Modify

Opened 4 years ago

Closed 3 years ago

#14866 closed defect (fixed)

LED NEUFBOX4 KO & unreconize Model

Reported by: anonymous Owned by: developers
Priority: highest Milestone: Chaos Calmer 15.05
Component: kernel Version: Trunk
Keywords: Cc:

Description

Hi,
My NEUFBOX4 FXC-R2(brcm63XX) unreconize Model in Luci and LED CONFIGURATION doesn't work.

View full kernel log:

[    0.000000] Linux version 3.10.28 (fnord@tschunk) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r39402) ) #1 Mon Jan 27 01:47:01 UTC 2014
[    0.000000] Detected Broadcom 0x6358 CPU revision a1
[    0.000000] CPU frequency is 300 MHz
[    0.000000] 32MB of RAM installed
[    0.000000] registering 40 GPIOs
[    0.000000] board_bcm963xx: Boot address 0xbe000000
[    0.000000] board_bcm963xx: CFE version: 1.0.37-6.4
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
[    0.000000] board_bcm963xx: board name: NB4-FXC-r2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 80312ce0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Memory: 28680k/32768k available (2466k kernel code, 4088k reserved, 717k data, 268k init, 0k highmem)
[    0.000000] NR_IRQS:256
[    0.036000] Calibrating delay loop... 299.26 BogoMIPS (lpj=598528)
[    0.036000] pid_max: default: 32768 minimum: 301
[    0.040000] Mount-cache hash table entries: 512
[    0.048000] NET: Registered protocol family 16
[    0.068000] registering PCI controller with io_map_base unset
[    0.072000] registering PCI controller with io_map_base unset
[    0.092000] bio: create slab <bio-0> at 0
[    0.100000] PCI host bridge to bus 0000:00
[    0.104000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
[    0.108000] pci_bus 0000:00: root bus resource [io  0x8000000-0x8007fff]
[    0.112000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.116000] pci 0000:00:01.0: [14e4:4318] type 00 class 0x028000
[    0.116000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00001fff]
[    0.128000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.128000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30001fff]
[    0.132000] PCI host bridge to bus 0000:01
[    0.136000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
[    0.140000] pci_bus 0000:01: root bus resource [io  0x8008000-0x800ffff]
[    0.144000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[    0.148000] pci 0000:01:1e.0: [14e4:6358] type 02 class 0x060700
[    0.148000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.152000] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[    0.152000] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 05
[    0.152000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
[    0.156000] pci 0000:01:1e.0: BAR 7: assigned [io  0x8008000-0x80080ff]
[    0.160000] pci 0000:01:1e.0: BAR 8: assigned [io  0x8008400-0x80084ff]
[    0.164000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
[    0.168000] pci 0000:01:1e.0:   bridge window [io  0x8008000-0x80080ff]
[    0.172000] pci 0000:01:1e.0:   bridge window [io  0x8008400-0x80084ff]
[    0.176000] pci 0000:01:1e.0:   bridge window [mem 0x38000000-0x3fffffff]
[    0.180000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
[    0.184000] pci 0000:01:1e.0: setting latency timer to 64
[    0.184000] Switching to clocksource MIPS
[    0.196000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
[    0.204000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
[    0.224000] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02
[    0.232000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    0.232000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    0.232000] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    0.232000] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    0.288000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
[    0.296000] NET: Registered protocol family 2
[    0.304000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[    0.312000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[    0.316000] TCP: Hash tables configured (established 512 bind 512)
[    0.324000] TCP: reno registered
[    0.328000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.332000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.340000] NET: Registered protocol family 1
[    0.344000] PCI: CLS 0 bytes, default 16
[    0.348000] audit: initializing netlink socket (disabled)
[    0.356000] type=2000 audit(0.355:1): initialized
[    0.360000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.368000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.380000] msgmni has been set to 56
[    0.384000] io scheduler noop registered
[    0.388000] io scheduler deadline registered (default)
[    0.396000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
