Opened 6 years ago

Last modified 4 years ago

#11094 new defect

broadcom-wl: Add 40MHz HT mode and side channel spec to wlc and uci

Reported by: Tobias Wolf <towolf@…> Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: Cc:


Fixing 10918 made N-mode work on BCM4329 N_PHY without HT40.

To enable 40MHz channels and to unlock higher rates, enhancing the wlc tool with the respective subcommands and exposing them via uci would make sense.

The wl tool can configure the relevant settings using, e.g.,

wl chanspec -b 2 -c 4 -w 40 -s -1

Rates up to 300 MBit/s have been reported using these settings on an Asus WL-500W here:

Attachments (0)

Change History (2)

comment:1 Changed 4 years ago by anonymous

this is not really a defect. Please close this.

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as new .

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.