Modify

Opened 5 years ago

Closed 5 years ago

#12928 closed defect (no_response)

3.7.5 kernel fails to start

Reported by: fclql@… Owned by: developers
Priority: highest Milestone: Chaos Calmer 15.05
Component: kernel Version: Trunk
Keywords: if (!run_init_process("/etc/preinit")) Cc:

Description

[ 0.450000] number of CFI chips: 1
[ 0.460000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 0.470000] Creating 6 MTD partitions on "physmap-flash.0":
[ 0.480000] 0x000000000000-0x000000020000 : "u-boot"
[ 0.490000] 0x000000020000-0x000000120000 : "kernel"
[ 0.510000] 0x000000120000-0x0000007e0000 : "rootfs"
[ 0.520000] mtd: partition "rootfs" set to be root filesystem
[ 0.530000] mtd: partition "rootfs_data" created automatically, ofs=720000, len=C0000 
[ 0.550000] 0x000000720000-0x0000007e0000 : "rootfs_data"
[ 0.560000] 0x0000007e0000-0x000000800000 : "factory"
[ 0.570000] 0x000000020000-0x0000007e0000 : "firmware"
[ 0.590000] 0x000000000000-0x000000800000 : "fullflash"
[ 0.600000] Setting up RTL8211CL PHY...done.
[ 0.620000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 0.630000] TCP: cubic registered
[ 0.640000] NET: Registered protocol family 17
[ 0.650000] 8021q: 802.1Q VLAN Support v1.8
[ 0.670000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 0.680000] Freeing unused kernel memory: 220k freed
[ 1.020000] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

Attachments (0)

Change History (3)

comment:1 Changed 5 years ago by fclql@…

Erased 113 sectors
update default: main system...

 Copy linux image[7340036 byte] to Flash[0xBF020000].... 
Copy to Flash... 
 Copy 7340036 byte to Flash... 
 addr = 0xBF07409C ,cnt=6995816 
 addr = 0xBF0C813A ,cnt=6651594 
 addr = 0xBF11C1D8 ,cnt=6307372 
 addr = 0xBF170276 ,cnt=5963150 
 addr = 0xBF1C4314 ,cnt=5618928 
 addr = 0xBF2183B2 ,cnt=5274706 
 addr = 0xBF26C450 ,cnt=4930484 
 addr = 0xBF2C04EE ,cnt=4586262 
 addr = 0xBF31458C ,cnt=4242040 
 addr = 0xBF36862A ,cnt=3897818 
 addr = 0xBF3BC6C8 ,cnt=3553596 
 addr = 0xBF410766 ,cnt=3209374 
 addr = 0xBF464804 ,cnt=2865152 
 addr = 0xBF4B88A2 ,cnt=2520930 
 addr = 0xBF50C940 ,cnt=2176708 
 addr = 0xBF5609DE ,cnt=1832486 
 addr = 0xBF5B4A7C ,cnt=1488264 
 addr = 0xBF608B1A ,cnt=1144042 
 addr = 0xBF65CBB8 ,cnt=799820 
 addr = 0xBF6B0C56 ,cnt=455598 
 addr = 0xBF704CF4 ,cnt=111376 done
## Booting image at bf020000 ...
   Image Name:   MIPS OpenWrt Linux-3.7.5
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    923130 Bytes = 901.5 kB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
  IH_COMP_LZMA Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.7.5 (openwrt@204) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #5 Fri Feb 1 15:53:46 MSK 2013
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:3 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=HG256 console=ttyS1,57600 mtdparts=physmap-flash.0:128k(u-boot)ro,1024k(kernel),6912k(rootfs),128k@0x7e0000(factory),7936k@0x20000(firmware),8192k@0x00000(fullflash) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=00030c44
[    0.000000] Readback ErrCtl register=00030c44
[    0.000000] Memory: 29568k/32768k available (1988k kernel code, 3200k reserved, 478k data, 220k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is HuaWei HG256
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.310000] msgmni has been set to 57
[    0.320000] io scheduler noop registered
[    0.330000] io scheduler deadline registered (default)
[    0.340000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.350000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    0.360000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    0.380000] physmap platform flash device: 01000000 at bf000000
[    0.390000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0022c9
[    0.410000] Amd/Fujitsu Extended Query Table at 0x0040
[    0.430000]   Amd/Fujitsu Extended Query version 1.1.
[    0.440000] physmap-flash.0: Swapping erase regions for top-boot CFI table.
[    0.450000] number of CFI chips: 1
[    0.460000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    0.470000] Creating 6 MTD partitions on "physmap-flash.0":
[    0.480000] 0x000000000000-0x000000020000 : "u-boot"
[    0.490000] 0x000000020000-0x000000120000 : "kernel"
[    0.510000] 0x000000120000-0x0000007e0000 : "rootfs"
[    0.520000] mtd: partition "rootfs" set to be root filesystem
[    0.530000] mtd: partition "rootfs_data" created automatically, ofs=720000, len=C0000 
[    0.550000] 0x000000720000-0x0000007e0000 : "rootfs_data"
[    0.560000] 0x0000007e0000-0x000000800000 : "factory"
[    0.570000] 0x000000020000-0x0000007e0000 : "firmware"
[    0.590000] 0x000000000000-0x000000800000 : "fullflash"
[    0.600000] Setting up RTL8211CL PHY...done.
[    0.620000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    0.630000] TCP: cubic registered
[    0.640000] NET: Registered protocol family 17
[    0.650000] 8021q: 802.1Q VLAN Support v1.8
[    0.670000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    0.680000] Freeing unused kernel memory: 220k freed
[    1.020000] Kernel panic - not syncing: No init found.  Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.

comment:2 Changed 5 years ago by nbd

tried a recent snapshot build?

comment:3 Changed 5 years ago by nbd

  • Resolution set to no_response
  • Status changed from new to closed

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.