Modify

Opened 6 years ago

Closed 6 years ago

Last modified 4 years ago

#11021 closed defect (fixed)

Buffalo WZR-HP-G301NH (rtl8366rb) support broken in backfire

Reported by: igor Owned by: developers
Priority: response-needed Milestone: Chaos Calmer 15.05
Component: kernel Version: 10.03.1
Keywords: Cc:

Description

Fresh build backfire r30646:

Starting kernel ...

Linux version 2.6.32.27 (igor@StarWolf) (gcc version 4.3.3 (GCC) ) #1 Thu Feb 23 11:50:19 EET 2012
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=WZR-HP-G300NH
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61776k/65536k available (2062k kernel code, 3692k reserved, 412k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is Buffalo WZR-HP-G300NH
Found an RTL8366RB switch
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Feb 23 2012 11:48:43 Installing. 
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
ar91xx-flash ar91xx-flash: 02000000 at 1e000000
ar91xx-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 CFI mfr 0x00000001
 CFI id  0x00002201
 Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
ar91xx-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
ar91xx-flash ar91xx-flash: using static partition mapping
Creating 7 MTD partitions on "ar91xx-flash":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000060000 : "u-boot-env"
0x000000060000-0x000000160000 : "kernel"
0x000000160000-0x000001fc0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=300000, len=1CC0000 
0x000000300000-0x000001fc0000 : "rootfs_data"
0x000001fc0000-0x000001fe0000 : "user_property"
0x000001fe0000-0x000002000000 : "art"
0x000000060000-0x000001fc0000 : "firmware"
Atheros AR71xx SPI Controller driver version 0.2.4
Realtek RTL8366S ethernet switch driver version 0.2.2
rtl8366s rtl8366s: using GPIO pins 19 (SDA) and 20 (SCK)
rtl8366s rtl8366s: unknown chip id (0000)
rtl8366s rtl8366s: chip detection failed, err=-19
eth0: Atheros AG71xx at 0xb9000000, irq 4
CPU 0 Unable to handle kernel paging request at virtual address 0000000c, epc == 802622d0, ra == 801a56c0
Oops[#1]:
Cpu 0
$ 0   : 00000000 0000006e 00000000 00000000
$ 4   : 83819d40 83819d40 00000000 03913000
$ 8   : 0000000a 00000000 00000400 802fcc5c
$12   : 000000cd 00000004 83902488 b9000000
$16   : 83819d40 00000000 801d42c8 83819d40
$20   : 00000200 00000000 802b4280 802b4278
$24   : 00000003 801a152c
$28   : 83818000 83819d08 00000000 801a56c0
Hi    : 00000079
Lo    : 037e0000
epc   : 802622d0 0x802622d0
    Not tainted
ra    : 801a56c0 0x801a56c0
Status: 1000d003    KERNEL EXL IE
Cause : 80800008
BadVA : 0000000c
PrId  : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=83818000, task=83814000, tls=00000000)
Stack : 00000400 802fcc5c 000000cd 00000004 83902488 83819d40 83819d40 801d42c8
        802946f4 801a56c0 00000200 00000000 802b4280 802b4278 00000000 00000000
        00000200 ffffffff 802baa88 83813ec0 802b4238 80067db4 1000d003 00000079
        037e0000 83819d90 50808000 80178fe8 1000d003 ffffffff 83813c00 83813ec0
        ffffffff 80067a50 00000000 83813c00 b9000000 00000004 83813c00 83813c00
        ...
Call Trace:[<801d42c8>] 0x801d42c8
[<801a56c0>] 0x801a56c0
[<80067db4>] 0x80067db4
[<80178fe8>] 0x80178fe8
[<80067a50>] 0x80067a50
[<801a8b2c>] 0x801a8b2c
[<80172274>] 0x80172274
[<801a8c70>] 0x801a8c70
[<80172950>] 0x80172950
[<801a8c04>] 0x801a8c04
[<801a8278>] 0x801a8278
[<801729e0>] 0x801729e0
[<801a79fc>] 0x801a79fc
[<801a9024>] 0x801a9024
[<802dd8c8>] 0x802dd8c8
[<801a9024>] 0x801a9024
[<801c84b8>] 0x801c84b8
[<802dd8c8>] 0x802dd8c8
[<802dd8f0>] 0x802dd8f0
[<802dd6e4>] 0x802dd6e4
[<8006b698>] 0x8006b698
[<800abf70>] 0x800abf70
[<802dcdcc>] 0x802dcdcc
[<802cb33c>] 0x802cb33c
[<8025d924>] 0x8025d924
[<8006da10>] 0x8006da10
[<802cb26c>] 0x802cb26c
[<8006da00>] 0x8006da00


Code: 8c820000  8c910004  00809821 <12200009> 8c52000c  8e220004  3c058026  24a5244c  2624000c
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!

Attachments (0)

Change History (9)

comment:1 Changed 6 years ago by nbd

  • Priority changed from high to response-needed

Please enable CONFIG_KERNEL_KALLSYMS in menuconfig and compile again, then post an updated crash log.

comment:2 Changed 6 years ago by igor

Done:

Starting kernel ...

