Modify

Opened 4 years ago

Last modified 3 years ago

#15183 new defect

TP-LINK TL-WDR4300 Failed to connect to ubus?

Reported by: CanadianJeff Owned by: developers
Priority: high Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: Cc:

Description

Sat Mar  8 04:16:29 2014 kern.notice kernel: [    0.570000] 1 squashfs-split partitions found on MTD device rootfs
Sat Mar  8 04:16:29 2014 kern.notice kernel: [    0.570000] 0x0000002f0000-0x0000007f0000 : "rootfs_data"
Sat Mar  8 04:16:29 2014 kern.notice kernel: [    0.580000] 0x0000007f0000-0x000000800000 : "art"
Sat Mar  8 04:16:29 2014 kern.notice kernel: [    0.580000] 0x000000020000-0x0000007f0000 : "firmware"
Sat Mar  8 04:16:29 2014 kern.info kernel: [    0.620000] switch0: Atheros AR8327 rev. 2 switch registered on ag71xx-mdio.0
Sat Mar  8 04:16:29 2014 kern.info kernel: [    1.830000] libphy: ag71xx_mdio: probed
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.390000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd033, driver=Atheros AR8216/AR8236/AR8316]
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.400000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.410000] TCP: cubic registered
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.410000] NET: Registered protocol family 17
Sat Mar  8 04:16:29 2014 kern.notice kernel: [    2.410000] Bridge firewalling registered
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.420000] can: controller area network core (rev 20120528 abi 9)
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.420000] NET: Registered protocol family 29
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.430000] 8021q: 802.1Q VLAN Support v1.8
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.440000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Sat Mar  8 04:16:29 2014 kern.info kernel: [    2.450000] Freeing unused kernel memory: 264K (8033e000 - 80380000)
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.930000] usbcore: registered new interface driver usbfs
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.930000] usbcore: registered new interface driver hub
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.940000] usbcore: registered new device driver usb
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.960000] ehci-platform: EHCI generic platform driver
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.960000] ehci-platform ehci-platform: EHCI Host Controller
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.970000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Sat Mar  8 04:16:29 2014 kern.info kernel: [    4.980000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.010000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.010000] hub 1-0:1.0: USB hub found
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.020000] hub 1-0:1.0: 1 port detected
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.030000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.340000] usb 1-1: new high-speed USB device number 2 using ehci-platform
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.400000] eth0: link up (1000Mbps/Full duplex)
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.490000] hub 1-1:1.0: USB hub found
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.490000] hub 1-1:1.0: 4 ports detected
Sat Mar  8 04:16:29 2014 kern.info kernel: [    5.780000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
Sat Mar  8 04:16:29 2014 kern.warn kernel: [    7.510000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Sat Mar  8 04:16:29 2014 kern.warn kernel: [    7.520000] jffs2_build_filesystem(): unlocking the mtd device... done.
Sat Mar  8 04:16:29 2014 kern.warn kernel: [    7.520000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
Sat Mar  8 04:16:29 2014 kern.notice kernel: [   25.780000] jffs2: notice: (374) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Sat Mar  8 04:16:29 2014 kern.info kernel: [   26.240000] eth0: link down
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.520000] NET: Registered protocol family 10
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.530000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.540000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.560000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.570000] Backport generated by backports.git backports-20140124-0-g1256d3e
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.580000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.620000] xt_time: kernel timezone is -0000
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.650000] cfg80211: Calling CRDA to update world regulatory domain
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.650000] cfg80211: World regulatory domain updated:
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.660000] cfg80211:  DFS Master region: unset
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.660000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

--- SNIP ---

Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.750000] PPP generic driver version 2.4.2
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.770000] NET: Registered protocol family 24
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: EEPROM regdomain: 0x0
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: EEPROM indicates default country code should be used
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: doing EEPROM country->regdmn map search
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: country maps to regdmn code: 0x3a
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: Country alpha2 being used: US
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.830000] ath: Regpair used: 0x3a
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.840000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.850000] cfg80211: Calling CRDA for country: US
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.850000] cfg80211: Regulatory domain changed to country: US
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.860000] cfg80211:  DFS Master region: FCC
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.860000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

