Changeset 29837


Ignore:
Timestamp:
2012-01-21T02:15:24+01:00 (6 years ago)
Author:
mirko
Message:

trying to make README file a bit more helpful

File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/README

    r19989 r29837  
    1 This is the buildsystem for the OpenWrt Linux distribution 
     1This is the buildsystem for the OpenWrt Linux distribution. 
    22 
    33Please use "make menuconfig" to configure your appreciated 
     
    77make, gettext, pkg-config, unzip, libz-dev and libc headers. 
    88 
    9 Simply running 'make' will build your firmware. 
     9Run "./scripts/feeds update" to get the latest package definitions 
     10defined in feeds.conf / feeds.conf.default respectively 
     11and "./scripts/feeds install" to install symlinks into "package/feeds/*". 
     12 
     13Use "make menuconfig" to configure your image. 
     14 
     15Simply running "make" will build your firmware. 
    1016It will download all sources, build the cross-compile toolchain,  
    1117the kernel and all choosen applications. 
    1218 
    13 You can use scripts/flashing/flash.sh for remotely updating your embedded 
     19You can use "scripts/flashing/flash.sh" for remotely updating your embedded 
    1420system via tftp. 
    1521 
    1622The OpenWrt system is documented in docs/. You will need a LaTeX distribution 
    17 and the tex4ht package to build the documentation. Type make -C docs/ to build it. 
     23and the tex4ht package to build the documentation. Type "make -C docs/" to build it. 
    1824 
    19 Building your own firmware you need to have access to a Linux, BSD or MacOSX system. 
    20 Cygwin will not be supported because of the lack of case sensitiveness. 
     25To build your own firmware you need to have access to a Linux, BSD or MacOSX system 
     26(case-sensitive filesystem required). Cygwin will not be supported because of 
     27the lack of case sensitiveness in the file system. 
     28 
    2129 
    2230Sunshine! 
Note: See TracChangeset for help on using the changeset viewer.