Modify ↓
Opened 6 years ago
Last modified 4 years ago
#10882 new defect
Failsafe does not work at all in 10.03.1 (DIR-825)
Reported by: | jb-debbugs@… | Owned by: | developers |
---|---|---|---|
Priority: | normal | Milestone: | Chaos Calmer 15.05 |
Component: | base system | Version: | 10.03.1 |
Keywords: | Cc: |
Description
With 10.03.1 final on a DIR-825, entering failsafe by pressing the WDS key (pressing the reset key during triggers boot loader recovery), doesn't work.
Specifically:
- The device remains "bricked"
- ping 192.168.1.1 from 192.168.1.97 doesn't get a response
- telnet 192.168.1.1 doesn't work either.
Tested with both the ...-squashfs-factory.bin and ...-jffs2-backup-loader.bin.
In my case this left me with no option but to reflash through the bootloader after each failure, which is slow and bad for the flash chips.
Attachments (0)
Change History (1)
comment:1 Changed 4 years ago by jow
- Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)
Note: See
TracTickets for help on using
tickets.
Milestone Backfire 10.03.2 deleted