--- SNIP ---

Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.930000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
Sat Mar  8 04:16:29 2014 kern.warn kernel: [   27.940000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: EEPROM regdomain: 0x0
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: EEPROM indicates default country code should be used
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: doing EEPROM country->regdmn map search
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: country maps to regdmn code: 0x3a
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: Country alpha2 being used: US
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.950000] ath: Regpair used: 0x3a
Sat Mar  8 04:16:29 2014 kern.debug kernel: [   27.980000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
Sat Mar  8 04:16:29 2014 kern.info kernel: [   27.980000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
=== Sat Mar  8 04:16:29 2014 user.emerg syslog: Error: Failed to connect to ubus ===
Sat Mar  8 04:16:31 2014 authpriv.info dropbear[887]: Not backgrounding
Sat Mar  8 04:16:32 2014 user.emerg syslog: setting up led USB1
Sat Mar  8 04:16:32 2014 user.emerg syslog: setting up led USB2
Sat Mar  8 04:16:32 2014 user.emerg syslog: setting up led WLAN2G
Sat Mar  8 04:16:32 2014 user.emerg syslog: - init complete -
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.440000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.440000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.460000] device eth0.1 entered promiscuous mode
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.460000] device eth0 entered promiscuous mode
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'lan' is enabled
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'loopback' is enabled
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.480000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.480000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'wan' is enabled
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Network device 'lo' link is up
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'loopback' has link connectivity 
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'loopback' is now up
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.580000] eth0: link up (1000Mbps/Full duplex)
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Network device 'eth0' link is up
Sat Mar  8 04:16:33 2014 daemon.notice netifd: VLAN 'eth0.2' link is up
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'wan' has link connectivity 
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'wan' is setting up now
Sat Mar  8 04:16:33 2014 daemon.notice netifd: VLAN 'eth0.1' link is up
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.630000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.630000] br-lan: port 1(eth0.1) entered forwarding state
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.640000] br-lan: port 1(eth0.1) entered forwarding state
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.650000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.650000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'lan' has link connectivity 
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'lan' is setting up now
Sat Mar  8 04:16:33 2014 daemon.notice netifd: Interface 'lan' is now up
Sat Mar  8 04:16:33 2014 kern.info kernel: [   34.710000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sat Mar  8 04:16:33 2014 daemon.warn odhcpd[862]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Sat Mar  8 04:16:33 2014 daemon.notice netifd: wan (1016): udhcpc (v1.19.4) started
Sat Mar  8 04:16:34 2014 kern.info kernel: [   35.500000] cfg80211: Calling CRDA for country: CA
Sat Mar  8 04:16:34 2014 daemon.notice netifd: wan (1016): Sending discover...
Sat Mar  8 04:16:34 2014 kern.info kernel: [   35.530000] cfg80211: Regulatory domain changed to country: CA
Sat Mar  8 04:16:34 2014 kern.info kernel: [   35.530000] cfg80211:  DFS Master region: unset
Sat Mar  8 04:16:34 2014 kern.info kernel: [   35.540000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

--- SNIP ---

Sat Mar  8 04:16:34 2014 daemon.notice netifd: Interface 'wan6' is enabled
Sat Mar  8 04:16:34 2014 daemon.notice netifd: Network alias 'eth0.2' link is up
Sat Mar  8 04:16:34 2014 daemon.notice netifd: Interface 'wan6' has link connectivity 
Sat Mar  8 04:16:34 2014 daemon.notice netifd: Interface 'wan6' is setting up now
Sat Mar  8 04:16:34 2014 daemon.notice netifd: Interface 'wan' is now up
Sat Mar  8 04:16:34 2014 daemon.warn odhcpd[862]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Sat Mar  8 04:16:34 2014 daemon.notice odhcp6c[1117]: (re)starting transaction on eth0.2
Sat Mar  8 04:16:34 2014 daemon.notice odhcp6c[1117]: Starting SOLICIT transaction (timeout 4294967295s, max rc 0)