[    0.404000] console [ttyS0] enabled, bootconsole disabled
[    0.420000] physmap platform flash device: 02000000 at 1e000000
[    0.428000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022cb
[    0.440000] physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0
[    0.440000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
[    0.440000] physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0
[    0.440000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.444000]   Amd/Fujitsu Extended Query version 1.1.
[    0.448000] number of CFI chips: 1
[    0.452000] bcm63xxpart: CFE boot tag found with version 6 and board type 96358VW
[    0.460000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
[    0.468000] bcm63xxpart: Partition 1 is kernel offset 10100 and length 11ff00
[    0.476000] bcm63xxpart: Partition 2 is rootfs offset 130000 and length 6c0000
[    0.484000] bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000
[    0.488000] bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000
[    0.496000] bcm63xxpart: Spare partition is offset 3c0004 and length 42fffc
[    0.504000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
[    0.512000] Creating 5 MTD partitions on "physmap-flash.0":
[    0.516000] 0x000000000000-0x000000010000 : "CFE"
[    0.524000] 0x000000010100-0x000000130000 : "kernel"
[    0.532000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.548000] 0x000000130000-0x0000007f0000 : "rootfs"
[    0.556000] mtd: device 2 (rootfs) set to be root filesystem
[    0.564000] mtd: partition "rootfs_data" created automatically, ofs=0x3c0000, len=0x430000
[    0.572000] 0x0000003c0000-0x0000007f0000 : "rootfs_data"
[    0.580000] 0x0000007f0000-0x000000800000 : "nvram"
[    0.588000] 0x000000010000-0x0000007f0000 : "linux"
[    0.600000] bcm63xx-spi bcm63xx-spi: at 0xfffe0800 (irq 9, FIFOs size 542)
[    0.612000] spi_gpio spi_gpio.1: master is unqueued, this is deprecated
[    0.620000] 74x164 spi1.0: No device tree data available.
[    0.624000] 74x164: probe of spi1.0 failed with error -22
[    0.640000] libphy: bcm63xx_enet MII bus: probed
[    0.644000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (2)]
[    0.660000] libphy: bcm63xx_enet MII bus: probed
[    0.668000] b53_common: found switch: BCM5325, rev 0
[    0.672000] bcm63xx_enet bcm63xx_enet.1: attached PHY at address 0 [Broadcom B53 (1)]
[    0.688000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
[    0.692000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[    0.704000] TCP: cubic registered
[    0.704000] NET: Registered protocol family 17
[    0.712000] Bridge firewalling registered
[    0.716000] can: controller area network core (rev 20120528 abi 9)
[    0.720000] NET: Registered protocol family 29
[    0.728000] 8021q: 802.1Q VLAN Support v1.8
[    0.732000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[    0.748000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.760000] Freeing unused kernel memory: 268K (8032d000 - 80370000)
[    5.052000] usbcore: registered new interface driver usbfs
[    5.060000] usbcore: registered new interface driver hub
[    5.064000] usbcore: registered new device driver usb
[    5.084000] Button Hotplug driver version 0.4.1
[    5.096000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.104000] ehci-platform: EHCI generic platform driver
[    5.108000] ehci-platform ehci-platform: EHCI Host Controller
[    5.116000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[    5.124000] ehci-platform ehci-platform: irq 18, io mem 0xfffe1300
[    5.144000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
[    5.152000] hub 1-0:1.0: USB hub found
[    5.156000] hub 1-0:1.0: 2 ports detected
[    5.164000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[    5.176000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.184000] ohci-platform ohci-platform: Generic Platform OHCI Controller
[    5.192000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
[    5.200000] ohci-platform ohci-platform: irq 13, io mem 0xfffe1400
[    5.264000] hub 2-0:1.0: USB hub found
[    5.268000] hub 2-0:1.0: 2 ports detected
[    5.276000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[    5.288000] uhci_hcd: USB Universal Host Controller Interface driver
[    5.304000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
[    5.312000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[    7.060000] jffs2: notice: (229) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead, 2 orphan) found.
[   10.412000] NET: Registered protocol family 10
[   11.284000] wl: module license 'unspecified' taints kernel.
[   11.292000] Disabling lock debugging due to kernel taint
[   11.424000] SSB/BCMA glue driver successfully attached
[   11.440000] ------------[ cut here ]------------
