Changeset 35769


Ignore:
Timestamp:
2013-02-24T19:08:14+01:00 (5 years ago)
Author:
juhosg
Message:

adm5120: add support for 3.8

Signed-off-by: Gabor Juhos <juhosg@…>

Location:
trunk/target/linux/adm5120
Files:
1 added
17 copied

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/adm5120/patches-3.8/001-adm5120.patch

    r35768 r35769  
    11--- a/arch/mips/Kconfig 
    22+++ b/arch/mips/Kconfig 
    3 @@ -50,6 +50,24 @@ choice 
     3@@ -51,6 +51,24 @@ choice 
    44        prompt "System type" 
    55        default SGI_IP22 
     
    2626        bool "Alchemy processor based machines" 
    2727        select 64BIT_PHYS_ADDR 
    28 @@ -855,6 +873,7 @@ config NLM_XLP_BOARD 
     28@@ -836,6 +854,7 @@ config NLM_XLP_BOARD 
    2929  
    3030 endchoice 
  • trunk/target/linux/adm5120/patches-3.8/002-adm5120_flash.patch

    r35768 r35769  
    11--- a/drivers/mtd/maps/Kconfig 
    22+++ b/drivers/mtd/maps/Kconfig 
    3 @@ -515,4 +515,8 @@ config MTD_LATCH_ADDR 
     3@@ -501,4 +501,8 @@ config MTD_LATCH_ADDR 
    44  
    55           If compiled as a module, it will be called latch-addr-flash. 
     
    1212--- a/drivers/mtd/maps/Makefile 
    1313+++ b/drivers/mtd/maps/Makefile 
    14 @@ -38,6 +38,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 
     14@@ -37,6 +37,7 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx2 
    1515 obj-$(CONFIG_MTD_DBOX2)                += dbox2-flash.o 
    1616 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o 
     
    1919 obj-$(CONFIG_MTD_AUTCPU12)     += autcpu12-nvram.o 
    2020 obj-$(CONFIG_MTD_IMPA7)                += impa7.o 
    21  obj-$(CONFIG_MTD_FORTUNET)     += fortunet.o 
     21 obj-$(CONFIG_MTD_UCLINUX)      += uclinux.o 
  • trunk/target/linux/adm5120/patches-3.8/005-adm5120_usb.patch

    r35768 r35769  
    3030+obj-$(CONFIG_USB_ADM5120_HCD)  += adm5120-hcd.o 
    3131 obj-$(CONFIG_USB_EHCI_HCD)     += ehci-hcd.o 
    32  obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o 
    33  obj-$(CONFIG_USB_ISP116X_HCD)  += isp116x-hcd.o 
     32 obj-$(CONFIG_USB_EHCI_PCI)     += ehci-pci.o 
     33 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)    += ehci-platform.o 
  • trunk/target/linux/adm5120/patches-3.8/009-adm5120_leds_switch_trigger.patch

    r35768 r35769  
    11--- a/drivers/leds/Kconfig 
    22+++ b/drivers/leds/Kconfig 
    3 @@ -577,4 +577,12 @@ config LEDS_TRIGGER_USBDEV 
     3@@ -579,4 +579,12 @@ config LEDS_TRIGGER_USBDEV 
    44          This allows LEDs to be controlled by the presence/activity of 
    55          an USB device. If unsure, say N. 
  • trunk/target/linux/adm5120/patches-3.8/203-gpio_leds_brightness.patch

    r35768 r35769  
    11--- a/drivers/leds/leds-gpio.c 
    22+++ b/drivers/leds/leds-gpio.c 
    3 @@ -55,13 +55,17 @@ static void gpio_led_set(struct led_clas 
     3@@ -56,13 +56,17 @@ static void gpio_led_set(struct led_clas 
    44                container_of(led_cdev, struct gpio_led_data, cdev); 
    55        int level; 
  • trunk/target/linux/adm5120/patches-3.8/310-adm5120_wdt.patch

    r35768 r35769  
    11--- a/drivers/watchdog/Kconfig 
    22+++ b/drivers/watchdog/Kconfig 
    3 @@ -972,6 +972,18 @@ config RC32434_WDT 
     3@@ -984,6 +984,18 @@ config RC32434_WDT 
    44          To compile this driver as a module, choose M here: the 
    55          module will be called rc32434_wdt. 
Note: See TracChangeset for help on using the changeset viewer.