Modify

Opened 4 years ago

Closed 4 years ago

Last modified 4 years ago

#14277 closed defect (worksforme)

"Glob failed" multiple times since 38022, no network

Reported by: janssensm Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: Cc:

Description

Since changeset 38022 my WZR-HP-G450H has major problems.
Cant connect to it anymore via network, I could connect via ftdi cable, so I could log it. See log beneath.
Flashing via tftp still works so that's how I investigated which changeset the issue was introduced.

Tried changeset 38017-38022.
38021 is still fine, but 38022 gives me these issues.
In changeset 38303 this issue still remains.

The log displays multiple times glob failes at the end.

Maybe #14177 has the same issues.

BUFFALO U-BOOT Ver 1.00
  == CPU:400MHz, DDR:400MHz, AHB:200MHz ==
AP111 (ar7241 - Virian) U-boot
DRAM:  64 MB
WAN port disabling: done
Top of RAM usable for U-Boot at: 84000000
Reserving 258k for U-Boot at: 83fbc000
Reserving 192k for malloc() at: 83f8c000
Reserving 44 Bytes for Board Info at: 83f8bfd4
Reserving 36 Bytes for Global Data at: 83f8bfb0
Reserving 128k for boot params() at: 83f6bfb0
Stack Pointer at: 83f6bf98
Now running in RAM - U-Boot at: 83fbc000
flash bank #0 found 16 MB flash [W25Q128BV, blk:0x10000, sectors:256]
flash bank #1 found 16 MB flash [W25Q128BV, blk:0x10000, sectors:256]
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Memory Test (address line)
uboot use  83F6BFB0 - 84000000
Memory Test start(0x80000000) end(0x83F00000) size(67108864)                    
Data line test start:0x80000000 pattern 0x00000001 0x00000003 0x00000007 0x0000 
Address line test start:0x80000000 len:0x3f00000 pattern 0xAAAAAAAA 0x55555555  
Fill test patnum:5                                                              
fill Pattern 5555AAAA  Writing...   Reading...                                  
fill Pattern AAAA5555  Writing...   Reading...                                  
fill Pattern 0000FFFF  Writing...   Reading...                                  
fill Pattern FFFF0000  Writing...   Reading...                                  
fill Pattern AAAAAAAA  Writing...   Reading...                                  
Memory Test OK                                                                  
### buf_ver=[1.00] U-Boot Ver.=[1.00]                                           
### build_date(env)=[Apr  6 2011 - 08:52:48] build_date(bin)=[Apr  6 2011 - 08:]
ag7240_enet_initialize...                                                       
Reading MAC Address from ENV(0x83f8c322)                                        
No valid address in Flash. Using fixed address                                  
Virian MDC CFG Value ==> 4                                                      
: cfg1 0x7 cfg2 0x7114                                                          
eth0: 02:aa:bb:cc:dd:23                                                         
athrs16_reg_init: complete                                                      
eth0 up                                                                         
Virian MDC CFG Value ==> 4                                                      
: cfg1 0xf cfg2 0x7214                                                          
eth1: 00:03:7f:09:0b:ad                                                         
eth1 up                                                                         
eth0  02:AA:BB:CC:DD:23                                                         
, eth1  00:03:7F:09:0B:AD                                                       
                                                                                
dup 1 speed 1000                                                                
                                                                                
tftp server(receive) go, waiting:4[sec]                                         
Load address: 0x81f00000                                                        
                                                                                
TftpServer Timeout;                                                             
no file was loaded.                                                             
LAN port disabling: done                                                        
                                                                                
## Checking Image at bf060000 ...                                               
   Image Name:   MIPS OpenWrt Linux-3.10.12                                     
   Created:      2013-10-04  19:08:40 UTC                                       
   Image Type:   MIPS Linux Kernel Image (lzma compressed)                      
   Data Size:    932130 Bytes = 910.3 kB                                        
   Load Address: 80060000                                                       
   Entry Point:  80060000                                                       
   Verifying Checksum ... crc32_fw: bf060040 - bf143961 (len:000e3922) calc...  
crc32_fw: range1 bf060040 - bf143961                                            
OK                                                                              
change bootargs                                                                 
console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init mtdparts=ar724M
## Booting image at bf060000 ...                                                
   Image Name:   MIPS OpenWrt Linux-3.10.12                                     
   Created:      2013-10-04  19:08:40 UTC                                       
   Image Type:   MIPS Linux Kernel Image (lzma compressed)                      
   Data Size:    932130 Bytes = 910.3 kB                                        
   Load Address: 80060000                                                       
   Entry Point:  80060000                                                       
   Uncompressing Kernel Image ... OK                                            
No initrd                                                                       
## Transferring control to Linux (at address 80060000) ...                      
## Giving linux memsize in bytes, 67108864                                      
                                                                                