Attachments (0)

Change History (8)

comment:1 Changed 4 years ago by CanadianJeff

root@WDR4300:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/ar71xx/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/snapshots.

list of installed packages...

base-files                     151-r39789
busybox                        1.19.4-7
dnsmasq                        2.66-5
dropbear                       2013.59-1
firewall                       2014-02-21
hostapd-common                 20131120-1
ip6tables                      1.4.20-1
iptables                       1.4.20-1
iw                             3.14-1
jshn                           2014-02-23-926121113b903bf7b6133f782c84d0ed6c1a1a58
kernel                         3.10.32-1-9ebf361b7f8cdd09e21ab452d7ccc05e
kmod-ath                       3.10.32+2014-01-23.1-1
kmod-ath9k                     3.10.32+2014-01-23.1-1
kmod-ath9k-common              3.10.32+2014-01-23.1-1
kmod-cfg80211                  3.10.32+2014-01-23.1-1
kmod-crypto-aes                3.10.32-1
kmod-crypto-arc4               3.10.32-1
kmod-crypto-core               3.10.32-1
kmod-gpio-button-hotplug       3.10.32-1
kmod-ip6tables                 3.10.32-1
kmod-ipt-conntrack             3.10.32-1
kmod-ipt-core                  3.10.32-1
kmod-ipt-nat                   3.10.32-1
kmod-ipt-nathelper             3.10.32-1
kmod-ipv6                      3.10.32-1
kmod-leds-gpio                 3.10.32-1
kmod-ledtrig-default-on        3.10.32-1
kmod-ledtrig-netdev            3.10.32-1
kmod-ledtrig-timer             3.10.32-1
kmod-ledtrig-usbdev            3.10.32-1
kmod-lib-crc-ccitt             3.10.32-1
kmod-mac80211                  3.10.32+2014-01-23.1-1
kmod-nls-base                  3.10.32-1
kmod-ppp                       3.10.32-1
kmod-pppoe                     3.10.32-1
kmod-pppox                     3.10.32-1
kmod-slhc                      3.10.32-1
kmod-usb-core                  3.10.32-1
kmod-usb-ohci                  3.10.32-1
kmod-usb2                      3.10.32-1
libblobmsg-json                2014-02-23-926121113b903bf7b6133f782c84d0ed6c1a1a58
libc                           0.9.33.2-1
libgcc                         4.6-linaro-1
libip4tc                       1.4.20-1
libip6tc                       1.4.20-1
libiwinfo                      47
libiwinfo-lua                  47
libjson-c                      0.11-2
libjson-script                 2014-02-23-926121113b903bf7b6133f782c84d0ed6c1a1a58
liblua                         5.1.5-1
libncurses                     5.9-1
libnl-tiny                     0.1-3
libubox                        2014-02-23-926121113b903bf7b6133f782c84d0ed6c1a1a58
libubus                        2014-02-23-334c38918063b5ece164624e20490021b2bff38a
libubus-lua                    2014-02-23-334c38918063b5ece164624e20490021b2bff38a
libuci                         2014-02-18.1-1
libuci-lua                     2014-02-18.1-1
libxtables                     1.4.20-1
lua                            5.1.5-1
luci                           svn-r9960-1
luci-app-firewall              svn-r9960-1
luci-i18n-english              svn-r9960-1
luci-lib-core                  svn-r9960-1
luci-lib-ipkg                  svn-r9960-1
luci-lib-nixio                 svn-r9960-1
luci-lib-sys                   svn-r9960-1
luci-lib-web                   svn-r9960-1
luci-mod-admin-core            svn-r9960-1
luci-mod-admin-full            svn-r9960-1
luci-proto-core                svn-r9960-1
luci-proto-ppp                 svn-r9960-1
luci-sgi-cgi                   svn-r9960-1
luci-theme-base                svn-r9960-1
luci-theme-bootstrap           svn-r9960-1
luci-theme-freifunk-bno        svn-r9960-1
luci-theme-freifunk-generic    svn-r9960-1
luci-theme-openwrt             svn-r9960-1
mtd                            20
nano                           2.2.6-1
netifd                         2014-03-05-4d1a597f65bbb49aa843112812d5ca929478c706
odhcp6c                        2014-03-07-5b98f902f616bd9b96a2128587bc6995555a43c1
odhcpd                         2014-02-24.1-d21af09a10de15f340b5bbd05ddf0603dae0584e
opkg                           9c97d5ecd795709c8584e972bfdf3aee3a5b846d-6
ppp                            2.4.5-10
ppp-mod-pppoe                  2.4.5-10
procd                          2014-02-17-3a225cfa1782763980c86e9811c683ade33012cc
swconfig                       10
terminfo                       5.9-1
uboot-envtools                 2013.10-3
ubox                           2014-01-29-71ea854364833c5dcb0800e092b45fed2c45910e
ubus                           2014-02-23-334c38918063b5ece164624e20490021b2bff38a
ubusd                          2014-02-23-334c38918063b5ece164624e20490021b2bff38a
uci                            2014-02-18.1-1
uhttpd                         2013-11-21-cd66639800ee2882a0867ec54868502eb9b893d8
uhttpd-mod-ubus                2013-11-21-cd66639800ee2882a0867ec54868502eb9b893d8
wireless-tools                 29-5
wpad-mini                      20131120-1