[   11.448000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x50/0xc4()
[   11.452000] Modules linked in: wl(P+) wl_glue ipv6 arc4 crypto_blkcipher gpio_keys_polled input_polldev uhci_hcd ohci_hcd ehci_platform ehci_hcd button_hotplug input_core usbcore nls_base usb_common crypto_hash
[   11.472000] CPU: 0 PID: 307 Comm: kmodloader Tainted: P             3.10.28 #1
[   11.480000] Stack : 00000006 00000000 00000000 00000000 00000000 00000000 8039b3be 00000042
[   11.480000] 	  81ad5b10 802bda14 8037b334 8031355b 00000133 81b9c010 c0358000 00000002
[   11.480000] 	  00000000 8002c90c 00000003 8002a298 00000000 00000000 802c0114 81b83984
[   11.480000] 	  00b83984 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   11.480000] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 81b83910
[   11.480000] 	  ...
[   11.516000] Call Trace:
[   11.520000] [<80022374>] show_stack+0x48/0x70
[   11.524000] [<8002a41c>] warn_slowpath_common+0x78/0xa8
[   11.528000] [<8002a464>] warn_slowpath_null+0x18/0x24
[   11.536000] [<80085830>] kmalloc_slab+0x50/0xc4
[   11.540000] [<8009baa8>] __kmalloc+0x20/0x104
[   11.544000] [<80e23c3c>] osl_malloc+0x24/0x6c [wl]
[   11.548000] [<80e15388>] nvram_init+0x58/0xb0 [wl]
[   11.556000] [<80e085f0>] si_pci_fixcfg+0x5d4/0xa18 [wl]
[   11.564000] 
[   11.564000] ---[ end trace 2fb2d922de491f07 ]---
[   11.572000] Got version 2 SPROM from SSB
[   11.588000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
[   11.596000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   11.632000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
[   11.652000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   11.704000] u32 classifier
[   11.708000]     input device check on
[   11.712000]     Actions configured
[   11.720000] Mirror/redirect action on
[   11.740000] usbcore: registered new interface driver cdc_wdm
[   11.768000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.876000] usbcore: registered new interface driver usbserial
[   11.892000] usbcore: registered new interface driver usbserial_generic
[   11.896000] usb 1-2: new high-speed USB device number 2 using ehci-platform
[   11.908000] usbserial: USB Serial support registered for generic
[   12.060000] xt_time: kernel timezone is -0000
[   12.088000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   12.108000] usbcore: registered new interface driver cdc_ether
[   12.124000] usbcore: registered new interface driver cdc_ncm
[   12.168000] PPP generic driver version 2.4.2
[   12.184000] NET: Registered protocol family 24
[   12.204000] qmi_wwan 1-2:1.1: cdc-wdm0: USB WDM device
[   12.288000] qmi_wwan 1-2:1.1 wwan0: register 'qmi_wwan' at usb-ehci-platform-2, WWAN/QMI device, 7e:c5:48:17:fe:19
[   12.300000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   12.312000] usbcore: registered new interface driver qmi_wwan
[   12.328000] usbcore: registered new interface driver rndis_host
[   12.344000] usbcore: registered new interface driver sierra
[   12.356000] usbserial: USB Serial support registered for Sierra USB modem
[   12.372000] usbcore: registered new interface driver sierra_net
[   12.404000] usbcore: registered new interface driver option
[   12.416000] usbserial: USB Serial support registered for GSM modem (1-port)
[   12.424000] option 1-2:1.0: GSM modem (1-port) converter detected
[   12.444000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
[   12.448000] option 1-2:1.2: GSM modem (1-port) converter detected
[   12.456000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   12.472000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
[   12.476000] option 1-2:1.3: GSM modem (1-port) converter detected
[   12.484000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   12.496000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
[   12.512000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
[   16.816000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   18.940000] eth1: link UP - 100/full - flow control off
[   18.952000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   21.108000] device eth1.1 entered promiscuous mode
[   21.112000] device eth1 entered promiscuous mode
[   21.120000] br-lan: port 1(eth1.1) entered forwarding state
[   21.124000] br-lan: port 1(eth1.1) entered forwarding state
[   21.188000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.364000] eth1: link UP - 100/full - flow control off
[   21.392000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
[   23.128000] br-lan: port 1(eth1.1) entered forwarding state
[   34.444000] device wl0 entered promiscuous mode
[   34.448000] br-lan: port 2(wl0) entered forwarding state
[   34.456000] br-lan: port 2(wl0) entered forwarding state
[   36.460000] br-lan: port 2(wl0) entered forwarding state

