Modify

Opened 6 years ago

Last modified 4 years ago

#10855 new defect

Switch still broken on AG241v2-EU

Reported by: Marco d'Itri Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: kernel Version: 10.03.1
Keywords: Cc: md@…

Description

Looks like #5927 again, downgrading to kamikaze fixes the issue.

Attachments (0)

Change History (3)

comment:1 Changed 4 years ago by will.price94@…

I just tried 12.09 and found the the switch isn't working for me either. The MAC address is detected correctly still unlike in #7330. I'm getting a lot of errors after booting up. Currently I've got no telephone line plugged in as I'm trying to sort out the switch functionality with access via serial cable.

[   38.240000] device eth0 entered promiscuous mode
[   38.260000] br-lan: port 1(eth0) entered forwarding state
[   38.280000] br-lan: port 1(eth0) entered forwarding state
[   38.640000] device eth0.1 entered promiscuous mode
[   38.710000] device eth0.2 entered promiscuous mode
[   39.260000] br-lan: port 1(eth0) entered disabled state
[   72.690000] tn7atm_close: closing 0.0.38.5
[   72.700000] tn7sar_teardown_complete called for channel 0
[   72.720000] ChannelTeardown returned rc = 0
[  104.160000] tn7atm_close: closing 0.0.38.5
[  104.170000] tn7sar_teardown_complete called for channel 0
[  104.190000] ChannelTeardown returned rc = 0
[  135.630000] tn7atm_close: closing 0.0.38.5
[  135.650000] tn7sar_teardown_complete called for channel 0
[  135.660000] ChannelTeardown returned rc = 0
^[[Z[  167.050000] tn7atm_close: closing 0.0.38.5
[  167.060000] tn7sar_teardown_complete called for channel 0
[  167.080000] ChannelTeardown returned rc = 0
[  198.460000] tn7atm_close: closing 0.0.38.5
[  198.480000] tn7sar_teardown_complete called for channel 0
[  198.490000] ChannelTeardown returned rc = 0
[  229.890000] tn7atm_close: closing 0.0.38.5
[  229.900000] tn7sar_teardown_complete called for channel 0
[  229.920000] ChannelTeardown returned rc = 0
[  261.300000] tn7atm_close: closing 0.0.38.5
[  261.320000] tn7sar_teardown_complete called for channel 0
[  261.330000] ChannelTeardown returned rc = 0
[  292.770000] tn7atm_close: closing 0.0.38.5
[  292.790000] tn7sar_teardown_complete called for channel 0
[  292.800000] ChannelTeardown returned rc 
# /etc/config/network
config interface loopback
	option ifname	lo
	option proto	static
	option ipaddr	127.0.0.1
	option netmask	255.0.0.0

config interface lan
	option ifname	"eth0 eth1 eth0.1 eth0.2"
	option type	bridge
	option proto	static
	option ipaddr	192.168.0.1
	option netmask	255.255.255.0
	option nat	1

## Example for ATM bridging.
## Useful for PPPoE or IP over ATM. Will create 'nas${unit}'
#
# config atm-bridge
#	option unit 	0
#	option encaps	llc
#	option vpi  	8
#	option vci  	35
#	option payload	bridged # some ISPs need this set to 'routed'


config interface wan
##	PPPoE:
#	option ifname	nas0
#	option proto	pppoe

#	PPPoA:
	option ifname	atm0
	option proto	pppoa
	option encaps	vc
	option vpi  	0
	option vci  	38
	
#	Both:
	option username "####"
	option password	"####"

I can get an internet connection, and ping from inside the router .

comment:2 in reply to: ↑ description Changed 4 years ago by will.price94@…

I should also add that this is what route outputs:

root@OpenWrt:/# route 
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.0.0     *               255.255.255.0   U     0      0        0 br-lan

comment:3 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.