Modify

Opened 6 years ago

Closed 6 years ago

Last modified 4 years ago

#10877 closed defect (invalid)

broadcom-wl not detect BCM43222 [14e4:a8d6]

Reported by: bsmail_f1@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version: Trunk
Keywords: 43222 a8d6 Cc:

Description

root@OpenWrt:/# dmesg
..........
[    0.072000] registering PCI controller with io_map_base unset
[    0.080000] bio: create slab <bio-0> at 0
[    0.088000] pci 0000:00:01.0: [14e4:a8d6] type 0 class 0x000280
[    0.088000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff]
[    0.100000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
[    0.104000] pci 0000:00:01.0: BAR 0: set to [mem 0x30000000-0x30003fff] (PCI address [0x30000000-0x30003fff])
..........
[   16.560000] wl: module license 'unspecified' taints kernel.
[   16.564000] Disabling lock debugging due to kernel taint
[   16.696000] SSB/BCMA glue driver successfully attached
..........

root@OpenWrt:/# lspci -vnn
00:01.0 Network controller [0280]: Broadcom Corporation Device [14e4:a8d6]
        Subsystem: Broadcom Corporation Device [14e4:a8d6]
        Flags: fast devsel, IRQ 39
        Memory at 30000000 (32-bit, non-prefetchable) [disabled] [size=16K]

Attachments (0)

Change History (4)

comment:1 Changed 6 years ago by jow

  • Resolution set to wontfix
  • Status changed from new to closed

This radio should be covered by bcm80211 / bcmfmac / bcmsmac.

comment:2 Changed 6 years ago by bsmail_f1@…

  • Resolution wontfix deleted
  • Status changed from closed to reopened

bcm80211 not detect

.....
[   35.836000] Compat-wireless backport release: compat-wireless-2011-11-29
[   35.844000] Backport based on wireless-testing.git master-2011-12-01
[   36.076000] cfg80211: Calling CRDA to update world regulatory domain
[   36.960000] cfg80211: World regulatory domain updated:
[   36.964000] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   36.972000] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   36.984000] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   36.992000] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   37.000000] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   37.008000] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   38.172000] Button Hotplug driver version 0.4.1
[   38.664000] PPP generic driver version 2.4.2
[   39.296000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   39.728000] NET: Registered protocol family 24
[   40.124000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   41.328000] xt_time: kernel timezone is -0000
[   43.720000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (2)]
[   44.688000] eth1: link forced UP - 100/full - flow control off/off
[   45.104000] device eth1 entered promiscuous mode
[   45.240000] br-lan: port 1(eth1) entering forwarding state
[   45.248000] br-lan: port 1(eth1) entering forwarding state

How to get working this radio?

comment:3 Changed 6 years ago by jow

  • Resolution set to invalid
  • Status changed from reopened to closed

This ticket is about broadcom-wl, open a separate one for mac80211 support.

comment:4 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.