Changeset 47940


Ignore:
Timestamp:
2015-12-19T12:27:32+01:00 (2 years ago)
Author:
nbd
Message:

ar71xx: Kernel board definition for PowerCloud CR5000

Kernel part of support for the PowerCloud Systems CR5000. The
CR5000 is a dual-band 802.11n wireless router with 8MB flash,
64 MB RAM, (unused in stock firmware) USB 2.0 port, and five
port gigabit ethernet switch. The CR5000 was sold as hardware for
the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@…>

Location:
trunk/target/linux/ar71xx
Files:
1 added
6 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/ar71xx/config-4.1

    r47939 r47940  
    5757CONFIG_ATH79_MACH_CPE510=y 
    5858CONFIG_ATH79_MACH_CR3000=y 
     59CONFIG_ATH79_MACH_CR5000=y 
    5960CONFIG_ATH79_MACH_DB120=y 
    6061CONFIG_ATH79_MACH_DGL_5500_A1=y 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

    r47939 r47940  
    934934        select ATH79_DEV_WMAC 
    935935 
     936config ATH79_MACH_CR5000 
     937        bool "PowerCloud CR5000 support" 
     938        select SOC_AR934X 
     939        select ATH79_DEV_AP9X_PCI if PCI 
     940        select ATH79_DEV_ETH 
     941        select ATH79_DEV_GPIO_BUTTONS 
     942        select ATH79_DEV_LEDS_GPIO 
     943        select ATH79_DEV_M25P80 
     944        select ATH79_DEV_USB 
     945        select ATH79_DEV_WMAC 
     946 
    936947config ATH79_MACH_MR1750 
    937948        bool "OpenMesh MR1750 board support" 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/Makefile

    r47939 r47940  
    6565obj-$(CONFIG_ATH79_MACH_CPE510)         += mach-cpe510.o 
    6666obj-$(CONFIG_ATH79_MACH_CR3000)         += mach-cr3000.o 
     67obj-$(CONFIG_ATH79_MACH_CR5000)         += mach-cr5000.o 
    6768obj-$(CONFIG_ATH79_MACH_DB120)          += mach-db120.o 
    6869obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)   += mach-dlan-hotspot.o 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

    r47939 r47940  
    4949        ATH79_MACH_CPE510,              /* TP-LINK CPE510 */ 
    5050        ATH79_MACH_CR3000,              /* PowerCloud CR3000 */ 
     51        ATH79_MACH_CR5000,              /* PowerCloud CR5000 */ 
    5152        ATH79_MACH_DB120,               /* Atheros DB120 reference board */ 
    5253        ATH79_MACH_PB44,                /* Atheros PB44 reference board */ 
  • trunk/target/linux/ar71xx/mikrotik/config-default

    r47939 r47940  
    2121# CONFIG_ATH79_MACH_CPE510 is not set 
    2222# CONFIG_ATH79_MACH_CR3000 is not set 
     23# CONFIG_ATH79_MACH_CR5000 is not set 
    2324# CONFIG_ATH79_MACH_DB120 is not set 
    2425# CONFIG_ATH79_MACH_DGL_5500_A1 is not set 
  • trunk/target/linux/ar71xx/nand/config-default

    r47939 r47940  
    1818# CONFIG_ATH79_MACH_CARAMBOLA2 is not set 
    1919# CONFIG_ATH79_MACH_CR3000 is not set 
     20# CONFIG_ATH79_MACH_CR5000 is not set 
    2021# CONFIG_ATH79_MACH_DB120 is not set 
    2122# CONFIG_ATH79_MACH_DIR_505_A1 is not set 
Note: See TracChangeset for help on using the changeset viewer.