comment:2 Changed 4 years ago by anonymous

happens for me to netgear wndr3800 trunk r40897

comment:3 Changed 4 years ago by anonymous

For my TP-LINK TL-WDR4300 it seems affecting igmpproxy also:

Thu Jul 24 18:46:12 2014 kern.info kernel: [ 10.570000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
Thu Jul 24 18:46:13 2014 user.emerg syslog: Error: Failed to connect to ubus
Thu Jul 24 18:46:16 2014 authpriv.info dropbear[879]: Not backgrounding
Thu Jul 24 18:46:17 2014 user.emerg syslog: setting up led USB1
Thu Jul 24 18:46:18 2014 user.emerg syslog: setting up led USB2
Thu Jul 24 18:46:18 2014 user.emerg syslog: setting up led WLAN2G
Thu Jul 24 18:46:18 2014 user.emerg syslog: Failed to parse message data
Thu Jul 24 18:46:18 2014 user.emerg syslog: Failed to parse message data
Thu Jul 24 18:46:19 2014 user.emerg syslog: Not starting instance igmpproxy::instance1, an error was indicated
Thu Jul 24 18:46:19 2014 user.emerg syslog: - init complete -

comment:4 Changed 4 years ago by anonymous

Same error on a x86 VM booting OpenWRT r41824

comment:5 Changed 3 years ago by yann-kaelig

Same error with WDR4900 v1.3 booting CHAOS CALMER ( Bleeding Edge r42002 )

comment:6 Changed 3 years ago by anonymous

For ubus if things still work look at #15552

comment:7 Changed 3 years ago by deeprootvn@…

I have same issue with TP-Link TL-WR741N/ND v4, use Barrier Breaker 14.07-rc3
errors for ubus and igmpproxy

Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.600000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.610000] msgmni has been set to 55
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.610000] io scheduler noop registered
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.610000] io scheduler deadline registered (default)
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.620000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.630000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.640000] console [ttyATH0] enabled, bootconsole disabled
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.650000] ath79-spi ath79-spi: master is unqueued, this is deprecated
Sun Aug 17 11:08:36 2014 kern.warn kernel: [    0.660000] m25p80 spi0.0: found en25q32b, expected m25p80
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.660000] m25p80 spi0.0: en25q32b (4096 Kbytes)
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.670000] 5 tp-link partitions found on MTD device spi0.0
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.670000] Creating 5 MTD partitions on "spi0.0":
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.680000] 0x000000000000-0x000000020000 : "u-boot"
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.680000] 0x000000020000-0x00000012e4e8 : "kernel"
Sun Aug 17 11:08:36 2014 kern.warn kernel: [    0.690000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.700000] 0x00000012e4e8-0x0000003f0000 : "rootfs"
Sun Aug 17 11:08:36 2014 kern.warn kernel: [    0.710000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.720000] mtd: device 2 (rootfs) set to be root filesystem
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.730000] 1 squashfs-split partitions found on MTD device rootfs
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.730000] 0x000000340000-0x0000003f0000 : "rootfs_data"
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.740000] 0x0000003f0000-0x000000400000 : "art"
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    0.740000] 0x000000020000-0x0000003f0000 : "firmware"
Sun Aug 17 11:08:36 2014 kern.info kernel: [    0.770000] libphy: ag71xx_mdio: probed
Sun Aug 17 11:08:36 2014 kern.info kernel: [    1.320000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.350000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.900000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.910000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.920000] TCP: cubic registered
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.920000] NET: Registered protocol family 17
Sun Aug 17 11:08:36 2014 kern.notice kernel: [    2.930000] Bridge firewalling registered
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.930000] 8021q: 802.1Q VLAN Support v1.8
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.940000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Sun Aug 17 11:08:36 2014 kern.info kernel: [    2.950000] Freeing unused kernel memory: 272K (8034c000 - 80390000)
Sun Aug 17 11:08:36 2014 kern.info kernel: [    7.750000] eth0: link up (1000Mbps/Full duplex)
Sun Aug 17 11:08:36 2014 kern.notice kernel: [   10.540000] jffs2: notice: (321) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 19 of xref (0 dead, 5 orphan) found.
Sun Aug 17 11:08:36 2014 kern.info kernel: [   10.580000] eth0: link down
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.330000] NET: Registered protocol family 10
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.340000] nf_conntrack version 0.5.0 (450 buckets, 1800 max)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.360000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.370000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.380000] Backport generated by backports.git backports-20140320-37-g5c33da0
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.390000] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.440000] xt_time: kernel timezone is -0000
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.490000] cfg80211: Calling CRDA to update world regulatory domain
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.490000] cfg80211: World regulatory domain updated:
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.500000] cfg80211:  DFS Master region: unset
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.500000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.510000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.520000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.530000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.530000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.540000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.550000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.560000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.570000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.640000] PPP generic driver version 2.4.2
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.650000] NET: Registered protocol family 24
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: EEPROM regdomain: 0x0
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: EEPROM indicates default country code should be used
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: doing EEPROM country->regdmn map search
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: country maps to regdmn code: 0x3a
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: Country alpha2 being used: US
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.710000] ath: Regpair used: 0x3a
Sun Aug 17 11:08:36 2014 kern.debug kernel: [   12.720000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.730000] cfg80211: Calling CRDA for country: US
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.740000] cfg80211: Regulatory domain changed to country: US
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.740000] cfg80211:  DFS Master region: FCC