Linux version 2.6.32.27 (igor@StarWolf) (gcc version 4.3.3 (GCC) ) #1 Fri Feb 24 19:34:50 EET 2012
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=WZR-HP-G300NH
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61624k/65536k available (2071k kernel code, 3844k reserved, 555k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is Buffalo WZR-HP-G300NH
Found an RTL8366RB switch
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Feb 24 2012 19:33:15 Installing. 
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
ar91xx-flash ar91xx-flash: 02000000 at 1e000000
ar91xx-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 CFI mfr 0x00000001
 CFI id  0x00002201
 Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
ar91xx-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
ar91xx-flash ar91xx-flash: using static partition mapping
Creating 7 MTD partitions on "ar91xx-flash":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000060000 : "u-boot-env"
0x000000060000-0x000000160000 : "kernel"
0x000000160000-0x000001fc0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=300000, len=1CC0000
0x000000300000-0x000001fc0000 : "rootfs_data"
0x000001fc0000-0x000001fe0000 : "user_property"
0x000001fe0000-0x000002000000 : "art"
0x000000060000-0x000001fc0000 : "firmware"
Atheros AR71xx SPI Controller driver version 0.2.4
Realtek RTL8366S ethernet switch driver version 0.2.2
rtl8366s rtl8366s: using GPIO pins 19 (SDA) and 20 (SCK)
rtl8366s rtl8366s: unknown chip id (0000)
rtl8366s rtl8366s: chip detection failed, err=-19
eth0: Atheros AG71xx at 0xb9000000, irq 4
CPU 0 Unable to handle kernel paging request at virtual address 0000000c, epc == 80264710, ra == 801a7afc
Oops[#1]:
Cpu 0
$ 0   : 00000000 0000006e 00000000 00000000
$ 4   : 83819d40 83819d40 00000000 03913000
$ 8   : 0000000a 00000000 00000001 0000000a
$12   : 000000cd 00000004 83902488 b9000000
$16   : 83819d40 00000000 801d6704 83819d40
$20   : 00000200 00000000 802da280 802da278
$24   : 00000003 801a3918
$28   : 83818000 83819d08 00000000 801a7afc
Hi    : 00000079
Lo    : 037e0000
epc   : 80264710 klist_next+0x24/0xc4
    Not tainted
ra    : 801a7afc device_find_child+0x68/0xac
Status: 1000d003    KERNEL EXL IE
Cause : 80800008
BadVA : 0000000c
PrId  : 00019374 (MIPS 24Kc)
Modules linked in:
Process swapper (pid: 1, threadinfo=83818000, task=83814000, tls=00000000)
Stack : 00000001 0000000a 000000cd 00000004 83902488 83819d40 83819d40 801d6704
        802bac5c 801a7afc 00000200 00000000 802da280 802da278 00000000 00000000
        00000200 ffffffff 802e0a88 83813ec0 802da238 80067db4 1000d003 00000079
        037e0000 83819d90 50808000 8017b3d0 1000d003 ffffffff 83813c00 83813ec0
        ffffffff 80067a50 00000000 83813c00 b9000000 00000004 83813c00 83813c00
        ...
Call Trace:
[<80264710>] klist_next+0x24/0xc4
[<801a7afc>] device_find_child+0x68/0xac
[<80067db4>] ag71xx_phy_connect+0x2d0/0x2d8
[<80067a50>] ag71xx_probe+0x488/0x51c
[<801aaf68>] driver_probe_device+0xb8/0x190
[<801ab0ac>] __driver_attach+0x6c/0xa4
[<801aa6b4>] bus_for_each_dev+0x60/0xb0
[<801a9e38>] bus_add_driver+0xc4/0x25c
[<801ab460>] driver_register+0xe0/0x198
[<80303890>] ag71xx_module_init+0x28/0x4c
[<8006b680>] do_one_initcall+0x68/0x1ec
[<802f133c>] kernel_init+0xd0/0x13c
[<8006dcf8>] kernel_thread_helper+0x10/0x18


Code: 8c820000  8c910004  00809821 <12200009> 8c52000c  8e220004  3c058026  24a5488c  2624000c
Disabling lock debugging due to kernel taint
Kernel panic - not syncing: Attempted to kill init!

comment:3 Changed 6 years ago by igor

I found a small mistake in r27785. Please commit this patch to backfire:

Index: target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c
===================================================================
--- target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c	(revision 30708)
+++ target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c	(working copy)
@@ -270,8 +270,12 @@
 
 	platform_device_register(&wzrhpg300nh_74hc153_device);
 	platform_device_register(&wzrhpg300nh_flash_device);
-	platform_device_register(&wzrhpg300nh_rtl8366s_device);
 
