Changeset 803


Ignore:
Timestamp:
2005-05-05T11:37:29+02:00 (13 years ago)
Author:
nbd
Message:

add more config files to kismet, remove sound and speech features

Location:
trunk/openwrt/package/kismet
Files:
5 added
2 deleted
4 edited

Legend:

Unmodified
Added
Removed
  • trunk/openwrt/package/kismet/Makefile

    r738 r803  
    9797        $(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_SERVER) kismet-server.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) 
    9898        mkdir -p $(IDIR_SERVER)/etc 
     99        cp ./files/ap_manuf $(IDIR_SERVER)/etc/ 
     100        cp ./files/client_manuf $(IDIR_SERVER)/etc/ 
    99101        cp ./files/kismet.conf $(IDIR_SERVER)/etc/ 
    100102        echo '/etc/kismet.conf' > $(IDIR_SERVER)/CONTROL/conffiles 
     103        echo '/etc/ap_manuf' >> $(IDIR_SERVER)/CONTROL/conffiles 
     104        echo '/etc/client_manuf' >> $(IDIR_SERVER)/CONTROL/conffiles 
    101105        mkdir -p $(IDIR_SERVER)/usr/sbin 
    102106        cp $< $(IDIR_SERVER)/usr/sbin/ 
     
    125129        $(SCRIPT_DIR)/make-ipkg-dir.sh $(IDIR_CLIENT) kismet-client.control $(PKG_VERSION)-$(PKG_RELEASE) $(ARCH) 
    126130        mkdir -p $(IDIR_CLIENT)/etc 
     131        cp ./files/ap_manuf $(IDIR_CLIENT)/etc/ 
     132        cp ./files/client_manuf $(IDIR_CLIENT)/etc/ 
    127133        cp ./files/kismet.conf $(IDIR_CLIENT)/etc/ 
    128134        cp ./files/kismet_ui.conf $(IDIR_CLIENT)/etc/ 
    129135        echo '/etc/kismet.conf' > $(IDIR_CLIENT)/CONTROL/conffiles 
    130136        echo '/etc/kismet_ui.conf' >> $(IDIR_CLIENT)/CONTROL/conffiles 
     137        echo '/etc/ap_manuf' >> $(IDIR_CLIENT)/CONTROL/conffiles 
     138        echo '/etc/client_manuf' >> $(IDIR_CLIENT)/CONTROL/conffiles 
    131139        mkdir -p $(IDIR_CLIENT)/usr/sbin 
    132140        cp $< $(IDIR_CLIENT)/usr/sbin/ 
  • trunk/openwrt/package/kismet/files/kismet.conf

    r723 r803  
    55 
    66# Version of Kismet config 
    7 version=2004.10.R1 
     7version=2005.01.R1 
    88 
    99# Name of server (Purely for organiational purposes) 
     
    1111 
    1212# User to setid to (should be your normal user) 
    13 suiduser=root 
     13suiduser=nobody 
    1414 
    1515# Sources are defined as: 
     
    1919# to set the channel the interface listens on. 
    2020# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE 
    21 source=none,none,addme 
     21source=wrt54g,prism0,wireless 
    2222 
    2323# Comma-separated list of sources to enable.  This is only needed if you defined 
     
    100100 
    101101# Do we have a GPS? 
    102 gps=true 
     102gps=false 
    103103# Host:port that GPSD is running on.  This can be localhost OR remote! 
    104104gpshost=localhost:2947 
     
    161161# How often (in seconds) do we write all our data files (0 to disable) 
    162162writeinterval=300 
    163  
    164 # Do we use sound? 
    165 # Not to be confused with GUI sound parameter, this controls wether or not the 
    166 # server itself will play sound.  Primarily for headless or automated systems. 
    167 sound=false 
    168 # Path to sound player 
    169 soundplay=/usr/bin/play 
    170 # Optional parameters to pass to the player 
    171 # soundopts=--volume=.3 
    172 # New network found 
    173 sound_new=/tmp/share/kismet/wav/new_network.wav 
    174 # Wepped new network 
    175 # sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav 
    176 # Network traffic sound 
    177 sound_traffic=/tmp/share/kismet/wav/traffic.wav 
    178 # Network junk traffic found 
    179 sound_junktraffic=/tmp/share/kismet/wav/junk_traffic.wav 
    180 # GPS lock aquired sound 
    181 # sound_gpslock=/tmp/share/kismet/wav/foo.wav 
    182 # GPS lock lost sound 
    183 # sound_gpslost=/tmp/share/kismet/wav/bar.wav 
    184 # Alert sound 
    185 sound_alert=/tmp/share/kismet/wav/alert.wav 
    186  
    187 # Does the server have speech? (Again, not to be confused with the GUI's speech) 
    188 speech=false 
    189 # Server's path to Festival 
    190 festival=/usr/bin/festival 
    191 # How do we speak?  Valid options: 
    192 # speech    Normal speech 
    193 # nato      NATO spellings (alpha, bravo, charlie) 
    194 # spell     Spell the letters out (aye, bee, sea) 
    195 speech_type=nato 
    196 # speech_encrypted and speech_unencrypted - Speech templates 
    197 # Similar to the logtemplate option, this lets you customize the speech output. 
    198 # speech_encrypted is used for an encrypted network spoken string 
    199 # speech_unencrypted is used for an unencrypted network spoken string 
    200 # 
    201 # %b is replaced by the BSSID (MAC) of the network 
    202 # %s is replaced by the SSID (name) of the network 
    203 # %c is replaced by the CHANNEL of the network 
    204 # %r is replaced by the MAX RATE of the network 
    205 speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted. 
    206 speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open. 
    207163 
    208164# Where do we get our manufacturer fingerprints from?  Assumed to be in the 
  • trunk/openwrt/package/kismet/files/kismet_drone.conf

