Modify

Opened 5 years ago

#12842 new defect

Failed to autostart wifi after boot on a tp-link wr703n

Reported by: dani@… Owned by: developers
Priority: normal Milestone: Chaos Calmer 15.05
Component: base system Version: Trunk
Keywords: wireless, tp-link, wr703n Cc:

Description

hello,
my wifi fails to auto start after boot on a tp-link wr703n with r35214 and the following config:

config wifi-device radio0

option type mac80211
option channel 11
option hwmode 11ng
option path 'platform/ar933x_wmac'
option htmode HT20
list ht_capab SHORT-GI-20
list ht_capab SHORT-GI-40
list ht_capab RX-STBC1
list ht_capab DSSS_CCK-40
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 0

config wifi-iface

option device radio0
option network lan
option mode ap
option ssid wr703n
option encryption none

logread says:

Jan 1 00:00:18 webcam kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 00:00:18 webcam kern.info kernel: device eth0 entered promiscuous mode
Jan 1 00:00:18 webcam daemon.notice netifd: Interface 'lan' is now up
Jan 1 00:00:18 webcam kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Jan 1 00:00:18 webcam daemon.notice netifd: Interface 'loopback' is now up
Jan 1 00:00:18 webcam kern.info kernel: IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 1 00:00:18 webcam user.info sysinit: Configuration file: /var/run/hostapd-phy0.conf
Jan 1 00:00:18 webcam user.info sysinit: nl80211: Failed to add interface wlan0 into bridge eth0: Operation not supported
Jan 1 00:00:18 webcam user.info sysinit: nl80211 driver initialization failed.
Jan 1 00:00:18 webcam user.info sysinit: Failed to start hostapd for phy0
Jan 1 00:00:19 webcam kern.info kernel: eth0: link up (100Mbps/Full duplex)
Jan 1 00:00:19 webcam kern.info kernel: br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:19 webcam kern.info kernel: br-lan: port 1(eth0) entered forwarding state
Jan 1 00:00:19 webcam kern.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 1 00:00:19 webcam kern.info kernel: IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

Attachments (0)

Change History (0)

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.