Modify

Opened 6 years ago

Closed 5 years ago

Last modified 4 years ago

#10329 closed defect (fixed)

10.03.1-rc6 does not boot on [lantiq_danube][GIGASX76X]

Reported by: anonymous Owned by: blogic
Priority: high Milestone: Chaos Calmer 15.05
Component: base system Version:
Keywords: lantiq rc-6 sx763 Cc:

Description

U-Boot 2010.03 (Jul 25 2011 - 17:27:43)

Board: Danube/Twinpass/Vinax-VE V1.3, DDR Speed 166 MHz, CPU Speed 333 MHz
DRAM:  32 MB
Flash:  8 MB
Net:   lq_cpe_eth
Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at b0020000 ...
   Image Name:   MIPS OpenWrt Linux-2.6.32.33
   Created:      2011-10-30  20:24:35 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    898715 Bytes = 877.7 kB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.32.33 (jow@nd-build-02.linux-appliance.net) (gcc version 4.3.3 (GCC) ) #10 Sun Oct 30 21:21:31 CET 2011
SoC: Danube rev1.3
bootconsole [early0] enabled
CPU revision is: 00019641 (MIPS 24Kc)
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
  Normal   0x00000000 -> 0x00002000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00002000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
Kernel command line: console=ttyLTQ1,115200 rootfstype=squashfs,jffs2 machtype=GIGASX76X
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Writing ErrCtl register=00000008
Readback ErrCtl register=00000008
Memory: 29644k/32768k available (2195k kernel code, 3124k reserved, 376k data, 144k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:256
Calibrating delay loop... 221.69 BogoMIPS (lpj=443392)
Mount-cache hash table entries: 512
MIPS: no machine found for id: 'GIGASX76X', registered machines:
                              id name
                         Generic Generic Lantiq based board
                       EASY50712 EASY50712 Eval Board
                     ARV752DPW22 ARV752DPW22 - Arcor A803
                       ARV7518PW ARV7518PW - ASTORIA
                       ARV4525PW ARV4525PW - Speedport W502V
                       ARV452CPW ARV452CPW - Arcor A801
                       ARV4520PW ARV4520PW - Airties WAV-281, Arcor A800
                       ARV4518PW ARV4518PW - SMC7908A-ISP, Airties WAV-221
                       ARV4510PW ARV4510PW - Wippies Homebox
                        ARV3527P ARV3527P - Arcor Easybox 401
NET: Registered protocol family 16
MIPS: machine is Generic Lantiq based board
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
NET: Registered protocol family 1
gptu: totally 6 16-bit timers/counters
gptu: misc_register on minor 63
gptu: succeeded to request irq 126
gptu: succeeded to request irq 127
gptu: succeeded to request irq 128
gptu: succeeded to request irq 129
gptu: succeeded to request irq 130
gptu: succeeded to request irq 131
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  Š 2001-2006 Red Hat, Inc.
msgmni has been set to 57
io scheduler noop registered
io scheduler deadline registered (default)
ltq_asc.0: ttyLTQ0 at MMIO 0x1e100400 (irq = 104) is a ltq_asc
ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
console [ttyLTQ1] enabled, bootconsole disabled
console [ttyLTQ1] enabled, bootconsole disabled
ltq_nor: error registering platform driver
ltq_etop: Error registering platfom driver!
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Cannot open root device "<NULL>" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)


Attachments (0)

Change History (4)

comment:1 Changed 6 years ago by jow

  • Owner changed from developers to blogic
  • Status changed from new to assigned

comment:2 Changed 5 years ago by anonymous

PLEASE CLOSE

comment:3 Changed 5 years ago by jow

  • Resolution set to fixed
  • Status changed from assigned to closed

comment:4 Changed 4 years ago by jow

  • Milestone changed from Backfire 10.03.2 to Chaos Calmer (trunk)

Milestone Backfire 10.03.2 deleted

Add Comment

Modify Ticket

Action
as closed .
The resolution will be deleted. Next status will be 'reopened'.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.