Starting kernel ...                                                             
                                                                                
[    0.000000] Linux version 3.10.12 (user@computer) (gcc version 4.6.4 (Ope3
[    0.000000] bootconsole [early0] enabled                                     
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)                            
[    0.000000] SoC: Atheros AR7242 rev 1                                        
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:5.00z
[    0.000000] Determined physical RAM map:                                     
[    0.000000]  memory: 04000000 @ 00000000 (usable)                            
[    0.000000] Initrd not found or empty - disabling initrd                     
[    0.000000] Zone ranges:                                                     
[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]                           
[    0.000000] Movable zone start for each node                                 
[    0.000000] Early memory node ranges                                         
[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]                          
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.  
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32s
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pa6
[    0.000000] Kernel command line:  board=WZR-HP-G450H console=ttyS0,115200 rod
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)              
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)    
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)     
[    0.000000] Writing ErrCtl register=00000000                                 
[    0.000000] Readback ErrCtl register=00000000                                
[    0.000000] Memory: 61528k/65536k available (2178k kernel code, 4008k reserv)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1       
[    0.000000] NR_IRQS:51                                                       
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)          
[    0.080000] pid_max: default: 32768 minimum: 301                             
[    0.080000] Mount-cache hash table entries: 512                              
[    0.090000] NET: Registered protocol family 16                               
[    0.100000] MIPS: machine is Buffalo WZR-HP-G450H                            
[    0.330000] registering PCI controller with io_map_base unset                
[    0.340000] bio: create slab <bio-0> at 0                                    
[    0.350000] PCI host bridge to bus 0000:00                                   
[    0.350000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]   
[    0.360000] pci_bus 0000:00: root bus resource [io  0x0000]                  
[    0.360000] pci_bus 0000:00: No busn resource found for root bus, will use []
[    0.370000] pci 0000:00:00.0: invalid calibration data                       
[    0.370000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64b]
[    0.380000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pre]
[    0.380000] pci 0000:00:00.0: using irq 40 for pin 1                         
[    0.390000] Switching to clocksource MIPS                                    
[    0.390000] NET: Registered protocol family 2                                
[    0.400000] TCP established hash table entries: 512 (order: 0, 4096 bytes)   
[    0.400000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)         
[    0.410000] TCP: Hash tables configured (established 512 bind 512)           
[    0.410000] TCP: reno registered                                             
[    0.420000] UDP hash table entries: 256 (order: 0, 4096 bytes)               
[    0.420000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)          
[    0.430000] NET: Registered protocol family 1                                
[    0.450000] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
[    0.460000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[    0.470000] msgmni has been set to 120                                       
[    0.470000] io scheduler noop registered                                     
[    0.480000] io scheduler deadline registered (default)                       
[    0.480000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled         
[    0.510000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A    
[    0.520000] console [ttyS0] enabled, bootconsole disabled                    
[    0.520000] console [ttyS0] enabled, bootconsole disabled                    
[    0.530000] ath79-spi ath79-spi: master is unqueued, this is deprecated      
[    0.540000] m25p80 spi0.0: found w25q128, expected m25p80                    
[    0.540000] m25p80 spi0.0: w25q128 (16384 Kbytes)                            
[    0.550000] m25p80 spi0.1: found w25q128, expected m25p80                    
[    0.560000] m25p80 spi0.1: w25q128 (16384 Kbytes)                            
[    0.560000] Concatenating MTD devices:                                       
[    0.570000] (0): "spi0.0"                                                    
[    0.570000] (1): "spi0.1"                                                    
[    0.570000] into device "flash"                                              
[    0.580000] Creating 5 MTD partitions on "flash":                            
[    0.590000] 0x000000000000-0x000000040000 : "u-boot"                         
[    0.590000] 0x000000040000-0x000000050000 : "u-boot-env"                     
[    0.600000] 0x000000050000-0x000000060000 : "ART"                            
[    0.610000] 0x000000060000-0x000001fe0000 : "firmware"                       
[    0.610000] 0x000000150000-0x000001fe0000 : "rootfs"                         
[    0.620000] mtd: partition "rootfs" set to be root filesystem                
[    0.630000] mtd: partition "rootfs_data" created automatically, ofs=0x5200000
[    0.640000] 0x000000520000-0x000001fe0000 : "rootfs_data"                    
[    0.640000] 0x000001fe0000-0x000002000000 : "user_property"                  
