Modify

Opened 5 years ago

Closed 5 years ago

#12937 closed enhancement (invalid)

Add support for Tenda W150M

Reported by: Chi Zhang <zhangchi866@…> Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: port, mips, ralink Cc:

Description

First I would like to point out that 3G300M, 3G150M, W300M, W150M and W150M+ use one same board, except that 3G models have USB sockets populated, and there are a few differences in LED labeling between 3G models and W models.
All of the above models can have either SPI or parallel NOR flash.
Most W300M / W150M / W150M+ come with 2MB flash, so it is tricky to squeeze OpenWRT into them, but some W150M ordered by HP have 4MB flash.

Finally I have wrote a patch which will let OpenWRT run on my HP version Tenda W150M (which have 4MB parallel NOR flash).
NOTE: I did not add USB init code in the patch and the LED defination is slightly different from 3G models so it is not suitable for 3G models with parallel flash. One more patch is needed if these models are going to be supported.

Attachments (1)

git-w150m.diff (8.0 KB) - added by Chi Zhang <zhangchi866@…> 5 years ago.
the patch

Download all attachments as: .zip

Change History (2)

Changed 5 years ago by Chi Zhang <zhangchi866@…>

the patch

comment:1 Changed 5 years ago by jogo

  • Resolution set to invalid
  • Status changed from new to closed

Please submit the patch to the mailing list according to SubmittingPatches. I'll close this ticket to keep trac mostly for actual bugs.

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.