Changeset 35736


Ignore:
Timestamp:
2013-02-21T21:39:22+01:00 (5 years ago)
Author:
juhosg
Message:

mpc83xx: add support for 3.8

Signed-off-by: Gabor Juhos <juhosg@…>

Location:
trunk/target/linux/mpc83xx
Files:
1 added
11 copied

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/mpc83xx/config-3.8

    r35735 r35736  
    3232CONFIG_BOUNCE=y 
    3333CONFIG_CC_OPTIMIZE_FOR_SIZE=y 
     34CONFIG_CLONE_BACKWARDS=y 
    3435CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2" 
    3536CONFIG_CMDLINE_BOOL=y 
     
    5657CONFIG_CRYPTO_HMAC=m 
    5758CONFIG_CRYPTO_HW=y 
     59CONFIG_CRYPTO_MANAGER=y 
     60CONFIG_CRYPTO_MANAGER2=y 
    5861CONFIG_CRYPTO_MD5=m 
    59 CONFIG_CRYPTO_PCOMP2=y 
    6062CONFIG_CRYPTO_RNG2=y 
    6163CONFIG_CRYPTO_SHA1=m 
     
    98100CONFIG_GENERIC_IRQ_SHOW_LEVEL=y 
    99101CONFIG_GENERIC_ISA_DMA=y 
    100 CONFIG_GENERIC_KERNEL_THREAD=y 
    101102CONFIG_GENERIC_NVRAM=y 
    102103CONFIG_GENERIC_PCI_IOMAP=y 
     
    139140CONFIG_HAVE_MEMBLOCK_NODE_MAP=y 
    140141CONFIG_HAVE_MOD_ARCH_SPECIFIC=y 
     142CONFIG_HAVE_NET_DSA=y 
    141143CONFIG_HAVE_OPROFILE=y 
    142144CONFIG_HAVE_PERF_EVENTS=y 
     
    277279CONFIG_PCI_DOMAINS=y 
    278280CONFIG_PCI_MSI=y 
     281CONFIG_PERCPU_RWSEM=y 
    279282CONFIG_PHYLIB=y 
    280283CONFIG_PHYSICAL_START=0x00000000 
     
    331334CONFIG_PROC_DEVICETREE=y 
    332335CONFIG_PROC_PAGE_MONITOR=y 
     336# CONFIG_PTP_1588_CLOCK_GIANFAR is not set 
    333337CONFIG_QE_GPIO=y 
    334338CONFIG_QUICC_ENGINE=y 
     
    342346# CONFIG_SCSI_MULTI_LUN is not set 
    343347# CONFIG_SCSI_PROC_FS is not set 
     348CONFIG_SCTP_COOKIE_HMAC_MD5=y 
     349# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set 
    344350# CONFIG_SCTP_DBG_MSG is not set 
    345351# CONFIG_SCTP_DBG_OBJCNT is not set 
    346 CONFIG_SCTP_HMAC_MD5=y 
    347 # CONFIG_SCTP_HMAC_NONE is not set 
    348 # CONFIG_SCTP_HMAC_SHA1 is not set 
     352CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y 
     353# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set 
     354# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set 
    349355CONFIG_SERIAL_8250_FSL=y 
    350356CONFIG_SERIAL_8250_PCI=y 
  • trunk/target/linux/mpc83xx/patches-3.8/111-etsec27_war.patch

    r35735 r35736  
    11--- a/drivers/net/ethernet/freescale/gianfar.c 
    22+++ b/drivers/net/ethernet/freescale/gianfar.c 
    3 @@ -1009,7 +1009,16 @@ static int gfar_probe(struct platform_de 
     3@@ -1005,7 +1005,16 @@ static int gfar_probe(struct platform_de 
    44        /* We need to delay at least 3 TX clocks */ 
    55        udelay(2); 
  • trunk/target/linux/mpc83xx/patches-3.8/201-powerpc-add-rb_iomap.patch

    r35735 r35736  
    2525--- a/arch/powerpc/platforms/Kconfig 
    2626+++ b/arch/powerpc/platforms/Kconfig 
    27 @@ -191,6 +191,10 @@ config PPC_INDIRECT_MMIO 
     27@@ -192,6 +192,10 @@ config PPC_INDIRECT_MMIO 
    2828 config PPC_IO_WORKAROUNDS 
    2929        bool 
  • trunk/target/linux/mpc83xx/patches-3.8/203-mtd-add-rbppc_nand-driver.patch

    r35735 r35736  
    11--- a/drivers/mtd/nand/Kconfig 
    22+++ b/drivers/mtd/nand/Kconfig 
    3 @@ -454,6 +454,13 @@ config MTD_NAND_PLATFORM 
     3@@ -463,6 +463,13 @@ config MTD_NAND_PLATFORM 
    44          devices. You will need to provide platform-specific functions 
    55          via platform_data. 
     
    147147+static unsigned init_ok = 0; 
    148148+ 
    149 +static int __devinit rbppc_nand_probe(struct platform_device *pdev) 
     149+static int rbppc_nand_probe(struct platform_device *pdev) 
    150150+{ 
    151151+       struct device_node *gpio; 
Note: See TracChangeset for help on using the changeset viewer.