Ticket #7630: backfire-2.4-dmesg-lspci.txt

File backfire-2.4-dmesg-lspci.txt, 13.2 KB (added by realopty, 7 years ago)

dmesg / lspci of backfire 2.4 - no wifi

Line 
1dmesg
2CPU revision is: 00029006
3Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
4Primary data cache 16kB, 2-way, linesize 16 bytes.
5Linux version 2.4.37.9 (will@bedroom) (gcc version 3.4.6 (OpenWrt-2.0)) #3 Sat Aug 7 18:24:22 MST 2010
6Setting the PFC to its default value
7Determined physical RAM map:
8 memory: 01000000 @ 00000000 (usable)
9On node 0 totalpages: 4096
10zone(0): 4096 pages.
11zone(1): 0 pages.
12zone(2): 0 pages.
13Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
14CPU: BCM4704 rev 9 at 264 MHz
15Using 132.000 MHz high precision timer.
16Calibrating delay loop... 262.96 BogoMIPS
17Memory: 14252k/16384k available (1439k kernel code, 2132k reserved, 96k data, 84k init, 0k highmem)
18Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
19Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
20Mount cache hash table entries: 512 (order: 0, 4096 bytes)
21Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
22Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
23Checking for 'wait' instruction...  unavailable.
24POSIX conformance testing by UNIFIX
25PCI: Initializing host
26PCI: Enabling CardBus
27PCI: Fixing up bus 0
28PCI: Fixing up bridge
29PCI: Setting latency timer of device 01:00.0 to 64
30PCI: Fixing up bus 1
31Linux NET4.0 for Linux 2.4
32Based upon Swansea University Computer Society NET3.039
33Initializing RT netlink socket
34Starting kswapd
35Registering mini_fo version $Id$
36devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
37devfs: boot_options: 0x1
38JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
39squashfs: version 3.0 (2006/03/15) Phillip Lougher
40pty: 256 Unix98 ptys configured
41Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
42ttyS00 at 0xb8000300 (irq = 3) is a 16550A
43ttyS01 at 0xb8000400 (irq = 3) is a 16550A
44b44.c:v0.93 (Mar, 2004)
45PCI: Setting latency timer of device 00:01.0 to 64
46eth0: Broadcom 47xx 10/100BaseT Ethernet 00:22:3f:7c:4b:76
47PCI: Setting latency timer of device 00:02.0 to 64
48eth1: Broadcom 47xx 10/100BaseT Ethernet 00:22:3f:7c:4b:77
49Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
50Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
51Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
52Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
53Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
54Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
55Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
56 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
57number of CFI chips: 1
58cfi_cmdset_0002: Disabling fast programming due to code brokenness.
59Flash device: 0x400000 at 0x1c000000
60bootloader size: 131072
61Physically mapped flash: Filesystem type: squashfs, size=0x17a4ee
62Updating TRX offsets and length:
63old trx = [0x0000001c, 0x00000904, 0x0007b400], len=0x00221000 crc32=0xf305f443
64new trx = [0x0000001c, 0x00000904, 0x0007b400], len=0x00200000 crc32=0x832e756f
65Done
66Creating 5 MTD partitions on "Physically mapped flash":
670x00000000-0x00020000 : "cfe"
680x00020000-0x003f0000 : "linux"
690x0009b400-0x00220000 : "rootfs"
70mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
710x003f0000-0x00400000 : "nvram"
720x00220000-0x003f0000 : "rootfs_data"
73sflash: found no supported devices
74Initializing Cryptographic API
75NET4: Linux TCP/IP 1.0 for NET4.0
76IP Protocols: ICMP, UDP, TCP, IGMP
77IP: routing cache hash table of 512 buckets, 4Kbytes
78TCP: Hash tables configured (established 1024 bind 2048)
79Linux IP multicast router 0.06 plus PIM-SM
80NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
81NET4: Ethernet Bridge 008 for NET4.0
82802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
83All bugs added by David S. Miller <davem@redhat.com>
84VFS: Mounted root (squashfs filesystem) readonly.
85Mounted devfs on /dev
86Freeing unused kernel memory: 84k freed
87diag: Router model not detected.
88b44: eth0: Link is up at 100 Mbps, full duplex.
89b44: eth0: Flow control is off for TX and off for RX.
90roboswitch: Probing device eth0: found a 5325! It's a 5350.
91mini_fo: using base directory: /
92mini_fo: using storage directory: /tmp/root
93jffs2.bbc: SIZE compression mode activated.
94b44: eth0: Link is up at 100 Mbps, full duplex.
95b44: eth0: Flow control is off for TX and off for RX.
96device eth0 entered promiscuous mode
97br-lan: port 1(eth0) entering learning state
98br-lan: port 1(eth0) entering forwarding state
99br-lan: topology change detected, propagating
100b44: eth1: Link is up at 100 Mbps, full duplex.
101b44: eth1: Flow control is off for TX and off for RX.
102b44: eth1: Link is up at 100 Mbps, full duplex.
103b44: eth1: Flow control is off for TX and off for RX.
104br-lan: port 1(eth0) entering disabled state
105br-lan: port 1(eth0) entering learning state
106br-lan: port 1(eth0) entering forwarding state
107br-lan: topology change detected, propagating
108PCI: Setting latency timer of device 01:01.0 to 64
109PCI: Enabling device 01:01.0 (0004 -> 0006)
110PCI/DMA
111wl0: wlc_attach: failed with err 13
112wl%d: 4.150.10.5 driver failed with code 13
113unregister_netdevice: device wl%d/80238620 never was registered
114Memory leak of bytes -539
115CSLIP: code copyright 1989 Regents of the University of California
116PPP generic driver version 2.4.2
117ip_tables: (C) 2000-2002 Netfilter core team
118ip_conntrack version 2.1 (5953 buckets, 5953 max) - 336 bytes per conntrack
119No Broadcom devices found.
120fuse init (API version 7.5)
121fuse distribution version: 2.5.3
122fuse init: DCACHE_BUG enabled
123jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
124jffs2_build_filesystem(): unlocking the mtd device... done.
125jffs2_build_filesystem(): erasing all blocks after the end marker... done.
126mini_fo: using base directory: /
127mini_fo: using storage directory: /overlay
128br-lan: port 1(eth0) entering disabled state
129br-lan: port 1(eth0) entering disabled state
130device eth0 left promiscuous mode
131b44: eth0: Link is up at 100 Mbps, full duplex.
132b44: eth0: Flow control is off for TX and off for RX.
133b44: eth0: Link is up at 100 Mbps, full duplex.
