Changeset 27075


Ignore:
Timestamp:
2011-06-01T04:23:26+02:00 (7 years ago)
Author:
nbd
Message:

ar71xx: add kernel support for the buffalo wzr-hp-ag300h

Location:
trunk/target/linux/ar71xx
Files:
1 added
4 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/ar71xx/config-2.6.37

    r27067 r27075  
    4848CONFIG_AR71XX_MACH_WRT160NL=y 
    4949CONFIG_AR71XX_MACH_WRT400N=y 
     50CONFIG_AR71XX_MACH_WZR_HP_AG300H=y 
    5051CONFIG_AR71XX_MACH_WZR_HP_G300NH=y 
    5152CONFIG_AR71XX_MACH_ZCN_1523H=y 
     
    147148# CONFIG_MTD_CFI_INTELEXT is not set 
    148149CONFIG_MTD_CMDLINE_PARTS=y 
     150CONFIG_MTD_CONCAT=y 
    149151CONFIG_MTD_JEDECPROBE=y 
    150152CONFIG_MTD_M25P80=y 
  • trunk/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

    r27067 r27075  
    135135        select AR71XX_DEV_LEDS_GPIO 
    136136        default n 
     137 
     138config AR71XX_MACH_WZR_HP_AG300H 
     139        bool "Buffalo WZR-HP-AG300H board support" 
     140        select SOC_AR71XX 
     141        select AR71XX_DEV_M25P80 
     142        select AR71XX_DEV_GPIO_BUTTONS 
     143        select AR71XX_DEV_LEDS_GPIO 
     144        select AR71XX_DEV_USB 
     145        default y 
    137146 
    138147config AR71XX_MACH_WZR_HP_G300NH 
  • trunk/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

    r27067 r27075  
    6464obj-$(CONFIG_AR71XX_MACH_WRT400N)       += mach-wrt400n.o 
    6565obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o 
     66obj-$(CONFIG_AR71XX_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o 
    6667obj-$(CONFIG_AR71XX_MACH_ZCN_1523H)     += mach-zcn-1523h.o 
  • trunk/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h

    r27067 r27075  
    6363        AR71XX_MACH_WRT160NL,   /* Linksys WRT160NL */ 
    6464        AR71XX_MACH_WRT400N,    /* Linksys WRT400N */ 
     65        AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ 
    6566        AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ 
    6667        AR71XX_MACH_WZR_HP_G301NH, /* Buffalo WZR-HP-G301NH */ 
Note: See TracChangeset for help on using the changeset viewer.