Opened 6 years ago

Last modified 4 years ago

#10003 new defect

WAN cable requires two tries with netgear wndr3700v2

Reported by: srburnet@… Owned by: developers
Priority: normal Milestone: Barrier Breaker 14.07
Component: base system Version: Trunk
Keywords: Cc:


  1. Start with the wndr3700v2 powered off.
  2. Unplug the WAN cable.
  3. Power on the router and wait for it to fully boot.
  4. Plug in the WAN cable.
  5. Observe that the WAN light doesn't turn on and the interface doesn't acquire an address as it should.
  6. Unplug the WAN cable and plug it back in. Observe that the WAN light now turns on and the interface acquires an address as expected.

Attachments (0)

Change History (2)

comment:1 Changed 6 years ago by Martin G. <kommerz@…>

Maybe the same problem as described in these tickets since the hardware is the same:[[BR]]

a "/etc/init.d/network restart" could help out for the moment.

Whole discussion in /ticket/10017.html

comment:2 Changed 4 years ago by jow

  • Milestone changed from Attitude Adjustment 12.09 to Barrier Breaker 14.07

Milestone Attitude Adjustment 12.09 deleted

Add Comment

Modify Ticket

as new .

E-mail address and user name can be saved in the Preferences.

Note: See TracTickets for help on using tickets.