Modify

Opened 4 years ago

Closed 4 years ago

Last modified 4 years ago

#14168 closed defect (fixed)

ASUS WL-500Gp - rebooting after upgrade to trunk

Reported by: skrzyp Owned by: hauke
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description

Hi. Here is log from serial console.

{{{CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Ą| 10¤ë 12 22:21:19 CST 2006 (root@…)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes

Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-1B-FC-45-35-D7, ipaddr 192.168.1.1, mask 255.255.255.0

gateway not set, nameserver not set

Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3780 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 3.10.12 (fnord@tschunk) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38
002) ) #1 Mon Sep 16 03:54:43 UTC 2013
[ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300)
[ 0.000000] bcm47xx: using ssb bus
[ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00
[ 0.000000] Unsupported SPROM revision 0 detected. Will extract v1
[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28872k/32768k available (2528k kernel code, 3896k reserved, 591k data, 204k init, 0k

highmem)

[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled
[ 0.076000] Calibrating delay loop... 262.14 BogoMIPS (lpj=524288)
[ 0.116000] pid_max: default: 32768 minimum: 301
[ 0.120000] Mount-cache hash table entries: 512
[ 0.132000] NET: Registered protocol family 16
[ 0.168000] bio: create slab <bio-0> at 0
[ 0.180000] Switching to clocksource MIPS
[ 0.500000] PCI host bridge to bus 0000:00
[ 0.504000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
[ 0.508000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.516000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.524000] ssb: PCI: Fixing up bridge 0000:00:00.0
[ 0.528000] ssb: PCI: Fixing up device 0000:00:00.0
[ 0.536000] ssb: PCI: Fixing latency timer of device 0000:00:00.0 to 168
[ 0.548000] pci 0000:00:02.0: BAR 0: assigned [mem 0x40000000-0x4000ffff]
[ 0.556000] pci 0000:00:03.2: BAR 0: assigned [mem 0x40010000-0x400100ff]
[ 0.564000] pci 0000:00:03.0: BAR 4: assigned [io 0x0400-0x041f]
[ 0.572000] pci 0000:00:03.1: BAR 4: assigned [io 0x0420-0x043f]
[ 0.588000] NET: Registered protocol family 2
[ 0.596000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.604000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.608000] TCP: Hash tables configured (established 512 bind 512)
[ 0.616000] TCP: reno registered
[ 0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.624000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.632000] NET: Registered protocol family 1
[ 0.644000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.652000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, I
nc.
[ 0.664000] msgmni has been set to 56
[ 0.668000] io scheduler noop registered
[ 0.672000] io scheduler deadline registered (default)
[ 0.680000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.708000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.736000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.780000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.808000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.824000] physmap platform flash device: 02000001 at 1c000000
[ 0.828000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID

0x001301

[ 0.840000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.844000] Amd/Fujitsu Extended Query version 1.3.
[ 0.852000] number of CFI chips: 1
[ 0.864000] 6 bcm47xxpart partitions found on MTD device physmap-flash.0
[ 0.872000] Creating 6 MTD partitions on "physmap-flash.0":
[ 0.876000] 0x000000000000-0x000000040000 : "boot"
[ 0.888000] 0x000000040000-0x0000007f0000 : "linux"
[ 0.900000] 0x00000004001c-0x000000040960 : "loader"
[ 0.908000] 0x000000040960-0x00000014d400 : "kernel"
[ 0.916000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than
an erase block -- forcing read-only
[ 0.932000] 0x00000014d400-0x0000007f0000 : "rootfs"
[ 0.936000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than
an erase block -- forcing read-only
[ 0.956000] mtd: partition "rootfs" set to be root filesystem
[ 0.960000] mtd: partition "rootfs_data" created automatically, ofs=0x320000, len=0x4d0000
[ 0.968000] 0x000000320000-0x0000007f0000 : "rootfs_data"
[ 0.980000] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.000000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 1.008000] TCP: cubic registered
[ 1.012000] NET: Registered protocol family 17
[ 1.020000] Bridge firewalling registered
[ 1.024000] 8021q: 802.1Q VLAN Support v1.8
[ 1.044000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.052000] Freeing unused kernel memory: 204K (8030d000 - 80340000)
procd: Console is alive
procd: - watchdog -
[ 3.796000] pps_core: LinuxPPS API ver. 1 registered
[ 3.800000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@…>
[ 3.816000] PTP clock support registered
[ 4.000000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 4.024000] libphy: b44_eth_mii: probed
[ 4.028000] Found board: "Asus WL500GP V1"
[ 4.104000] b53_common: found switch: BCM5325, rev 0
[ 4.112000] b44 ssb0:0 (unregistered net_device): attached PHY driver [Broadcom B53 (1)] (mii_bus:phy_ad
dr=1:1e)
[ 4.124000] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:1b:fc:45:35:d7

