Changeset 44676


Ignore:
Timestamp:
2015-03-11T18:08:32+01:00 (3 years ago)
Author:
blogic
Message:

lantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970 to support dwc2

Here the device tree entry for ifxhcd is listed as compatible with one
supported in dwc2 (after patching the dwc driver appropriately).

A second entry is added to support the second core of the hcd. This
entry is listed to be compatible with only dwc2. Done this way there
should be backwards support for both hcd drivers (ltq-hcd and dwc2)

Signed-off-by: Antti Seppälä <a.seppala@…>
Signed-off-by: Vincent Pelletier <plr.vincent@…>

Location:
trunk/target/linux/lantiq/dts
Files:
3 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/lantiq/dts/P2812HNUFX.dtsi

    r43986 r44676  
    204204                        gpios = <&gpio 33 0>; 
    205205                        lantiq,portmask = <0x3>; 
     206                }; 
     207 
     208                ifxhcd@E106000 { 
     209                        status = "okay"; 
     210                        gpios = <&gpio 33 0>; 
    206211                }; 
    207212 
  • trunk/target/linux/lantiq/dts/TDW8970.dts

    r44352 r44676  
    130130                        lantiq,portmask = <0x3>; 
    131131                }; 
     132 
     133                ifxhcd@E106000 { 
     134                        status = "okay"; 
     135                        gpios = <&gpio 33 0>; 
     136                }; 
    132137        }; 
    133138 
  • trunk/target/linux/lantiq/dts/vr9.dtsi

    r44348 r44676  
    139139                ifxhcd@E101000 { 
    140140                        status = "disabled"; 
    141                         compatible = "lantiq,ifxhcd-xrx200"; 
     141                        compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2"; 
    142142                        reg = <0xE101000 0x1000 
    143143                                0xE120000 0x3f000>; 
    144144                        interrupt-parent = <&icu0>; 
    145145                        interrupts = <62 91>; 
     146                }; 
     147 
     148                ifxhcd@E106000 { 
     149                        status = "disabled"; 
     150                        compatible = "lantiq,ifxhcd-xrx200-dwc2"; 
     151                        reg = <0xE106000 0x1000>; 
     152                        interrupt-parent = <&icu0>; 
     153                        interrupts = <91>; 
    146154                }; 
    147155 
Note: See TracChangeset for help on using the changeset viewer.