Modify

Opened 5 years ago

Last modified 5 years ago

#13369 reopened defect

uci not commiting ( ? )

Reported by: anonymous Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: packages Version: Trunk
Keywords: Cc:

Description

Model TP-Link TL-WR740N/ND v4
Firmware Version OpenWrt Barrier Breaker r36195 /LuCI Trunk (svn-r9807)

I changed WAN config from 'pppoe' to 'static address'.
All configured from LUCI

Now I see in LUCI

Network

	
		IPv4 WAN Status
			
				
eth1
				Type: static
Address: 62.80.191.146
Netmask: 255.255.255.252
Gateway: 62.80.191.145
DNS 1: 62.80.160.130
DNS 2: 8.8.8.8
Connected: 0h 21m 19s

			
		
		
		Active Connections8 / 16384 (0%)

But in real :

root@OpenWrt:~# uci show network
network.loopback=interface
network.loopback.ifname=lo
network.loopback.proto=static
network.loopback.ipaddr=127.0.0.1
network.loopback.netmask=255.0.0.0
network.lan=interface
network.lan._orig_ifname=eth0 radio0.network1
network.lan._orig_bridge=true
network.lan.type=bridge
network.lan.proto=static
network.lan.ipaddr=192.168.1.1
network.lan.netmask=255.255.255.0
network.lan.ifname=eth0
network.wan=interface
network.wan._orig_ifname=eth1
network.wan._orig_bridge=false
network.wan.ifname=eth1
network.wan.proto=static
network.wan.ipaddr=62.80.191.146
network.wan.netmask=255.255.255.252
network.wan.gateway=62.80.191.145
network.wan.broadcast=62.80.191.147
network.wan.dns=62.80.160.130 8.8.8.8
network.@switch[0]=switch
network.@switch[0].name=switch0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=switch0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0 1 2 3 4
root@OpenWrt:~# uci commit
root@OpenWrt:~# uci commit network
root@OpenWrt:~# ip l l eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000

link/ether a0:f3:c1:f7:52:b7 brd ff:ff:ff:ff:ff:ff

root@OpenWrt:~# ip add l eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether a0:f3:c1:f7:52:b7 brd ff:ff:ff:ff:ff:ff

root@OpenWrt:~# ip r
192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1
root@OpenWrt:~#

Attachments (0)

Change History (2)

comment:1 Changed 5 years ago by jow

  • Resolution set to worksforme
  • Status changed from new to closed

I don't see anything wrong here.

comment:2 Changed 5 years ago by anonymous

  • Resolution worksforme deleted
  • Status changed from closed to reopened

Look at routing table please.
There is no address on WAN (eth1) interface, and no routes .

It's not configured at all !

Add Comment

Modify Ticket

Action
as reopened .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.