Modify

Opened 6 years ago

Closed 5 years ago

Last modified 4 years ago

#10909 closed defect (duplicate)

Wan port (0) doesn't work

Reported by: iceslice Owned by: juhosg
Priority: high Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: tp-link wr1043nd Cc: sergey.i.salishiv@…

Description

Router: tp-link wr1043nd v1
After update from stock 111122 and later wan port (port 0) is permanently disabled, making wan inoperable.

Following workaround worked for me:

uci set network.@switch_vlan[0].ports="2 3 4 5t"
uci set network.@switch_vlan[1].ports="1 5t"
reboot

Attachments (0)

Change History (4)

comment:1 Changed 6 years ago by jow

  • Owner changed from developers to juhosg
  • Status changed from new to assigned

comment:2 Changed 6 years ago by spac@…

The new bootloader included in recent stock firmware disables WAN port as soon as possible in order to prevent switch from working as unmanaged switch and therefore freely pass packets between LAN and WAN (see Ticket #6819). And then the stock firmware re-enables WAN port somehow (I guess it outputs 1 or 0 to certain GPIO pin which is connected to physical layer schematics of WAN port).

comment:3 Changed 5 years ago by juhosg

  • Resolution set to duplicate
  • Status changed from assigned to closed

See #11898.

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.