View System log:

Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.184000] ohci-platform ohci-platform: Generic Platform OHCI Controller
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.192000] ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.200000] ohci-platform ohci-platform: irq 13, io mem 0xfffe1400
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.264000] hub 2-0:1.0: USB hub found
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.268000] hub 2-0:1.0: 2 ports detected
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.276000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.288000] uhci_hcd: USB Universal Host Controller Interface driver
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.304000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
Mon Jan 27 17:05:06 2014 kern.info kernel: [    5.312000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.notice kernel: [    7.060000] jffs2: notice: (229) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 13 of xref (0 dead, 2 orphan) found.
Mon Jan 27 17:05:06 2014 kern.info kernel: [   10.412000] NET: Registered protocol family 10
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.284000] wl: module license 'unspecified' taints kernel.
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.292000] Disabling lock debugging due to kernel taint
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.424000] SSB/BCMA glue driver successfully attached
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.440000] ------------[ cut here ]------------
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.448000] WARNING: at mm/slab_common.c:377 kmalloc_slab+0x50/0xc4()
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.452000] Modules linked in: wl(P+) wl_glue ipv6 arc4 crypto_blkcipher gpio_keys_polled input_polldev uhci_hcd ohci_hcd ehci_platform ehci_hcd button_hotplug input_core usbcore nls_base usb_common crypto_hash
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.472000] CPU: 0 PID: 307 Comm: kmodloader Tainted: P             3.10.28 #1
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] Stack : 00000006 00000000 00000000 00000000 00000000 00000000 8039b3be 00000042
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] 	  81ad5b10 802bda14 8037b334 8031355b 00000133 81b9c010 c0358000 00000002
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] 	  00000000 8002c90c 00000003 8002a298 00000000 00000000 802c0114 81b83984
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] 	  00b83984 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] 	  00000000 00000000 00000000 00000000 00000000 00000000 00000000 81b83910
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.480000] 	  ...
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.516000] Call Trace:
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.520000] [<80022374>] show_stack+0x48/0x70
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.524000] [<8002a41c>] warn_slowpath_common+0x78/0xa8
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.528000] [<8002a464>] warn_slowpath_null+0x18/0x24
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.536000] [<80085830>] kmalloc_slab+0x50/0xc4
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.540000] [<8009baa8>] __kmalloc+0x20/0x104
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.544000] [<80e23c3c>] osl_malloc+0x24/0x6c [wl]
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.548000] [<80e15388>] nvram_init+0x58/0xb0 [wl]
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.556000] [<80e085f0>] si_pci_fixcfg+0x5d4/0xa18 [wl]
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.564000] 
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.564000] ---[ end trace 2fb2d922de491f07 ]---
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.572000] Got version 2 SPROM from SSB
Mon Jan 27 17:05:06 2014 kern.warn kernel: [   11.588000] wl0: Broadcom BCM4318 802.11 Wireless Controller 5.10.56.27
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.596000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.632000] nf_conntrack version 0.5.0 (452 buckets, 1808 max)
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.652000] ip6_tables: (C) 2000-2006 Netfilter Core Team
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.704000] u32 classifier
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.708000]     input device check on
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.712000]     Actions configured
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.720000] Mirror/redirect action on
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.740000] usbcore: registered new interface driver cdc_wdm
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.768000] ip_tables: (C) 2000-2006 Netfilter Core Team
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.876000] usbcore: registered new interface driver usbserial
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.892000] usbcore: registered new interface driver usbserial_generic
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.896000] usb 1-2: new high-speed USB device number 2 using ehci-platform
Mon Jan 27 17:05:06 2014 kern.info kernel: [   11.908000] usbserial: USB Serial support registered for generic
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.060000] xt_time: kernel timezone is -0000
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.088000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.108000] usbcore: registered new interface driver cdc_ether
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.124000] usbcore: registered new interface driver cdc_ncm
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.168000] PPP generic driver version 2.4.2
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.184000] NET: Registered protocol family 24
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.204000] qmi_wwan 1-2:1.1: cdc-wdm0: USB WDM device
