Modify

Opened 6 years ago

Closed 6 years ago

Last modified 4 years ago

#10901 closed defect (worksforme)

genext2fs fails with "not enough memory for filesystem"

Reported by: ecain@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: packages Version: Trunk
Keywords: Cc:

Description

Revision: 30162 target x86_generic.
no errors on compiling.
2 gigs working memory and 8 gigs free space.
Rebooted and tested this as root as well... same error.

/home/wrt/openwrt/trunk/staging_dir/host/bin/genext2fs -U -b 49152 -N 18000 -d /home/wrt/openwrt/trunk/build_dir/target-i386_uClibc-0.9.32/root-x86/ /home/wrt/openwrt/trunk/build_dir/linux-x86_generic/root.ext4
/home/wrt/openwrt/trunk/staging_dir/host/bin/genext2fs: not enough memory for filesystem
make[5]: *** [install] Error 1

Attachments (0)

Change History (4)

comment:1 in reply to: ↑ description Changed 6 years ago by ecain@…

I copied genext2fs-1.4.1.tar.gz from the dl folder to a local folder.
Untared and installed locally. Worked as advertised.

I copied the new executable to the toolchain and was able to complete my build without errors. My executable is 75923 bytes. The one inside the toolchain is 35645 bytes. Same source, different results...

comment:2 follow-up: Changed 6 years ago by jow

  • Resolution set to worksforme
  • Status changed from new to closed

Your configured filesystem limits are too low for the amount of packages you try to embed. Simply increase the number of inodes and the partition size in the image options menu in menuconfig.

comment:3 in reply to: ↑ 2 Changed 5 years ago by banglang.huang@…

Replying to jow:

Your configured filesystem limits are too low for the amount of packages you try to embed. Simply increase the number of inodes and the partition size in the image options menu in menuconfig.

Hi,may I ask you a question?
I meet the above issuse as well, and my harddisk is 250GB,
so, how can I modifiy the kernel size, rootfs size and maximum inodes number for my device so that it can take advantage of my hardware resource sufficiently ?

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.