Modify

Opened 6 years ago

Last modified 4 years ago

#10781 new defect

Asus WL-600g WiFi-LED not used

Reported by: onny Owned by: developers
Priority: low Milestone: Chaos Calmer 15.05
Component: kernel Version: 10.03.1
Keywords: led, wifi, wl-600g, asus Cc: onny@…

Description

Hello,
I'm using Backfire 10.03.1, using this firmware: backfire/10.03.1/brcm63xx/openwrt-96348GW-generic-squashfs-cfe.bin. Unfortunately, after enableing WiFi on the Asus WL-600g doesn't turn the info-LED on. Here may be some interesting output (dmesg):

bcm63xx_enet bcm63xx_enet.0: attached PHY at address 1 [Broadcom BCM63XX (1)]
Compat-wireless backport release: compat-wireless-2011-11-08-1-g4ab9b62
Backport based on wireless-testing.git master-2011-11-15
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PL ]
b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state

Attachments (0)

Change History (1)

comment:1 Changed 4 years ago by jow

  • Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)

Milestone Backfire 10.03.2 deleted

Add Comment

Modify Ticket

Action
as new .
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.