    r723 r803  
    11# Kismet drone config file 
    22 
    3 version=Feb.04.01a 
     3version=2005.04.R1 
    44 
    55# Name of server (Purely for organiational purposes) 
     
    77 
    88# User to setid to (should be your normal user) 
    9 suiduser=your_user_here 
     9suiduser=nobody 
    1010 
    1111# Port to serve packet data... This probably shouldn't be the same as the port 
     
    4949# source=prism2,wlan0,prism 
    5050# source=cisco,eth0,cisco 
    51  
    52 source=generic,prism0,Kismet-Drone 
     51source=wrt54g,prism0,wireless 
    5352 
    5453# Comma-separated list of sources to enable.  This is only needed if you wish  
  • trunk/openwrt/package/kismet/files/kismet_ui.conf

    r735 r803  
    22 
    33# Version of Kismet config 
    4 version=2004.10.R1 
     4version=2005.04.R1 
    55 
    66# Do we show the intro window? 
    7 showintro=true 
     7showintro=false 
    88 
    99# Gui type to use 
     
    2020# What columns do we display for clients?  Comma seperated. 
    2121clientcolumns=decay,type,mac,manuf,data,crypt,size,ip,signal,quality,noise 
    22 # Does the GUI use sound? 
    23 # NOT to be confused with "sound" option later, which is for the SERVER to make 
    24 # noise on whatever host it's running on. 
    25 sound=false 
    26 # Path to sound player 
    27 # soundplay=/usr/bin/play 
    28 # Optional parameters to pass to the player 
    29 # soundopts=--volume=.3 
    30 # New network found 
    31 # sound_new=/usr/share/kismet/wav/new_network.wav 
    32 # Wepped new network 
    33 # sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav 
    34 # Network traffic sound 
    35 # sound_traffic=/usr/share/kismet/wav/traffic.wav 
    36 # Network junk traffic found 
    37 # sound_junktraffic=/usr/share/kismet/wav/junk_traffic.wav 
    38 # GPS lock aquired sound 
    39 # sound_gpslock=/usr/share/kismet/wav/foo.wav 
    40 # GPS lock lost sound 
    41 # sound_gpslost=/usr/share/kismet/wav/bar.wav 
    42 # Alert sound 
    43 # sound_alert=/usr/share/kismet/wav/alert.wav 
    4422 
    4523# Do we auotmatically make a group for probed networks or do we show them 
     
    5129# Display battery status? 
    5230apm=false 
    53  
    54 # Does the GUI talk to us with Festival? 
    55 speech=false 
    56 # Where is festival located for the GUI? 
    57 festival=/usr/bin/festival 
    58 # How do we speak?  Valid options: 
    59 # speech    Normal speech 
    60 # nato      NATO spellings (alpha, bravo, charlie) 
    61 # spell     Spell the letters out (aye, bee, sea) 
    62 speech_type=nato 
    63 # speech_encrypted and speech_unencrypted - Speech templates 
    64 # Similar to the logtemplate option, this lets you customize the speech output. 
    65 # speech_encrypted is used for an encrypted network spoken string 
    66 # speech_unencrypted is used for an unencrypted network spoken string 
    67 # 
    68 # %b is replaced by the BSSID (MAC) of the network 
    69 # %s is replaced by the SSID (name) of the network 
    70 # %c is replaced by the CHANNEL of the network 
    71 # %r is replaced by the MAX RATE of the network 
    72 speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted. 
    73 speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open. 
    7431 
    7532# Simple borders (use - and | instead of smooth vertical and horizontal 
Note: See TracChangeset for help on using the changeset viewer.