b93676571ff83e0decb09244b423da
kmod-cfg80211 - 3.10.34+2014-03-31-1
kmod-crypto-aes - 3.10.34-1
kmod-crypto-arc4 - 3.10.34-1
kmod-crypto-core - 3.10.34-1
kmod-crypto-hash - 3.10.34-1
kmod-eeprom-93cx6 - 3.10.34-1
kmod-fs-ext4 - 3.10.34-1
kmod-fs-ntfs - 3.10.34-1
kmod-fs-vfat - 3.10.34-1
kmod-gpio-button-hotplug - 3.10.34-1
kmod-ip6tables - 3.10.34-1
kmod-ipt-conntrack - 3.10.34-1
kmod-ipt-core - 3.10.34-1
kmod-ipt-nat - 3.10.34-1
kmod-ipt-nathelper - 3.10.34-1
kmod-ipv6 - 3.10.34-1
kmod-leds-gpio - 3.10.34-1
kmod-ledtrig-usbdev - 3.10.34-1
kmod-lib-crc-ccitt - 3.10.34-1
kmod-lib-crc-itu-t - 3.10.34-1
kmod-lib-crc16 - 3.10.34-1
kmod-lib-lzo - 3.10.34-1
kmod-mac80211 - 3.10.34+2014-03-31-1
kmod-nls-base - 3.10.34-1
kmod-ppp - 3.10.34-1
kmod-pppoe - 3.10.34-1
kmod-pppox - 3.10.34-1
kmod-rt2800-lib - 3.10.34+2014-03-31-1
kmod-rt2800-mmio - 3.10.34+2014-03-31-1
kmod-rt2800-soc - 3.10.34+2014-03-31-1
kmod-rt2x00-lib - 3.10.34+2014-03-31-1
kmod-rt2x00-mmio - 3.10.34+2014-03-31-1
kmod-scsi-core - 3.10.34-1
kmod-slhc - 3.10.34-1
kmod-usb-core - 3.10.34-1
kmod-usb-ohci - 3.10.34-1
kmod-usb-rt305x-dwc_otg - 3.10.34-1
kmod-usb-storage - 3.10.34-1
kmod-usb2 - 3.10.34-1

kmod-zram - 3.10.34-1
libblkid - 2.24.1-1
libblobmsg-json - 2014-03-18-4f44401ae8d23465261cef80b87630ffccd5a864
libc - 0.9.33.2-1
libgcc - 4.8-linaro-1
libip4tc - 1.4.21-1
libip6tc - 1.4.21-1
libiwinfo - 47
libiwinfo-lua - 47
libjson-c - 0.11-2
libjson-script - 2014-03-18-4f44401ae8d23465261cef80b87630ffccd5a864
liblua - 5.1.5-1
libnl-tiny - 0.1-3
libpthread - 0.9.33.2-1
librt - 0.9.33.2-1
libubox - 2014-03-18-4f44401ae8d23465261cef80b87630ffccd5a864
libubus - 2014-03-18-1d5ac421a5b3dca60562e876ba70d0c2fe46b3d2
libubus-lua - 2014-03-18-1d5ac421a5b3dca60562e876ba70d0c2fe46b3d2
libuci - 2014-02-18.1-1
libuci-lua - 2014-02-18.1-1
libusb-1.0 - 1.0.9-1
libuuid - 2.24.1-1
libxtables - 1.4.21-1
lua - 5.1.5-1
luci - svn-r9964-1
luci-app-firewall - svn-r9964-1
luci-i18n-english - svn-r9964-1
luci-i18n-russian - svn-r9964-1
luci-lib-core - svn-r9964-1
luci-lib-ipkg - svn-r9964-1
luci-lib-nixio - svn-r9964-1
luci-lib-sys - svn-r9964-1
luci-lib-web - svn-r9964-1
luci-mod-admin-core - svn-r9964-1
luci-mod-admin-full - svn-r9964-1
luci-proto-core - svn-r9964-1
luci-proto-ppp - svn-r9964-1
luci-sgi-cgi - svn-r9964-1
luci-theme-base - svn-r9964-1
luci-theme-bootstrap - svn-r9964-1
mtd - 20
netifd - 2014-04-10-e47461aedf90785f179331ac9a58127aadb3b650
odhcp6c - 2014-04-09-6bbd2b0208fc17b6566595bfdfef2ff1d012d143
odhcpd - 2014-04-09-0c6ad596952d78267369561b57723b93d835b953
opkg - 9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6
pciutils - 3.2.0-1
ppp - 2.4.5-10
ppp-mod-pppoe - 2.4.5-10
procd - 2014-03-18-7a9cbcd88b6cf3c0cbee6d4f76c2adaedc54058d
swconfig - 10
ubox - 2014-03-27-1d9d2e6ae99c9ba72d1bc40e554d5f422c9b9196
ubus - 2014-03-18-1d5ac421a5b3dca60562e876ba70d0c2fe46b3d2
ubusd - 2014-03-18-1d5ac421a5b3dca60562e876ba70d0c2fe46b3d2
uci - 2014-02-18.1-1
uhttpd - 2014-03-22-31b459cb1d0ba3280cbc3fc06ce6fab903c07da6
uhttpd-mod-ubus - 2014-03-22-31b459cb1d0ba3280cbc3fc06ce6fab903c07da6
usbutils - 007-1
wpad-mini - 2014-04-04-1
zlib - 1.2.8-1
zram-swap - 1-2

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.