Modify

Opened 4 years ago

#14121 new defect

ethX non working on RB133C

Reported by: francesco@… Owned by: developers
Priority: normal Milestone: Attitude Adjustment 12.09.1
Component: base system Version: Trunk
Keywords: Cc:

Description

Hi,
I compiled Openwrt 12.09 from git for the Routerboard 133C.
I set Infineon ADM5120, rb1xx as target.

The problem is, when the ADM5120 built-in ethernet switch driver get loaded, the leds on the ethernet port turn off and you can't get connectivity through the port.

Even using

admswconfig eth0 0c
ifconfig eth0 down
ifconfig eth0 up

...I can't get any connectivity. Moreover, I get 6 ethernet devices (eth0, eth1, eth2, eth3, eth4, eth5) while my board has only one.

The board (and ethernet connectivity) is working with Kamikaze image (netboot image).

Attachments (1)

boot-serial.txt (8.2 KB) - added by francesco@… 4 years ago.
Board output via serial during boot

Download all attachments as: .zip

Change History (1)

Changed 4 years ago by francesco@…

Board output via serial during boot

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.