Modify

Opened 6 years ago

Closed 6 years ago

Last modified 4 years ago

#10703 closed defect (invalid)

swconfig can't connect to ADM6996M on DSL-624T

Reported by: Giuse <dk_giuse89@…> Owned by: developers
Priority: high Milestone: Chaos Calmer 15.05
Component: kernel Version: 10.03.1
Keywords: swconfig can't connect to ADM6996M Cc:

Description

Backfire 10.03.1 on DSL-624T don't connect to switch.

root@DSL624T:~# dmesg | grep swconfig
root@DSL624T:~# dmesg | grep switch  
root@DSL624T:~# dmesg | grep ADM699
root@DSL624T:~# swconfig dev eth0 help
Failed to connect to the switch
root@DSL624T:~# ifconfig 
eth0      Link encap:Ethernet  HWaddr 00:1E:58:C2:00:00  
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:9695 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8141 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:991868 (968.6 KiB)  TX bytes:968070 (945.3 KiB)
          Interrupt:41 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8864 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8864 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:621824 (607.2 KiB)  TX bytes:621824 (607.2 KiB)

wlan0     Link encap:Ethernet  HWaddr 00:1E:58:48:E1:4B  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:80

my netework config:

root@DSL624T:~# cat /etc/config/network 

config 'interface' 'loopback'
    option 'ifname' 'lo'
    option 'proto' 'static'
    option 'ipaddr' '127.0.0.1'
    option 'netmask' '255.0.0.0'

config 'switch' 'eth0'
    option 'enable' '1'
    option 'enable_vlan' '1'
    option 'reset' '1'

config 'interface' 'lan'
    option 'proto' 'static'
    option 'ipaddr' '192.168.1.1'
    option 'netmask' '255.255.255.0'
    option 'nat' '1'
    option 'ifname' 'eth1'

Attachments (0)

Change History (5)

comment:1 Changed 6 years ago by jow

  • Resolution set to invalid
  • Status changed from new to closed

That chip is currently not supported by the swconfig framework

comment:2 Changed 6 years ago by GIUSEPPE TIPALDI <ciusss@…>

  • Resolution invalid deleted
  • Status changed from closed to reopened

Replying to jow:

That chip is currently not supported by the swconfig framework

Sorry men, this is a possible solutions? If not, why?

comment:3 Changed 6 years ago by jow

  • Resolution set to invalid
  • Status changed from reopened to closed

I don't see the quoted patch implementing swconfig glue. Also you reported a bug against not existing functionality. Open a separate feature request please.

comment:4 Changed 5 years ago by florian

Fixed with r26865.

comment:5 Changed 4 years ago by jow

  • Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)

Milestone Backfire 10.03.2 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.