Modify

Opened 6 years ago

Closed 5 years ago

Last modified 4 years ago

#11207 closed defect (not_a_bug)

LuCi web interface does not show IPV6 address on WAN

Reported by: johnnyusa2k3@… Owned by:
Priority: normal Milestone: Barrier Breaker 14.07
Component: luci Version: Trunk
Keywords: Cc:

Description

Even if i reboot the router, the IPV6 status of the WAN interface doesn't change. It is shown as below:

IPv6 WAN Status	

pppoe-wan	Address: ::
                Gateway: FE80:0:0:0:0:0:0:1
                Connected: 0h 32m 7s

But if i ssh into router and ifconfig the ppoe-wan, i gen an ipv6 addrss, as shown below:

root@AiSS:~# ifconfig pppoe-wan
pppoe-wan Link encap:Point-to-Point Protocol
          inet addr:79.118.254.13  P-t-P:10.0.0.1  Mask:255.255.255.255
          inet6 addr: fe80::4f76:fe0d/10 Scope:Link
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:17524 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10444 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:14918902 (14.2 MiB)  TX bytes:1283728 (1.2 MiB)

root@AiSS:~#

I dunno why the LuCi interface doesnt assign IPv6 entry to the PPPoE-WAN. IPv6 works on the router and the connected computers. But i want to fix the LuCi web interface not showing IPv6 connectivity on PPOe-WAN.

This happens with latest trunk build:

Firmware Version	 OpenWrt Firmware Attitude Adjustment (r31158) / LuCI Trunk (trunk+svn8382)

Attachments (0)

Change History (4)

comment:1 follow-up: Changed 6 years ago by jow

LuCI does not assign anything, it just filters FE80::/10 subnets from the iface status as they're usually not interesting, not sure how to proceed here.

comment:2 in reply to: ↑ 1 Changed 6 years ago by johnnyusa2k3@…

Replying to jow:

LuCI does not assign anything, it just filters FE80::/10 subnets from the iface status as they're usually not interesting, not sure how to proceed here.

Thanks for your answer. It's not critical, i was just wondering why it happens. You can close this ticket.

comment:3 Changed 5 years ago by nbd

  • Resolution set to not_a_bug
  • Status changed from new to closed

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.