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.288000] qmi_wwan 1-2:1.1 wwan0: register 'qmi_wwan' at usb-ehci-platform-2, WWAN/QMI device, 7e:c5:48:17:fe:19
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.300000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.312000] usbcore: registered new interface driver qmi_wwan
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.328000] usbcore: registered new interface driver rndis_host
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.344000] usbcore: registered new interface driver sierra
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.356000] usbserial: USB Serial support registered for Sierra USB modem
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.372000] usbcore: registered new interface driver sierra_net
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.404000] usbcore: registered new interface driver option
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.416000] usbserial: USB Serial support registered for GSM modem (1-port)
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.424000] option 1-2:1.0: GSM modem (1-port) converter detected
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.444000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.448000] option 1-2:1.2: GSM modem (1-port) converter detected
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.456000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.472000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.476000] option 1-2:1.3: GSM modem (1-port) converter detected
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.484000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.496000] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2
Mon Jan 27 17:05:06 2014 kern.info kernel: [   12.512000] platform leds-gpio.0: Driver leds-gpio requests probe deferral
Mon Jan 27 17:05:07 2014 kern.info kernel: [   16.816000] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Mon Jan 27 17:05:09 2014 kern.info kernel: [   18.940000] eth1: link UP - 100/full - flow control off
Mon Jan 27 17:05:09 2014 kern.info kernel: [   18.952000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Mon Jan 27 17:05:11 2014 authpriv.info dropbear[609]: Not backgrounding
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.108000] device eth1.1 entered promiscuous mode
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.112000] device eth1 entered promiscuous mode
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.120000] br-lan: port 1(eth1.1) entered forwarding state
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.124000] br-lan: port 1(eth1.1) entered forwarding state
Mon Jan 27 17:05:11 2014 daemon.notice netifd: Interface 'lan' is now up
Mon Jan 27 17:05:11 2014 daemon.notice netifd: Interface 'loopback' is now up
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.188000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Mon Jan 27 17:05:11 2014 daemon.warn odhcpd[572]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Mon Jan 27 17:05:11 2014 daemon.warn odhcpd[572]: Failed to send to ff02::1%br-lan (Cannot assign requested address)
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.364000] eth1: link UP - 100/full - flow control off
Mon Jan 27 17:05:11 2014 kern.info kernel: [   21.392000] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready
Mon Jan 27 17:05:12 2014 daemon.notice netifd: wan (664): udhcpc (v1.19.4) started
Mon Jan 27 17:05:13 2014 kern.info kernel: [   23.128000] br-lan: port 1(eth1.1) entered forwarding state
Mon Jan 27 17:05:13 2014 daemon.notice netifd: wan (664): Sending discover...
Mon Jan 27 17:05:15 2014 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Mon Jan 27 17:05:15 2014 daemon.notice netifd: mobile (628): Trying to set mode
Mon Jan 27 17:05:16 2014 daemon.notice netifd: wan (664): Sending discover...
Mon Jan 27 17:05:19 2014 daemon.notice netifd: wan (664): Sending discover...
Mon Jan 27 17:05:23 2014 daemon.notice ntpd[928]: ntpd 4.2.6p5@1.2349 Sun Jan 26 22:50:30 UTC 2014 (1)
Mon Jan 27 17:05:23 2014 daemon.notice ntpd[928]: proto: precision = 14.620 usec
Mon Jan 27 17:05:23 2014 daemon.debug ntpd[928]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen and drop on 1 v6wildcard :: UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 2 lo 127.0.0.1 UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 3 br-lan 192.168.1.1 UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 4 lo ::1 UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 5 br-lan fd7e:1ecc:488b::1 UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 6 br-lan fe80::217:33ff:feb0:cf1d UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listen normally on 7 eth1 fe80::217:33ff:feb0:cf1d UDP 123
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: peers refreshed
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Listening on routing socket on fd #24 for interface updates
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Deferring DNS for 0.openwrt.pool.ntp.org 1
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Deferring DNS for 1.openwrt.pool.ntp.org 1
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Deferring DNS for 2.openwrt.pool.ntp.org 1
Mon Jan 27 17:05:23 2014 daemon.info ntpd[928]: Deferring DNS for 3.openwrt.pool.ntp.org 1
Mon Jan 27 17:05:24 2014 kern.info kernel: [   34.444000] device wl0 entered promiscuous mode
Mon Jan 27 17:05:24 2014 kern.info kernel: [   34.448000] br-lan: port 2(wl0) entered forwarding state
Mon Jan 27 17:05:24 2014 kern.info kernel: [   34.456000] br-lan: port 2(wl0) entered forwarding state
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq[968]: started, version 2.66 cachesize 150
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq[968]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq-dhcp[968]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq[968]: using local addresses only for domain lan
