#10978 closed defect (fixed)
Can't use of serial port
| Reported by: | lembo25@… | Owned by: | florian |
|---|---|---|---|
| Priority: | normal | Milestone: | Barrier Breaker 14.07 |
| Component: | packages | Version: | Backfire 10.03.1 RC6 |
| Keywords: | Cc: |
Description
Hi, all
I have problem with flashing my zxdsl 531b router (same like Dynalink RTA1025W) with openWRT.
I want to use this router for cheap serial to ethernet converter...So when I flashed router with last stable version of openwrt ( http://downloads.openwrt.org/snapshots/ … fs-cfe.bin), during boot I had message "Turn off boot console early0" and after that I cannot find my /dev/ttyS0 device. I tried to use earlier version of openWRT (http://downloads.openwrt.org/backfire/1 … fs-cfe.bin ). With this I managed to see my device i even used setserial, but unfortunately this version is not stable (I mean, that CFE after restart lose his image.)
So I need some help how to use stable version and continue to use console to interact with router.
10x in advance.
Attachments (2)
Change History (6)
comment:1 Changed 6 years ago by florian
- Owner changed from developers to florian
- Status changed from new to accepted
Changed 6 years ago by lembo25@…
This is log with trunk version. Everything ok but can't interact with router via serial console
Changed 6 years ago by anonymous
This is log with version (backfire 10.03.1 rc6). I can see my console, after install download with luci package mtd-17 , make command mtd fixtrx linux and after restart....bricked router.
comment:2 Changed 6 years ago by lembo25@…
I can use trunk version, but for some reason during boot, console is turn off early and I cannot see these:
bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
178 console [ttyS0] enabled, bootconsole disabled
179 console [ttyS0] enabled, bootconsole disabled .
comment:3 Changed 6 years ago by florian
- Resolution set to fixed
- Status changed from accepted to closed
Fixed with r30819.
comment:4 Changed 4 years ago by jow
- Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07
Milestone Attitude Adjustment 12.09 deleted
Please attach the bootlog of the device to help diagnose this issue.