Opened 5 years ago

Closed 5 years ago

#13396 closed defect (worksforme)

ASUS RT-N16 support

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: packages Version: Trunk
Keywords: ASUS RT-N16, ASUS, RT-N16 Cc:


At revision 36373.

built latest kernel, CFE doesn't like the image :

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: �T 5뤤� 27 16:47:24 CST 2009 (root@…)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller
CPU type 0x19740: 480MHz
Tot mem: 131072 KBytes

CFE mem: 0x80700000 - 0x8079B310 (635664)
Data: 0x80731B30 - 0x80734880 (11600)
BSS: 0x80734880 - 0x80735310 (2704)
Heap: 0x80735310 - 0x80799310 (409600)
Stack: 0x80799310 - 0x8079B310 (8192)
Text: 0x80700000 - 0x80731B30 (203568)

Device eth0: hwaddr 48-5B-39-41-21-86, ipaddr, mask

gateway not set, nameserver not set

Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)

Attachments (0)

Change History (5)

comment:1 Changed 5 years ago by anonymous

flashed with openwrt-brcm47xx-squashfs.trx over tftp.

comment:2 Changed 5 years ago by hauke

  • Resolution set to worksforme
  • Status changed from new to closed

I can not reproduce this on my devices. Reopen if this problem still exists.

comment:3 Changed 5 years ago by theorem

  • Resolution worksforme deleted
  • Status changed from closed to reopened

I've tried again with the latest release recompiled, applied the same .trx file -- same results. Are you available on IRC to assist live ?

comment:4 Changed 5 years ago by theorem

found the issue. Remember boys and girls to use 'mode binary' when you push your firmware to the router ...


works fine. Please close.

comment:5 Changed 5 years ago by jow

  • Resolution set to worksforme
  • Status changed from reopened to closed

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.