Opened 5 years ago
Closed 5 years ago
#12511 closed defect (worksforme)
Does not work the command "detect wifi".
Reported by: | anonymous | Owned by: | developers |
---|---|---|---|
Priority: | normal | Milestone: | Chaos Calmer 15.05 |
Component: | base system | Version: | Trunk |
Keywords: | wifi detect | Cc: |
Description
A file created by the command "wifi detect > /etc/config/wireless" has the size of the 0 bytes.
BARRIER BREAKER (Bleeding Edge, r34253)
Attachments (0)
Change History (5)
comment:1 Changed 5 years ago by Lukas. G.
comment:2 Changed 5 years ago by anonymous
TL-WDR4300 v1.3
comment:3 Changed 5 years ago by anonymous
TL-WDR4300 v1.3
[ 29.690000] ieee80211 phy0: Atheros AR9340 Rev:0 mem=0xb8100000, irq=47
[ 29.710000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
comment:4 Changed 5 years ago by anonymous
It is strange if the chipset is not supported, because the wifi works quite stable except /ticket/12510.html.
According to the Support Device, the TL-WDR4300 v1.3 works with r34122.
BARRIER BREAKER (Bleeding Edge, r34253) on TL-WDR4300 v1.3
Wireless:
[29.690000] ieee80211 phy0: Atheros AR9340 Rev: 0 mem = 0xb8100000, irq = 47
[29.710000] ieee80211 phy1: Atheros AR9300 Rev: 4 mem = 0xB0000000, irq = 40
comment:5 Changed 5 years ago by nbd
- Resolution set to worksforme
- Status changed from new to closed
we had some bad snapshot builds occasionally, but things should be working now.
Your chipset might not be supported. (Which, if I recall correctly, results in an empty response) What device are you working with?