Changeset 18058


Ignore:
Timestamp:
2009-10-18T10:48:07+02:00 (8 years ago)
Author:
juhosg
Message:

ramips: add preliminary support for the DIR-300 revB board

Location:
trunk/target/linux/ramips
Files:
1 added
5 edited

Legend:

Unmodified
Added
Removed
  • trunk/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h

    r17473 r18058  
    1414        RAMIPS_MACH_RT_N15,             /* Asus RT-N15 */ 
    1515 
     16        /* RT3050 based machines */ 
     17        RAMIPS_MACH_DIR_300_REVB,       /* D-Link DIR-300 rev B */ 
     18 
    1619        /* RT3052 based machines */ 
    1720        RAMIPS_MACH_V22RW_2X2,          /* Ralink AP-RT3052-V22RW-2X2 */ 
  • trunk/target/linux/ramips/files/arch/mips/ralink/common/prom.c

    r17473 r18058  
    3333                .name           = "RT-N15", 
    3434                .mach_type      = RAMIPS_MACH_RT_N15, 
     35        }, { 
     36                .name           = "DIR-300-revB", 
     37                .mach_type      = RAMIPS_MACH_DIR_300_REVB, 
    3538        }, { 
    3639                .name           = "V22RW-2X2", 
  • trunk/target/linux/ramips/files/arch/mips/ralink/rt305x/Kconfig

    r17473 r18058  
    55config RT305X_MACH_WHR_G300N 
    66        bool "Buffalo WHR-G300N support" 
     7        default y 
     8        select RALINK_DEV_GPIO_LEDS 
     9 
     10config RT305X_MACH_DIR_300_REVB 
     11        bool "D-Link DIR-300 revB board support" 
    712        default y 
    813        select RALINK_DEV_GPIO_LEDS 
  • trunk/target/linux/ramips/files/arch/mips/ralink/rt305x/Makefile

    r17473 r18058  
    1212obj-$(CONFIG_EARLY_PRINTK)              += early_printk.o 
    1313 
     14obj-$(CONFIG_RT305X_MACH_DIR_300_REVB)  += mach-dir-300-revb.o 
    1415obj-$(CONFIG_RT305X_MACH_V22RW_2X2)     += mach-v22rw-2x2.o 
    1516obj-$(CONFIG_RT305X_MACH_WHR_G300N)     += mach-whr-g300n.o 
  • trunk/target/linux/ramips/rt305x/config-2.6.30

    r17905 r18058  
    116116# CONFIG_RALINK_RT288X is not set 
    117117CONFIG_RALINK_RT305X=y 
     118CONFIG_RT305X_MACH_DIR_300_REVB=y 
    118119CONFIG_RT305X_MACH_V22RW_2X2=y 
    119120CONFIG_RT305X_MACH_WHR_G300N=y 
Note: See TracChangeset for help on using the changeset viewer.