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.740000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.750000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.760000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.770000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.780000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.790000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Sun Aug 17 11:08:36 2014 kern.info kernel: [   12.790000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
Sun Aug 17 11:08:36 2014 user.emerg syslog: Error: Failed to connect to ubus
Sun Aug 17 11:08:39 2014 user.emerg syslog: 'radio0' is disabled
Sun Aug 17 11:08:39 2014 user.emerg syslog: 'radio0' is disabled
Sun Aug 17 11:08:41 2014 authpriv.info dropbear[761]: Not backgrounding
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led WAN
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led LAN1
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led LAN2
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led LAN3
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led LAN4
Sun Aug 17 11:08:43 2014 user.emerg syslog: setting up led WLAN
Sun Aug 17 11:08:44 2014 user.emerg syslog: Failed to parse message data
Sun Aug 17 11:08:44 2014 user.emerg syslog: Failed to parse message data
Sun Aug 17 11:08:44 2014 user.emerg syslog: Failed to parse message data
Sun Aug 17 11:08:44 2014 user.emerg syslog: Not starting instance igmpproxy::instance1, an error was indicated
Sun Aug 17 11:08:44 2014 user.emerg syslog: - init complete -
Sun Aug 17 11:08:45 2014 kern.info kernel: [   24.700000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sun Aug 17 11:08:45 2014 kern.info kernel: [   24.700000] device eth0 entered promiscuous mode
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'lan' is enabled
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'lan' is setting up now
Sun Aug 17 11:08:45 2014 kern.info kernel: [   24.710000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'lan' is now up
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'loopback' is enabled
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'loopback' is now up
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'wan' is enabled
Sun Aug 17 11:08:45 2014 daemon.warn odhcpd[726]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Network device 'lo' link is up
Sun Aug 17 11:08:45 2014 daemon.notice netifd: Interface 'loopback' has link connectivity 
Sun Aug 17 11:08:45 2014 kern.info kernel: [   24.740000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sun Aug 17 11:08:46 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Aug 17 11:08:46 2014 kern.info kernel: [   25.300000] eth0: link up (1000Mbps/Full duplex)
Sun Aug 17 11:08:46 2014 kern.info kernel: [   25.300000] br-lan: port 1(eth0) entered listening state
Sun Aug 17 11:08:46 2014 kern.info kernel: [   25.300000] br-lan: port 1(eth0) entered listening state
Sun Aug 17 11:08:46 2014 kern.info kernel: [   25.310000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sun Aug 17 11:08:46 2014 daemon.notice netifd: Network device 'eth0' link is up
Sun Aug 17 11:08:47 2014 user.emerg syslog: Not starting instance igmpproxy::instance1, an error was indicated
Sun Aug 17 11:08:47 2014 kern.info kernel: [   27.030000] br-lan: port 1(eth0) received tcn bpdu
Sun Aug 17 11:08:47 2014 kern.info kernel: [   27.030000] br-lan: topology change detected, propagating
Sun Aug 17 11:08:48 2014 kern.info kernel: [   27.300000] br-lan: port 1(eth0) entered learning state
Sun Aug 17 11:08:48 2014 kern.info kernel: [   27.340000] eth1: link up (100Mbps/Full duplex)
Sun Aug 17 11:08:48 2014 kern.info kernel: [   27.340000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sun Aug 17 11:08:48 2014 daemon.notice netifd: Network device 'eth1' link is up
Sun Aug 17 11:08:48 2014 daemon.notice netifd: Interface 'wan' has link connectivity 
Sun Aug 17 11:08:48 2014 daemon.notice netifd: Interface 'wan' is setting up now
Sun Aug 17 11:08:48 2014 user.emerg syslog: Not starting instance igmpproxy::instance1, an error was indicated
Sun Aug 17 11:08:49 2014 daemon.info pppd[997]: Plugin rp-pppoe.so loaded.
Sun Aug 17 11:08:49 2014 daemon.info pppd[997]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.6
Sun Aug 17 11:08:49 2014 daemon.notice pppd[997]: pppd 2.4.6 started by root, uid 0
Sun Aug 17 11:08:49 2014 daemon.info pppd[997]: PPP session is 5331
Sun Aug 17 11:08:49 2014 daemon.warn pppd[997]: Connected to 00:90:1a:a2:ae:00 via interface eth1
Sun Aug 17 11:08:49 2014 daemon.info pppd[997]: Using interface pppoe-wan
Sun Aug 17 11:08:49 2014 daemon.notice pppd[997]: Connect: pppoe-wan <--> eth1
Sun Aug 17 11:08:50 2014 kern.info kernel: [   29.300000] br-lan: topology change detected, propagating
Sun Aug 17 11:08:50 2014 kern.info kernel: [   29.300000] br-lan: port 1(eth0) entered forwarding state
Sun Aug 17 11:08:50 2014 kern.info kernel: [   29.300000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Aug 17 11:08:50 2014 daemon.notice netifd: Bridge 'br-lan' link is up
Sun Aug 17 11:08:50 2014 daemon.notice netifd: Interface 'lan' has link connectivity 
Sun Aug 17 11:08:50 2014 kern.info kernel: [   29.490000] br-lan: port 1(eth0) received tcn bpdu
Sun Aug 17 11:08:50 2014 kern.info kernel: [   29.490000] br-lan: topology change detected, propagating
Sun Aug 17 11:08:50 2014 daemon.warn odhcpd[726]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: started, version 2.71 cachesize 150
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq-dhcp[1036]: DHCP, IP range 192.168.1.30 -- 192.168.1.179, lease time 12h
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: using local addresses only for domain lan
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: reading /tmp/resolv.conf.auto
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: using local addresses only for domain lan
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: using nameserver 8.8.8.8#53
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: using nameserver 8.8.4.4#53
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq[1036]: read /etc/hosts - 1 addresses
Sun Aug 17 11:08:50 2014 daemon.info dnsmasq-dhcp[1036]: read /etc/ethers - 0 addresses

