Modify

Opened 4 years ago

Last modified 3 years ago

#14855 new defect

luci can't get correct information of wireless, show Wireless is disabled or not associated

Reported by: guotao945@… Owned by:
Priority: response-needed Milestone: Barrier Breaker 14.07
Component: luci Version: Trunk
Keywords: Cc:

Description

can't enable wireless, show Wireless is disabled or not associated

but I can't find the AP

Cell 02 - Address: E6:8B:54:21:25:98

Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=70/70 Signal level=-15 dBm
Encryption key:off
ESSID:"OpenWrt"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s

9 Mb/s; 12 Mb/s; 18 Mb/s

Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000000092249d8a
Extra: Last beacon: 7483ms ago
IE: Unknown: 00074F70656E577274
IE: Unknown: 010882848B960C121824
IE: Unknown: 03010B
IE: Unknown: 2A0100
IE: Unknown: 32043048606C
IE: Unknown: 2D1AEC111BFFFF000000000000000000000100000000000000000000
IE: Unknown: 3D160B000000000000000000000000000000000000000000
IE: Unknown: 7F080000000000000040
IE: Unknown: DD180050F2020101000003A4000027A4000042435D0062322E00

other information

http://192.168.1.1/cgi-bin/luci/;stok=8958bb4413c43b569dfd74d4bbad8979/admin/network/wireless_status/radio0.network1

[ { "ifname": "radio0.network1", "encryption": "None", "bssid": "00:00:00:00:00:00", "mode": "Master", "quality": 0, "noise": 0, "ssid": "OpenWrt", "link": "/cgi-bin/luci/;stok=6f6eb093cf52dc8f6f79269806dcc1d8/admin/network/wireless/radio0.network1", "id": "radio0.network1", "txpoweroff": 0, "device": { "device": "radio0", "name": "Generic 802.11bgn Wireless Controller (radio0)", "up": false }, "country": "US", "txpower": 0, "name": "Master \u0022OpenWrt\u0022", "channel": 11, "assoclist": { }, "signal": 0, "up": false, "frequency": "2.462" } ]

root@OpenWrt:/# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type=mac80211
wireless.radio0.channel=11
wireless.radio0.hwmode=11ng
wireless.radio0.path=pci0000:00/0000:00:00.0
wireless.radio0.htmode=HT20
wireless.radio0.ht_capab=SHORT-GI-20 SHORT-GI-40 TX-STBC RX-STBC1 DSSS_CCK-40
wireless.radio0.disabled=0
wireless.@wifi-iface[0]=wifi-iface
wireless.@wifi-iface[0].device=radio0
wireless.@wifi-iface[0].network=lan
wireless.@wifi-iface[0].mode=ap
wireless.@wifi-iface[0].ssid=OpenWrt
wireless.@wifi-iface[0].encryption=none

root@OpenWrt:/# iw wlan0 info
Interface wlan0

ifindex 13
wdev 0x7
addr e6:8b:54:21:25:98
ssid OpenWrt
type AP
wiphy 0
channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz

root@OpenWrt:/# iw phy0 info
Wiphy phy0

max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Available Antennas: TX 0x3 RX 0x3
Configured Antennas: TX 0x3 RX 0x3
Supported interface modes:

  • IBSS
  • managed
  • AP
  • AP/VLAN
  • WDS
  • monitor
  • mesh point
  • P2P-client
  • P2P-GO

Band 1:

Capabilities: 0x11ee

HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40

Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Frequencies:

  • 2412 MHz [1] (27.0 dBm)
  • 2417 MHz [2] (27.0 dBm)
  • 2422 MHz [3] (27.0 dBm)
  • 2427 MHz [4] (27.0 dBm)
  • 2432 MHz [5] (27.0 dBm)
  • 2437 MHz [6] (27.0 dBm)
  • 2442 MHz [7] (27.0 dBm)
  • 2447 MHz [8] (27.0 dBm)
  • 2452 MHz [9] (27.0 dBm)
  • 2457 MHz [10] (27.0 dBm)
  • 2462 MHz [11] (27.0 dBm)
  • 2467 MHz [12] (disabled)
  • 2472 MHz [13] (disabled)
  • 2484 MHz [14] (disabled)

valid interface combinations:

  • #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, #{ IBSS } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match
  • #{ IBSS, AP } <= 1, total <= 1, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz }

HT Capability overrides:

  • MCS: ff ff ff ff ff ff ff ff ff ff
  • maximum A-MSDU length
  • supported channel width
  • short GI for 40 MHz
  • max A-MPDU length exponent
  • min MPDU start spacing

Attachments (0)

Change History (8)

comment:1 follow-up: Changed 4 years ago by jow

  • Priority changed from normal to response-needed

OpenWrt version? LuCI version?
Do you use a persistent /var?

comment:2 follow-up: Changed 4 years ago by Dakaix

Also experiencing this on a DIR-505, fresh configuration using latest OpenWRT trunk (151-r39382).

comment:3 in reply to: ↑ 1 Changed 4 years ago by anonymous

Replying to jow:

OpenWrt version? LuCI version?
Do you use a persistent /var?

Sorry for late, I test OpenWrt Barrier Breaker r39535 / LuCI Trunk (svn-r9953) and still have this problem.

What is persistent /var ?

comment:4 in reply to: ↑ 2 Changed 4 years ago by anonymous

Replying to Dakaix:

Also experiencing this on a DIR-505, fresh configuration using latest OpenWRT trunk (151-r39382).

Do you mean FACTORY RESET? Doesn't work.

comment:5 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

comment:6 follow-up: Changed 3 years ago by anonymous

I've been experiencing the same on:

Router: TPLINK-741ND V2.4

openwrt version: CHAOS CALMER (Bleeding Edge, r43013)
luci version: luci - git-14.293.63928-ff65318-1


root@OpenWrt:~# iwinfo
wlan0 ESSID: "SomeWifi"

Access Point: F4:EC:38:F8:B7:E2
Mode: Master Channel: 11 (2.462 GHz)
Tx-Power: 17 dBm Link Quality: 53/70
Signal: -57 dBm Noise: -95 dBm
Bit Rate: 37.5 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11bgn
Hardware: 168C:002B 168C:A091 [Atheros AR9285]
TX power offset: none
Frequency offset: none
Supports VAPs: yes PHY name: phy0

wlan0-1 ESSID: "SomeGuest"

Access Point: F6:EC:38:F8:B7:E2
Mode: Master Channel: 11 (2.462 GHz)
Tx-Power: 17 dBm Link Quality: unknown/70
Signal: unknown Noise: -95 dBm
Bit Rate: unknown
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11bgn
Hardware: 168C:002B 168C:A091 [Atheros AR9285]
TX power offset: none
Frequency offset: none
Supports VAPs: yes PHY name: phy0

comment:7 in reply to: ↑ 6 ; follow-up: Changed 3 years ago by hnyman

Replying to anonymous:

openwrt version: CHAOS CALMER (Bleeding Edge, r43013)
luci version: luci - git-14.293.63928-ff65318-1

Bug in ff65318 has already been fixed by ecb0c2f :
https://github.com/openwrt/luci/commit/ecb0c2f11b861e5035b0397d2396ee4b5e9b3c3e

comment:8 in reply to: ↑ 7 Changed 3 years ago by anonymous

Replying to hnyman:

Replying to anonymous:

openwrt version: CHAOS CALMER (Bleeding Edge, r43013)
luci version: luci - git-14.293.63928-ff65318-1

Bug in ff65318 has already been fixed by ecb0c2f :
https://github.com/openwrt/luci/commit/ecb0c2f11b861e5035b0397d2396ee4b5e9b3c3e

The fix parses the WiFi info output correctly.
Thanks!

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.