Mon Jan 27 17:05:25 2014 daemon.warn dnsmasq[968]: no servers found in /tmp/resolv.conf.auto, will retry
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq[968]: read /etc/hosts - 1 addresses
Mon Jan 27 17:05:25 2014 daemon.info dnsmasq-dhcp[968]: read /etc/ethers - 0 addresses
Mon Jan 27 17:05:25 2014 daemon.err ntpd_intres[941]: host name not found: 0.openwrt.pool.ntp.org
Mon Jan 27 17:05:25 2014 daemon.err ntpd_intres[941]: host name not found: 1.openwrt.pool.ntp.org
Mon Jan 27 17:05:25 2014 daemon.err ntpd_intres[941]: host name not found: 2.openwrt.pool.ntp.org
Mon Jan 27 17:05:26 2014 daemon.err ntpd_intres[941]: host name not found: 3.openwrt.pool.ntp.org
Mon Jan 27 17:05:26 2014 daemon.info dnsmasq[968]: read /etc/hosts - 1 addresses
Mon Jan 27 17:05:26 2014 daemon.info dnsmasq[968]: read /tmp/hosts/6relayd - 0 addresses
Mon Jan 27 17:05:26 2014 daemon.info dnsmasq-dhcp[968]: read /etc/ethers - 0 addresses
Mon Jan 27 17:05:26 2014 kern.info kernel: [   36.460000] br-lan: port 2(wl0) entered forwarding state
Mon Jan 27 17:05:27 2014 daemon.info dnsmasq[968]: read /etc/hosts - 1 addresses
Mon Jan 27 17:05:27 2014 daemon.info dnsmasq[968]: read /tmp/hosts/6relayd - 0 addresses
Mon Jan 27 17:05:27 2014 daemon.info dnsmasq-dhcp[968]: read /etc/ethers - 0 addresses
Mon Jan 27 17:05:29 2014 user.emerg syslog: - init complete -
Mon Jan 27 17:05:29 2014 daemon.notice vnstatd[1050]: vnStat daemon 1.11 started.
Mon Jan 27 17:05:29 2014 daemon.notice vnstatd[1050]: Monitoring: br-lan eth0 
Mon Jan 27 17:05:31 2014 daemon.notice netifd: mobile (628): Timeout setting WWAN mode!
Mon Jan 27 17:05:31 2014 daemon.notice pppd[1098]: pppd 2.4.5 started by root, uid 0
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: abort on (BUSY)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: abort on (NO CARRIER)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: abort on (ERROR)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: report (CONNECT)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: timeout set to 10 seconds
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: send (AT&F^M)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: expect (OK)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: AT&F^M^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: OK
Mon Jan 27 17:05:33 2014 local2.info chat[1128]:  -- got it
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: send (ATE1^M)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: expect (OK)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: ^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: ATE1^M^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: OK
Mon Jan 27 17:05:33 2014 local2.info chat[1128]:  -- got it
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: send (AT+CGDCONT=1,"IP","ebouygtel.com"^M)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: timeout set to 30 seconds
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: expect (OK)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: ^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: AT+CGDCONT=1,"IP","ebouygtel.com"^M^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: OK
Mon Jan 27 17:05:33 2014 local2.info chat[1128]:  -- got it
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: send (ATD*99***1#^M)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: expect (CONNECT)
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: ^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: ATD*99***1#^M^M
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: CONNECT
Mon Jan 27 17:05:33 2014 local2.info chat[1128]:  -- got it
Mon Jan 27 17:05:33 2014 local2.info chat[1128]: send ( ^M)
Mon Jan 27 17:05:33 2014 daemon.info pppd[1098]: Serial connection established.
Mon Jan 27 17:05:33 2014 daemon.info pppd[1098]: Using interface 3g-mobile
Mon Jan 27 17:05:33 2014 daemon.notice pppd[1098]: Connect: 3g-mobile <--> /dev/ttyUSB0
Mon Jan 27 17:05:37 2014 daemon.warn pppd[1098]: Could not determine remote IP address: defaulting to 10.64.64.64
Mon Jan 27 17:05:37 2014 daemon.notice pppd[1098]: local  IP address 10.166.122.51
Mon Jan 27 17:05:37 2014 daemon.notice pppd[1098]: remote IP address 10.64.64.64
Mon Jan 27 17:05:37 2014 daemon.notice pppd[1098]: primary   DNS address 62.201.129.99
Mon Jan 27 17:05:37 2014 daemon.notice pppd[1098]: secondary DNS address 62.201.159.99
Mon Jan 27 17:05:37 2014 daemon.notice netifd: Interface 'mobile' is now up
Mon Jan 27 17:05:38 2014 user.notice firewall: Reloading firewall due to ifup of mobile (3g-mobile)
Mon Jan 27 17:05:39 2014 daemon.info ntpd[928]: Listen normally on 8 3g-mobile 10.166.122.51 UDP 123
Mon Jan 27 17:05:39 2014 daemon.info ntpd[928]: peers refreshed
Mon Jan 27 17:05:39 2014 daemon.debug ntpd[928]: new interface(s) found: waking up resolver
Mon Jan 27 17:05:41 2014 daemon.info dnsmasq[968]: reading /tmp/resolv.conf.auto
Mon Jan 27 17:05:41 2014 daemon.info dnsmasq[968]: using nameserver 62.201.159.99#53
Mon Jan 27 17:05:41 2014 daemon.info dnsmasq[968]: using nameserver 62.201.129.99#53
Mon Jan 27 17:05:41 2014 daemon.info dnsmasq[968]: using local addresses only for domain lan
Mon Jan 27 17:05:42 2014 daemon.info ntpd_intres[941]: DNS 0.openwrt.pool.ntp.org -> 37.59.21.137
Mon Jan 27 17:05:42 2014 daemon.info ntpd_intres[941]: DNS 1.openwrt.pool.ntp.org -> 193.55.167.2
Mon Jan 27 17:05:42 2014 daemon.info ntpd_intres[941]: DNS 2.openwrt.pool.ntp.org -> 2001:bc8:3241:3500::1
Mon Jan 27 17:05:43 2014 daemon.info ntpd_intres[941]: DNS 3.openwrt.pool.ntp.org -> 37.187.56.220
Mon Jan 27 17:06:40 2014 daemon.info pppd[1098]: System time change detected.
Mon Jan 27 17:06:44 2014 user.emerg syslog: Instance sysntpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
Mon Jan 27 17:06:56 2014 daemon.warn pppd[1098]: IPV6CP: timeout sending Config-Requests