comment:8 Changed 3 years ago by nightmare.quake@…

I have the same, r43889. Could it be the reason why dhcp doesn't work at all, neither server and client?:

OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
Decompressing kernel... done!
Starting kernel at 80060000...

[    0.000000] Linux version 3.10.49 (andrew@netbook) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4
.8-2014.04 r42887) ) #5 Mon Jan 12 15:41:46 EET 2015
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001974c (MIPS 74Kc)
[    0.000000] SoC: Atheros AR9344 rev 2
[    0.000000] Clocks: CPU:600.000MHz, DDR:400.000MHz, AHB:400.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  no-uart parts=1 boot_part_size=4194304 gpio=249387 HZ=300
000000 mem=128M kmac=D4:CA:6D:92:A4:7E board=951G ver=3.19 boot=1 mlc=7 console=ttyS0,115200 r
ootfstype=yaffs noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 126448k/131072k available (2213k kernel code, 4624k reserved, 439k data
, 224k init, 0k highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 299.82 BogoMIPS (lpj=1499136)
[    0.070000] pid_max: default: 32768 minimum: 301
[    0.070000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.090000] MIPS: machine is MikroTik RouterBOARD 951G-2HnD
[    0.310000] bio: create slab <bio-0> at 0
[    0.320000] Switching to clocksource MIPS
[    0.320000] NET: Registered protocol family 2
[    0.330000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.330000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.340000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.340000] TCP: reno registered
[    0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.350000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] NET: Registered protocol family 1
[    0.380000] msgmni has been set to 246
[    0.380000] io scheduler noop registered
[    0.390000] io scheduler deadline registered (default)
[    0.390000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.440000] NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-b
it), 128MiB, page size: 2048, OOB size: 64
[    0.450000] Scanning device for bad blocks
[    0.560000] Creating 3 MTD partitions on "ar934x-nfc":
[    0.560000] 0x000000000000-0x000000040000 : "booter"
[    0.570000] 0x000000040000-0x000000400000 : "kernel"
[    0.580000] 0x000000400000-0x000008000000 : "rootfs"
[    0.580000] mtd: device 2 (rootfs) set to be root filesystem
[    0.590000] mtdsplit: no squashfs found in "rootfs"
[    0.590000] mtdsplit: no squashfs found in "ar934x-nfc"
[    0.640000] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[    1.900000] libphy: ag71xx_mdio: probed
[    2.450000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Ath
eros AR8216/AR8236/AR8316]
[    2.460000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[    2.470000] TCP: cubic registered
[    2.480000] NET: Registered protocol family 17
[    2.480000] 8021q: 802.1Q VLAN Support v1.8
[    2.490000] yaffs: dev is 32505858 name is "mtdblock2" ro
[    2.490000] yaffs: passed flags ""
[    2.810000] VFS: Mounted root (yaffs filesystem) readonly on device 31:2.
[    2.820000] Freeing unused kernel memory: 224K (802f8000 - 80330000)
procd: Console is alive
procd: - watchdog -
[    4.190000] usbcore: registered new interface driver usbfs
[    4.200000] usbcore: registered new interface driver hub
[    4.200000] usbcore: registered new device driver usb
[    4.210000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.220000] ehci-platform: EHCI generic platform driver
[    4.230000] ehci-platform ehci-platform: EHCI Host Controller
[    4.230000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    4.240000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    4.270000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    4.270000] hub 1-0:1.0: USB hub found
[    4.280000] hub 1-0:1.0: 1 port detected
[    4.280000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
procd: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    4.600000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    6.450000] eth0: link up (1000Mbps/Full duplex)
mounting /dev/root
[    7.680000] eth0: link down
procd: - early -
procd: - watchdog -
Failed to connect to ubus
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   10.190000] NET: Registered protocol family 10
[   10.210000] zram: Created 1 device(s) ...
[   10.210000] tun: Universal TUN/TAP device driver, 1.6
[   10.220000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   10.250000] l2tp_core: L2TP core driver, V2.0
