Opened 5 years ago

Closed 5 years ago

Last modified 4 years ago

#13683 closed defect (no_response)

AR7xxx && AR9xxx : board(db120) getting restarted when usb is connected

Reported by: srinivas.neeli1244@… Owned by: developers
Priority: highest Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:


OpenWrt Image Attitude Adjustment 12.09 is flashed on db120 target board with Target system AR7xxx && AR9xxx.Able to bring up the board in AP mode.But once any usb device either USB Mass storage or USB 3G dongle is connected to the USB port on the board,board is getting restarted/getting hung and not able to proceed for further booting.

Any information provided will be appreciated.

Attachments (0)

Change History (3)

comment:1 Changed 5 years ago by nbd

are you sure you're supplying enough power to the board?
have you tried using a powered hub to connect your devices?

comment:2 Changed 5 years ago by nbd

  • Resolution set to no_response
  • Status changed from new to closed

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.