+	if (hasrtl8366rb)
+		platform_device_register(&wzrhpg300nh_rtl8366rb_device);
+	else
+		platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
 				    wzrhpg300nh_leds_gpio);
 

comment:4 Changed 6 years ago by nbd

  • Resolution set to fixed
  • Status changed from new to closed

added in r30724, thanks

comment:5 Changed 6 years ago by igor

  • Resolution fixed deleted
  • Status changed from closed to reopened

Unfortunately, it wasn't the only one problem. Now correct switch driver loads and works, no more crash, but eth1 couldn't connect to PHY:

# dmesg 
Linux version 2.6.32.27 (igor@StarWolf) (gcc version 4.3.3 (GCC) ) #1 Sun Feb 26 16:08:50 EET 2012
prom: fw_arg0=00000007, fw_arg1=a3f57fb0, fw_arg2=a3f58480, fw_arg3=00000020
MyLoader: sysp=00000000, boardp=00000000, parts=00000000
bootconsole [early0] enabled
CPU revision is: 00019374 (MIPS 24Kc)
Atheros AR9132 rev 2, CPU:400.000 MHz, AHB:200.000 MHz, DDR:400.000 MHz
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat 802ca1a0, node_mem_map 81000000
  Normal zone: 128 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 board=WZR-HP-G300NH
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
Writing ErrCtl register=00000000
Readback ErrCtl register=00000000
Memory: 61776k/65536k available (2062k kernel code, 3692k reserved, 412k data, 152k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:56
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
MIPS: machine is Buffalo WZR-HP-G300NH
Found an RTL8366RB switch
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
yaffs Feb 26 2012 16:07:13 Installing. 
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
console [ttyS0] enabled, bootconsole disabled
ar91xx-flash ar91xx-flash: 02000000 at 1e000000
ar91xx-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 CFI mfr 0x00000001
 CFI id  0x00002201
 Amd/Fujitsu Extended Query Table at 0x0040
  Amd/Fujitsu Extended Query version 1.3.
ar91xx-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
ar91xx-flash ar91xx-flash: using static partition mapping
Creating 7 MTD partitions on "ar91xx-flash":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000060000 : "u-boot-env"
0x000000060000-0x000000160000 : "kernel"
0x000000160000-0x000001fc0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=300000, len=1CC0000 
0x000000300000-0x000001fc0000 : "rootfs_data"
0x000001fc0000-0x000001fe0000 : "user_property"
0x000001fe0000-0x000002000000 : "art"
0x000000060000-0x000001fc0000 : "firmware"
Atheros AR71xx SPI Controller driver version 0.2.4
Realtek RTL8366RB ethernet switch driver version 0.2.3
rtl8366rb rtl8366rb: using GPIO pins 19 (SDA) and 20 (SCK)
rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
rtl8366rb: probed
eth0: Atheros AG71xx at 0xb9000000, irq 4
eth0: using fixed link parameters
eth1: Atheros AG71xx at 0xba000000, irq 5
eth1: could not connect to PHY at rtl8366rb:04
ag71xx: probe of ag71xx.1 failed with error -22
Atheros AR71xx hardware watchdog driver version 0.1.0
ar71xx-wdt: timeout=15 secs (max=21)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 152k freed
Please be patient, while OpenWrt loads ...
input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
Button Hotplug driver version 0.3.1
ar71xx: pll_reg 0xb8050014: 0x1f000000
eth0: link up (1000Mbps/Full duplex)
Registered led device: wzr-hp-g300nh:orange:security
Registered led device: wzr-hp-g300nh:green:wireless
Registered led device: wzr-hp-g300nh:green:router
Registered led device: wzr-hp-g300nh:red:diag
Registered led device: wzr-hp-g300nh:blue:usb
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
eth0: link down
ar71xx: pll_reg 0xb8050014: 0x1f000000
eth0: link up (1000Mbps/Full duplex)
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering forwarding state
Compat-wireless backport release: compat-wireless-2011-11-29
Backport based on wireless-testing.git master-2011-12-01
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: World regulatory domain updated:
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 mem=0xb80c0000, irq=2
cfg80211: Calling CRDA for country: US
PPP generic driver version 2.4.2
cfg80211: Regulatory domain changed to country: US
cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ar71xx-ehci ar71xx-ehci: Atheros AR91xx built-in EHCI controller
ar71xx-ehci ar71xx-ehci: new USB bus registered, assigned bus number 1
ar71xx-ehci ar71xx-ehci: irq 3, io mem 0x1b000000
ar71xx-ehci ar71xx-ehci: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
nf_conntrack version 0.5.0 (968 buckets, 3872 max)
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
ar71xx-wdt: enabling watchdog timer

comment:6 follow-up: Changed 6 years ago by jogo

Can you try applying r26600 to backfire?

comment:7 in reply to: ↑ 6 Changed 6 years ago by igor

Replying to jogo:

Can you try applying r26600 to backfire?

Yes, it works. Thanks!

comment:8 Changed 6 years ago by nbd

  • Resolution set to fixed
  • Status changed from reopened to closed

committed in r30739

comment:9 Changed 4 years ago by jow

  • Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)

Milestone Backfire 10.03.2 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.