[   10.260000] l2tp_netlink: L2TP netlink interface
[   10.270000] sit: IPv6 over IPv4 tunneling driver
[   10.310000] gre: GRE over IPv4 demultiplexor driver
[   10.310000] ip_gre: GRE over IPv4 tunneling driver
[   10.340000] nf_conntrack version 0.5.0 (1979 buckets, 7916 max)
[   10.350000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.410000] u32 classifier
[   10.410000]     input device check on
[   10.420000]     Actions configured
[   10.420000] Mirror/redirect action on
[   10.460000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[   10.460000] Backport generated by backports.git backports-20140320-37-g5c33da0
[   10.490000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.580000] usbcore: registered new interface driver usblp
[   10.600000] usbcore: registered new interface driver usbserial
[   10.600000] usbcore: registered new interface driver usbserial_generic
[   10.620000] usbserial: USB Serial support registered for generic
[   10.690000] xt_time: kernel timezone is -0000
[   10.740000] cfg80211: Calling CRDA to update world regulatory domain
[   10.740000] cfg80211: World regulatory domain updated:
[   10.750000] cfg80211:  DFS Master region: unset
[   10.750000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), 
(dfs_cac_time)
[   10.760000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.770000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.780000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.790000] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[   10.800000] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.810000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.810000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.820000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.950000] PPP generic driver version 2.4.2
[   10.960000] PPP MPPE Compression module registered
[   10.960000] NET: Registered protocol family 24
[   10.970000] PPTP driver version 0.8.5
[   11.070000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.080000] usbcore: registered new interface driver option
[   11.100000] usbserial: USB Serial support registered for GSM modem (1-port)
[   11.160000] cfg80211: Calling CRDA for country: US
[   11.160000] cfg80211: Regulatory domain changed to country: US
[   11.170000] cfg80211:  DFS Master region: FCC
[   11.170000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), 
(dfs_cac_time)
[   11.180000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   11.190000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[   11.200000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[   11.210000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   11.220000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   11.230000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[   13.080000] Adding 62460k swap on /dev/zram0.  Priority:-1 extents:1 across:62460k SS
[   19.560000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.570000] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[   19.580000] device eth0.1 entered promiscuous mode
[   19.590000] device eth0 entered promiscuous mode
[   19.590000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   19.630000] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[   21.480000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.480000] device wlan0 entered promiscuous mode
[   21.490000] br-lan: port 2(wlan0) entered forwarding state
[   21.490000] br-lan: port 2(wlan0) entered forwarding state
[   21.540000] eth0: link up (1000Mbps/Full duplex)
[   21.550000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   21.560000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.570000] br-lan: port 2(wlan0) entered disabled state
[   21.570000] br-lan: port 1(eth0.1) entered forwarding state
[   21.580000] br-lan: port 1(eth0.1) entered forwarding state
[   21.580000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   21.590000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[   22.790000] br-lan: port 2(wlan0) entered forwarding state
[   22.800000] br-lan: port 2(wlan0) entered forwarding state
[   22.800000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   23.580000] br-lan: port 1(eth0.1) entered forwarding state
procd: Not starting instance igmpproxy::instance1, an error was indicated
procd: - init complete -
[   24.800000] br-lan: port 2(wlan0) entered forwarding state

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.