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Ą| 10¤ë 12 22:21:19 CST 2006 (root@…)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes

Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-1B-FC-45-35-D7, ipaddr 192.168.1.1, mask 255.255.255.0

gateway not set, nameserver not set

Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3780 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Ą| 10¤ë 12 22:21:19 CST 2006 (root@…)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes

Total memory used by CFE: 0x80800000 - 0x8089AF40 (634688)
Initialized Data: 0x808313D0 - 0x80833790 (9152)
BSS Area: 0x80833790 - 0x80834F40 (6064)
Local Heap: 0x80834F40 - 0x80898F40 (409600)
Stack Area: 0x80898F40 - 0x8089AF40 (8192)
Text (code) segment: 0x80800000 - 0x808313D0 (201680)
Boot area (physical): 0x0089B000 - 0x008DB000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-1B-FC-45-35-D7, ipaddr 192.168.1.1, mask 255.255.255.0

gateway not set, nameserver not set

Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3780 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
[ 0.000000] Linux version 3.10.12 (fnord@tschunk) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r38
002) ) #1 Mon Sep 16 03:54:43 UTC 2013
[ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300)
[ 0.000000] bcm47xx: using ssb bus
[ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00
[ 0.000000] Unsupported SPROM revision 0 detected. Will extract v1
[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
[ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28872k/32768k available (2528k kernel code, 3896k reserved, 591k data, 204k init, 0k

highmem)

[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled
[ 0.076000] Calibrating delay loop... 262.14 BogoMIPS (lpj=524288)
[ 0.116000] pid_max: default: 32768 minimum: 301
[ 0.120000] Mount-cache hash table entries: 512
[ 0.132000] NET: Registered protocol family 16
[ 0.168000] bio: create slab <bio-0> at 0
[ 0.180000] Switching to clocksource MIPS
[ 0.500000] PCI host bridge to bus 0000:00
[ 0.504000] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff]
[ 0.508000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff]
[ 0.516000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.524000] ssb: PCI: Fixing up bridge 0000:00:00.0
[ 0.528000] ssb: PCI: Fixing up device 0000:00:00.0
[ 0.536000] ssb: PCI: Fixing latency timer of device 0000:00:00.0 to 168
[ 0.548000] pci 0000:00:02.0: BAR 0: assigned [mem 0x40000000-0x4000ffff]
[ 0.556000] pci 0000:00:03.2: BAR 0: assigned [mem 0x40010000-0x400100ff]
[ 0.564000] pci 0000:00:03.0: BAR 4: assigned [io 0x0400-0x041f]
[ 0.572000] pci 0000:00:03.1: BAR 4: assigned [io 0x0420-0x043f]
[ 0.588000] NET: Registered protocol family 2
[ 0.596000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.604000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.608000] TCP: Hash tables configured (established 512 bind 512)
[ 0.616000] TCP: reno registered
[ 0.620000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.624000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.632000] NET: Registered protocol family 1
[ 0.644000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.652000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, I
nc.
[ 0.664000] msgmni has been set to 56
[ 0.668000] io scheduler noop registered
[ 0.672000] io scheduler deadline registered (default)
[ 0.680000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.708000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.736000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.780000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
[ 0.808000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
[ 0.824000] physmap platform flash device: 02000001 at 1c000000
[ 0.828000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID

0x001301

[ 0.840000] Amd/Fujitsu Extended Query Table at 0x0040
[ 0.844000] Amd/Fujitsu Extended Query version 1.3.
[ 0.852000] number of CFI chips: 1
[ 0.864000] 6 bcm47xxpart partitions found on MTD device physmap-flash.0
[ 0.872000] Creating 6 MTD partitions on "physmap-flash.0":
[ 0.876000] 0x000000000000-0x000000040000 : "boot"
[ 0.888000] 0x000000040000-0x0000007f0000 : "linux"
[ 0.900000] 0x00000004001c-0x000000040960 : "loader"
[ 0.908000] 0x000000040960-0x00000014d400 : "kernel"
[ 0.916000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than
an erase block -- forcing read-only
[ 0.932000] 0x00000014d400-0x0000007f0000 : "rootfs"
[ 0.936000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than
an erase block -- forcing read-only
[ 0.956000] mtd: partition "rootfs" set to be root filesystem
[ 0.960000] mtd: partition "rootfs_data" created automatically, ofs=0x320000, len=0x4d0000
[ 0.968000] 0x000000320000-0x0000007f0000 : "rootfs_data"
[ 0.980000] 0x0000007f0000-0x000000800000 : "nvram"
[ 1.000000] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 1.008000] TCP: cubic registered
[ 1.012000] NET: Registered protocol family 17
[ 1.020000] Bridge firewalling registered
[ 1.024000] 8021q: 802.1Q VLAN Support v1.8
[ 1.044000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 1.052000] Freeing unused kernel memory: 204K (8030d000 - 80340000)
procd: Console is alive
procd: - watchdog -
[ 3.796000] pps_core: LinuxPPS API ver. 1 registered
[ 3.800000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@…>
[ 3.816000] PTP clock support registered
[ 4.000000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 4.024000] libphy: b44_eth_mii: probed
[ 4.028000] Found board: "Asus WL500GP V1"
[ 4.108000] b53_common: found switch: BCM5325, rev 0
[ 4.112000] b44 ssb0:0 (unregistered net_device): attached PHY driver [Broadcom B53 (1)] (mii_bus:phy_ad
dr=1:1e)
[ 4.124000] b44 ssb0:0 eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:1b:fc:45:35:d7

}}}

Attachments (0)

Change History (8)

comment:1 Changed 4 years ago by anonymous

same result continuesly reboot loop

comment:2 Changed 4 years ago by Zajec

I guess GPIO triggered by b53 that is supposed to reset the switch appears to be router reset GPIO.

comment:3 Changed 4 years ago by Zajec

Can you attach your NVRAM?

comment:4 Changed 4 years ago by hauke

  • Owner changed from developers to hauke
  • Status changed from new to accepted

comment:5 follow-up: Changed 4 years ago by hauke

I am able to reproduce the problem and I am working on a clean fix, on the second Ethernet controller is no phy at all, we have to skip it.

comment:6 in reply to: ↑ 5 Changed 4 years ago by Zajec

Replying to hauke:

I am able to reproduce the problem and I am working on a clean fix, on the second Ethernet controller is no phy at all, we have to skip it.

Does this device have 2 ssb ethernet cores, only 1 active & working? Could you attach booting log with debugging enabled, please? (So I can see ssb printing cores).

comment:7 Changed 4 years ago by hauke

  • Resolution set to fixed
  • Status changed from accepted to closed

Thank you for reporting this issue, This was fixed in r38306.

comment:8 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.