Opened 5 years ago

Closed 5 years ago

Last modified 5 years ago

#13816 closed defect (invalid)

WAN shows always down in RsPro

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: Cc:


Here is the output from my RouterStation Pro:

# swconfig dev switch0 show | grep link

link: port:0 link:up speed:1000baseT full-duplex txflow rxflow
link: port:1 link:down
link: port:2 link:down
link: port:3 link:down
link: port:4 link:up speed:1000baseT full-duplex auto

Port 0 is a CPU link and shows alway 1000baseT
Ports 2-4 LAN ports (4->LAN1, 3->LAN2, 2->LAN1)
Port 1 is a WAN port. And it doesnt matter if the cable is connected or not, it always shows link:down.

Attachments (0)

Change History (3)

comment:1 Changed 5 years ago by blogic

  • Resolution set to invalid
  • Status changed from new to closed

on the rspro, the wan port is a seperate network device running on its own interface. wan is not connected via the switch

comment:2 Changed 5 years ago by anonymous

How can i check WAN connection then on such routers?

comment:3 Changed 5 years ago by jow

"devstatus eth0" or via ethtool

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.