[    0.660000] switch0: Atheros AR8316 rev. 1 switch registered on ag71xx-mdio.0
[    0.660000] libphy: ag71xx_mdio: probed                                      
[    0.670000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII            
[    1.230000] ar8316: Using port 4 as switch port                              
[    1.390000] ag71xx ag71xx.0 eth0: connected to PHY at ag71xx-mdio.0:00 [uid=]
[    1.400000] TCP: cubic registered                                            
[    1.400000] NET: Registered protocol family 17                               
[    1.410000] 8021q: 802.1Q VLAN Support v1.8                                  
[    1.420000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. 
[    1.430000] Freeing unused kernel memory: 224K (802e8000 - 80320000)         
procd: Console is alive                                                         
procd: - watchdog -                                                             
[    4.190000] usbcore: registered new interface driver usbfs                   
[    4.200000] usbcore: registered new interface driver hub                     
[    4.210000] usbcore: registered new device driver usb                        
[    4.220000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    4.220000] ehci-platform: EHCI generic platform driver                      
[    4.230000] ehci-platform ehci-platform: EHCI Host Controller                
[    4.240000] ehci-platform ehci-platform: new USB bus registered, assigned bu1
[    4.240000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000            
[    4.270000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00          
[    4.270000] hub 1-0:1.0: USB hub found                                       
[    4.280000] hub 1-0:1.0: 1 port detected                                     
kmod: ran 19 iterations                                                         
procd: - preinit -                                                              
Press the [f] key and hit [enter] to enter failsafe mode                        
[    6.450000] eth0: link up (1000Mbps/Full duplex)                             
mount_root: jffs2 is ready                                                      
[    7.950000] jffs2: notice: (297) jffs2_build_xattr_subsystem: complete build.
[    7.990000] eth0: link down                                                  
procd: - early -                                                                
procd: - watchdog -                                                             
procd: - init -                                                                 
Please press Enter to activate this console.                                    
[   10.150000] Loading modules backported from Linux version master-2013-06-27-5
[   10.160000] Backport generated by backports.git backports-20130617-4-ge3220f5
[   10.180000] nf_conntrack version 0.5.0 (964 buckets, 3856 max)               
[   10.240000] xt_time: kernel timezone is -0000                                
[   10.290000] cfg80211: Calling CRDA to update world regulatory domain         
[   10.290000] cfg80211: World regulatory domain updated:                       
[   10.300000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_ga)
[   10.310000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.310000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2)
[   10.320000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2)
[   10.330000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.340000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.360000] ip_tables: (C) 2000-2006 Netfilter Core Team                     
[   10.440000] PPP generic driver version 2.4.2                                 
[   10.450000] NET: Registered protocol family 24                               
[   10.500000] cfg80211: Calling CRDA for country: US                           
[   10.510000] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xb0000000, irq=40      
[   10.530000] cfg80211: Regulatory domain changed to country: US               
[   10.530000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_ga)
[   10.540000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.550000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1)
[   10.550000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.560000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.570000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2)
[   10.580000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3)
[   14.510000] device eth0.1 entered promiscuous mode                           
[   14.510000] device eth0 entered promiscuous mode                             
[   15.720000] eth0: link up (1000Mbps/Full duplex)                             
[   15.730000] br-lan: port 1(eth0.1) entered forwarding state                  
[   15.730000] br-lan: port 1(eth0.1) entered forwarding state                  
[   17.730000] br-lan: port 1(eth0.1) entered forwarding state                  
glob failed on /etc/init.d/S21log                                               
glob failed on /etc/init.d/S50cron                                              
glob failed on /etc/init.d/S50dropbear                                          
glob failed on /etc/init.d/S50sshd                                              
glob failed on /etc/init.d/S50telnet                                            
glob failed on /etc/init.d/S98sysntpd                                           
procd: - init complete -                                                        


Attachments (0)

Change History (2)

comment:1 Changed 4 years ago by nbd

  • Resolution set to worksforme
  • Status changed from new to closed

Try resetting your config and run make dirclean. Seems to be an issue in your build tree.

comment:2 Changed 4 years ago by janssensm

Thanks for your response. You are right.
Cleaning up and especially resetting config worked.
I will remind myself to clean more frequently, I never had this kind of issue.
Sorry for filing it as a bug. And many thanks for maintaining OpenWrt!!

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.