Changeset 47939


Ignore:
Timestamp:
2015-12-19T12:27:25+01:00 (2 years ago)
Author:
nbd
Message:

ar71xx: Kernel board definition for PowerCloud CR3000

Kernel part of support for PowerCloud CR3000. The CR3000 is

a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM,
a four port fast ethernet switch, and a fast ethernet wan port which
was sold by PowerCloud Systems as hardware for the Skydog
cloud-managed router service.

Signed-off-by: Daniel Dickinson <openwrt@…>

Location:
trunk/target/linux/ar71xx
Files:
1 added
6 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/ar71xx/config-4.1

    r47938 r47939  
    5656CONFIG_ATH79_MACH_CF_E316N_V2=y 
    5757CONFIG_ATH79_MACH_CPE510=y 
     58CONFIG_ATH79_MACH_CR3000=y 
    5859CONFIG_ATH79_MACH_DB120=y 
    5960CONFIG_ATH79_MACH_DGL_5500_A1=y 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

    r47938 r47939  
    924924        select ATH79_DEV_WMAC 
    925925 
     926config ATH79_MACH_CR3000 
     927        bool "PowerCloud CR3000 support" 
     928        select SOC_AR934X 
     929        select ATH79_DEV_AP9X_PCI if PCI 
     930        select ATH79_DEV_ETH 
     931        select ATH79_DEV_GPIO_BUTTONS 
     932        select ATH79_DEV_LEDS_GPIO 
     933        select ATH79_DEV_M25P80 
     934        select ATH79_DEV_WMAC 
     935 
    926936config ATH79_MACH_MR1750 
    927937        bool "OpenMesh MR1750 board support" 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/Makefile

    r47938 r47939  
    6464obj-$(CONFIG_ATH79_MACH_CF_E316N_V2)    += mach-cf-e316n-v2.o 
    6565obj-$(CONFIG_ATH79_MACH_CPE510)         += mach-cpe510.o 
     66obj-$(CONFIG_ATH79_MACH_CR3000)         += mach-cr3000.o 
    6667obj-$(CONFIG_ATH79_MACH_DB120)          += mach-db120.o 
    6768obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT)   += mach-dlan-hotspot.o 
  • trunk/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

    r47938 r47939  
    4848        ATH79_MACH_CF_E316N_V2,         /* COMFAST CF-E316N v2 */ 
    4949        ATH79_MACH_CPE510,              /* TP-LINK CPE510 */ 
     50        ATH79_MACH_CR3000,              /* PowerCloud CR3000 */ 
    5051        ATH79_MACH_DB120,               /* Atheros DB120 reference board */ 
    5152        ATH79_MACH_PB44,                /* Atheros PB44 reference board */ 
  • trunk/target/linux/ar71xx/mikrotik/config-default

    r47938 r47939  
    2020# CONFIG_ATH79_MACH_CARAMBOLA2 is not set 
    2121# CONFIG_ATH79_MACH_CPE510 is not set 
     22# CONFIG_ATH79_MACH_CR3000 is not set 
    2223# CONFIG_ATH79_MACH_DB120 is not set 
    2324# CONFIG_ATH79_MACH_DGL_5500_A1 is not set 
  • trunk/target/linux/ar71xx/nand/config-default

    r47938 r47939  
    1717# CONFIG_ATH79_MACH_CAP4200AG is not set 
    1818# CONFIG_ATH79_MACH_CARAMBOLA2 is not set 
     19# CONFIG_ATH79_MACH_CR3000 is not set 
    1920# CONFIG_ATH79_MACH_DB120 is not set 
    2021# CONFIG_ATH79_MACH_DIR_505_A1 is not set 
Note: See TracChangeset for help on using the changeset viewer.