134b44: eth0: Flow control is off for TX and off for RX.
135device eth0 entered promiscuous mode
136br-lan: port 1(eth0) entering learning state
137br-lan: port 1(eth0) entering forwarding state
138br-lan: topology change detected, propagating
139b44: eth1: Link is up at 100 Mbps, full duplex.
140b44: eth1: Flow control is off for TX and off for RX.
141b44: eth1: Link is up at 100 Mbps, full duplex.
142b44: eth1: Flow control is off for TX and off for RX.
143b44: eth1: Link is up at 100 Mbps, full duplex.
144b44: eth1: Flow control is off for TX and off for RX.
145br-lan: port 1(eth0) entering disabled state
146br-lan: port 1(eth0) entering learning state
147br-lan: port 1(eth0) entering forwarding state
148br-lan: topology change detected, propagating
149root@OpenWrt:/# lspci -vv
15000:00.0 FLASH memory: Broadcom Corporation Sentry5 Chipcommon I/O Controller (rev 09)
151        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
152        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
153        Interrupt: pin ? routed to IRQ 3
154        Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
155        Region 1: Memory at 1fc00000 (32-bit, non-prefetchable) [disabled] [size=4M]
156        Region 2: Memory at 1c000000 (32-bit, non-prefetchable) [disabled] [size=32M]
157        Region 3: Memory at 1a000000 (32-bit, non-prefetchable) [disabled] [size=32M]
158        Expansion ROM at <unassigned> [disabled] [size=2K]
159
16000:01.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller (rev 09)
161        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
162        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
163        Latency: 64
164        Interrupt: pin A routed to IRQ 4
165        Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
166        Expansion ROM at <unassigned> [disabled] [size=2K]
167
16800:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller (rev 09)
169        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
170        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
171        Latency: 64
172        Interrupt: pin B routed to IRQ 5
173        Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
174        Expansion ROM at <unassigned> [disabled] [size=2K]
175
17600:03.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (rev 09) (prog-if 10 [OHCI])
177        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
178        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
179        Interrupt: pin C routed to IRQ 6
180        Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
181        Expansion ROM at <unassigned> [disabled] [size=2K]
182
18300:04.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (rev 09) (prog-if 00 [Normal decode])
184        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
185        Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+ INTx+
186        Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
187        Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
188        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
189        I/O behind bridge: 00000000-00000fff
190        Memory behind bridge: 00000000-000fffff
191        Prefetchable memory behind bridge: 00000000-000fffff
192        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
193        Expansion ROM at <unassigned> [disabled] [size=2K]
194        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
195                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
196
19700:05.0 MIPS: Broadcom Corporation BCM3302 Sentry5 MIPS32 CPU (rev 09)
198        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
199        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
200        Interrupt: pin E routed to IRQ 2
201        Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
202        Expansion ROM at <unassigned> [disabled] [size=2K]
203
20400:06.0 Modem: Broadcom Corporation BCM47xx V.92 56k modem (rev 09) (prog-if 00 [Generic])
205        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
206        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
207        Interrupt: pin F routed to IRQ 2
208        Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
209        Expansion ROM at <unassigned> [disabled] [size=2K]
210
21100:07.0 Network and computing encryption device: Broadcom Corporation Sentry5 Crypto Accelerator (rev 09)
212        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
213        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
214        Interrupt: pin G routed to IRQ 2
215        Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
216        Expansion ROM at <unassigned> [disabled] [size=2K]
217
21800:08.0 RAM memory: Broadcom Corporation Sentry5 DDR/SDR RAM Controller (rev 09)
219        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
220        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
221        Interrupt: pin ? routed to IRQ 3
222        Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
223        Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
224        Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
225        Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=512M]
226        Expansion ROM at <unassigned> [disabled] [size=2K]
227
22801:00.0 Host bridge: Broadcom Corporation BCM4704 PCI to SB Bridge (rev 09)
229        Subsystem: Broadcom Corporation BCM4704 PCI to SB Bridge
230        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
231        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
232        Latency: 64
233        Interrupt: pin A routed to IRQ 2
234        Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
235        Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
236
23701:01.0 Network controller: Broadcom Corporation BCM4306 802.11a Wireless LAN Controller (rev 01)
238        Subsystem: Broadcom Corporation BCM4306 802.11a Wireless LAN Controller
239        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
240        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
241        Latency: 64
242        Interrupt: pin A routed to IRQ 2
243        Region 0: Memory at 40004000 (32-bit, non-prefetchable) [size=16K]
244
245root@OpenWrt:/#
246