Opened 6 years ago

Closed 6 years ago

#10858 closed defect (invalid)

firmware upgrade doesn't work through Luci with 10.03.1 brcm47xx image

Reported by: fblistes+luci@… Owned by:
Priority: normal Milestone:
Component: luci Version: 10.03.1
Keywords: Cc:


Hi !

I've tested brcm47xx and bcrm-2.4's 10.03.1 images on a Linksys WRT54GL ; I have a problem with firmware upgrade with brcm47xx architecture in this new release : using Luci, when choosing a firmware image, cliking on the upgrade button doesn't work : I don't have the page about the downloaded image, with its MD5 sum, and a proceed button. Trying the same procedure on brcm-2.4 arch. works well. I've used the workaround of using sysupgrade from a ssh session.

Attachments (0)

Change History (2)

comment:1 Changed 6 years ago by phip

I am having this problem as well on a WRT54GL / brcm47xx. I suspect running out of memory to be the culprit. With a connection to Luci or a SSH session going, I only have about 2000K free. Since the first step to an update is uploading the firmware file to RAM and verifying it, I can't see how uploading a firmware file bigger than free mem could do anything but fail.

comment:2 Changed 6 years ago by hauke

  • Resolution set to invalid
  • Status changed from new to closed

Yes you need more free memory for sysupgrade.

Add Comment

Modify Ticket

as closed .
The resolution will be deleted. Next status will be 'reopened'.

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.