http://i39.tinypic.com/29ohlk4.png
http://i40.tinypic.com/2938rus.png

Attachments (0)

Change History (7)

comment:1 follow-up: Changed 4 years ago by florian

The board type looks correctly detected to me, there is one thing that needs fixing, but this is orthogonal:

[    0.620000] 74x164 spi1.0: No device tree data available.
[    0.624000] 74x164: probe of spi1.0 failed with error -22

Can you paste the contents of /proc/cpuinfo?

comment:2 Changed 4 years ago by informatique79@…

Hello, i have in the neufbox4 FXC-R2 :

system type             : bcm63xx/NB4-FXC-r2 (0x6358/0xA1)
machine                 : Unknown
processor               : 0
cpu model               : Broadcom BMIPS4350 V1.0
BogoMIPS                : 299.26
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

Best regards

comment:3 in reply to: ↑ 1 Changed 4 years ago by informatique79@…

Replying to florian:

system type             : bcm63xx/NB4-FXC-r2 (0x6358/0xA1)
machine                 : Unknown
processor               : 0
cpu model               : Broadcom BMIPS4350 V1.0
BogoMIPS                : 299.26
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : yes
hardware watchpoint     : no
isa                     : mips1 mips2 mips32r1
ASEs implemented        :
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

comment:4 Changed 4 years ago by informatique79@…

I find that with the kmod-b43,led configuration OK.
With kmod-brcm-wl led ko

comment:5 follow-up: Changed 4 years ago by florian

Ok, I do not know how to fix the LED issue you are seeing with kmod-brcm-wl. For the board detection in LuCI, I will work on this.

comment:6 in reply to: ↑ 5 Changed 4 years ago by informatique79@…

Replying to florian:

Where is the problem?

Do you have the solution?

comment:7 Changed 3 years ago by jogo

  • Resolution set to fixed
  • Status changed from new to closed

The model should now be properly displayed in Luci.

Regarding the wifi led issue with wl this is a wontfix, as wl is a closed source driver, so we can't really properly debug or fix there. If you care about the led, use b43, nowadays it should work comparable to wl for bcm4318 and other 11g chips.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.