Changeset 26779

Timestamp:

2011-04-28T23:27:42+02:00 (7 years ago)

Author:

nbd

Message:

ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config

Location:

trunk/target/linux/ar71xx

Files:

• base-files/etc/defconfig/pb92 (added)
• base-files/etc/defconfig/pb92/network (added)
• base-files/lib/ar71xx.sh (modified) (1 diff)
• files/arch/mips/ar71xx/mach-pb92.c (modified) (1 diff)

trunk/target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -61 +61 @@
         *PB44)
                 name="pb44"
+                ;;
+        *PB92)
+                name="pb92"
                 ;;
         *"RouterBOARD 411/A/AH")

trunk/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c

@@ -87 +87 @@
         ar71xx_add_device_m25p80(&pb92_flash_data);
 
-        ar71xx_add_device_mdio(~0);
+        ar71xx_add_device_mdio(~BIT(0));
         ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
-        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
         ar71xx_eth0_data.speed = SPEED_1000;
         ar71xx_eth0_data.duplex = DUPLEX_FULL;
-
-        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1);
-        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
-        ar71xx_eth1_data.speed = SPEED_1000;
-        ar71xx_eth1_data.duplex = DUPLEX_FULL;
+        ar71xx_eth0_data.phy_mask = BIT(0);
 
         ar71xx_add_device_eth(0);
-        ar71xx_add_device_eth(1);
 
         ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,