Ticket #3255: 2.6.23.16_r10517_fail_boot.txt

File 2.6.23.16_r10517_fail_boot.txt, 13.4 KB (added by Orlik - cfanygapa@…, 10 years ago)

Failed boot serial console log

Line 
1CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
2Build Date: €T 12€ë 14 15:54:18 CST 2005 (root@localhost.localdomain)
3Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
4
5Initializing Arena
6Initializing Devices.
7et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
8rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
9CPU type 0x29006: 264MHz
10Total memory: 33554432 KBytes
11
12Total memory used by CFE:  0x80800000 - 0x8089B590 (636304)
13Initialized Data:          0x80831700 - 0x80833DE0 (9952)
14BSS Area:                  0x80833DE0 - 0x80835590 (6064)
15Local Heap:                0x80835590 - 0x80899590 (409600)
16Stack Area:                0x80899590 - 0x8089B590 (8192)
17Text (code) segment:       0x80800000 - 0x80831700 (202496)
18Boot area (physical):      0x0089C000 - 0x008DC000
19Relocation Factor:         I:00000000 - D:00000000
20
21Device eth0:  hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask 255.255.255.0
22        gateway not set, nameserver not set
23Null Rescue Flag.
24Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
25Loading: .. 3740 bytes read
26Entry at 0x80001000
27Closing network.
28Starting program at 0x80001000
29Linux version 2.6.23.16 (orlik@testdeb) (gcc version 4.1.2) #2 Sat Feb 23 09:08:55 EST 2008
30CPU revision is: 00029006
31ssb: Sonics Silicon Backplane found at address 0x18000000
32Determined physical RAM map:
33 memory: 02000000 @ 00000000 (usable)
34Initrd not found or empty - disabling initrd
35Built 1 zonelists in Zone order.  Total pages: 8128
36Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200
37Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
38Primary data cache 16kB, 2-way, linesize 16 bytes.
39Synthesized TLB refill handler (21 instructions).
40Synthesized TLB load handler fastpath (33 instructions).
41Synthesized TLB store handler fastpath (33 instructions).
42Synthesized TLB modify handler fastpath (32 instructions).
43PID hash table entries: 128 (order: 7, 512 bytes)
44Using 132.000 MHz high precision timer.
45console [ttyS0] enabled
46Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
47Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
48Memory: 29628k/32768k available (2237k kernel code, 3140k reserved, 350k data, 124k init, 0k highmem)
49Mount-cache hash table entries: 512
50NET: Registered protocol family 16
51SCSI subsystem initialized
52usbcore: registered new interface driver usbfs
53usbcore: registered new interface driver hub
54usbcore: registered new device driver usb
55Time: MIPS clocksource has been installed.
56Registering a PCI bus after boot
57PCI: Fixing up bridge 0000:00:00.0
58PCI: Fixing up device 0000:00:00.0
59PCI: Fixing latency timer of device 0000:00:00.0 to 168
60NET: Registered protocol family 2
61IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
62TCP established hash table entries: 1024 (order: 1, 8192 bytes)
63TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
64TCP: Hash tables configured (established 1024 bind 1024)
65TCP reno registered
66detected lzma initramfs
67initramfs: LZMA lc=1,lp=2,pb=2,origSize=512
68JFFS2 version 2.2. (NAND) Š 2001-2006 Red Hat, Inc.
69io scheduler noop registered
70io scheduler deadline registered (default)
71Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
72serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
73serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
74b44.c:v1.01 (Jun 16, 2006)
75eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70
76eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d
77flash init: 0x1c000000 0x02000000
78Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
79 Amd/Fujitsu Extended Query Table at 0x0040
80Physically mapped flash: CFI does not contain boot bank location. Assuming top.
81number of CFI chips: 1
82cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
83Flash device: 0x800000 at 0x1fc00000
84bootloader size: 262144
85Creating 4 MTD partitions on "Physically mapped flash":
860x00000000-0x00040000 : "cfe"
870x00040000-0x007f0000 : "linux"
880x00120000-0x007f0000 : "rootfs"
89mtd: partition "rootfs" set to be root filesystem
90split_squashfs: no squashfs found in "Physically mapped flash"
910x007f0000-0x00800000 : "nvram"
92PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
93PCI: Fixing up device 0000:00:03.2
94ehci_hcd 0000:00:03.2: EHCI Host Controller
95ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
96ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000
97ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
98usb usb1: configuration #1 chosen from 1 choice
99hub 1-0:1.0: USB hub found
100hub 1-0:1.0: 4 ports detected
101ohci_hcd ssb0:2: SSB OHCI Controller
102ohci_hcd ssb0:2: new USB bus registered, assigned bus number 2
103ohci_hcd ssb0:2: irq 6, io mem 0x18003000
104usb usb2: configuration #1 chosen from 1 choice
105hub 2-0:1.0: USB hub found
106hub 2-0:1.0: 2 ports detected
107USB Universal Host Controller Interface driver v3.0
108PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
109PCI: Fixing up device 0000:00:03.0
110uhci_hcd 0000:00:03.0: UHCI Host Controller
111uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 3
112uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
113usb usb3: configuration #1 chosen from 1 choice
114hub 3-0:1.0: USB hub found
115hub 3-0:1.0: 2 ports detected
116usb 1-2: new high speed USB device using ehci_hcd and address 2
117PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
118PCI: Fixing up device 0000:00:03.1
119uhci_hcd 0000:00:03.1: UHCI Host Controller
120uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 4
121uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
122usb usb4: configuration #1 chosen from 1 choice
123hub 4-0:1.0: USB hub found
124hub 4-0:1.0: 2 ports detected
125usb 1-2: configuration #1 chosen from 1 choice
126Initializing USB Mass Storage driver...
127scsi0 : SCSI emulation for USB Mass Storage devices
128usbcore: registered new interface driver usb-storage
129USB Mass Storage support registered.
130nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
131ip_tables: (C) 2000-2006 Netfilter Core Team
132TCP cubic registered
133NET: Registered protocol family 1
134NET: Registered protocol family 17
135802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
136All bugs added by David S. Miller <davem@redhat.com>
137Waiting 10sec before mounting root device...
138scsi 0:0:0:0: Direct-Access     TOSHIBA  MK1016GAP        U1.1 PQ: 0 ANSI: 0 CCS
139sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
140sd 0:0:0:0: [sda] Write Protect is off
141sd 0:0:0:0: [sda] Assuming drive cache: write through
142sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
143sd 0:0:0:0: [sda] Write Protect is off
144sd 0:0:0:0: [sda] Assuming drive cache: write through
145 sda: sda1 sda2
146sd 0:0:0:0: [sda] Attached SCSI disk
147kjournald starting.  Commit interval 5 seconds
148EXT3-fs: mounted filesystem with ordered data mode.
149VFS: Mounted root (ext3 filesystem) readonly.
150Freeing unused kernel memory: 124k freed
151Algorithmics/MIPS FPU Emulator v1.5
152INIT: version 2.86 booting
153/etc/init.d/rc: line 77:   153 Bus error               $@
154/etc/init.d/rc: line 77:   169 Bus error               $@
155/etc/init.d/rc: line 77:   172 Bus error               $@
156/etc/rcS.d/S03udev: line 60:   207 Done                    grep '^[^#]' /etc/udev/links.conf
157       208 Bus error               | while read type name arg1; do
158    [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] || continue; case "$type" in
159        L)
160            ln -s $arg1 /dev/$name
161        ;;
162        D)
163            mkdir -p /dev/$name
164        ;;
165        M)
166            mknod -m 600 /dev/$name $arg1
167        ;;
168        *)
169            log_warning_msg "links.conf: unparseable line ($type $name $arg1)"
170        ;;
171    esac; if [ -x /sbin/restorecon ]; then
172        /sbin/restorecon /dev/$name >/dev/null 2>/dev/null;
173    fi;
174done
175/etc/init.d/rc: line 77:   195 Bus error               $@
176/etc/init.d/rc: line 77:   227 Bus error               $@
177/etc/init.d/rc: line 77:   240 Bus error               $@
178/etc/rcS.d/S10checkroot.sh: line 24:   249 Bus error               ( [ "$PASS" != 0 ] && [ "$PASS" != "" ] )
179/etc/rcS.d/S10checkroot.sh: line 24:   250 Bus error               ( [ "$FSTYPE" = "nfs" ] || [ "$FSTYPE" = "nfs4" ] )
180Activating swap:.
181/etc/rcS.d/S10checkroot.sh: line 24:   256 Bus error               which on_ac_power >/dev/null 2>&1
182EXT3 FS on sda1, internal journal
183/etc/init.d/rc: line 77:   245 Bus error               $@
184Setting the system clock..
185Cannot access the Hardware Clock via any known method.
186Use the --debug option to see the details of our search for an access method.
187System Clock set. Local time: Sat Jan  1 00:00:19 UTC 2000.
188/etc/init.d/rc: line 77:   267 Bus error               $@
189/lib/init/mount-functions.sh: line 23:   278 Bus error               which selinuxenabled >/dev/null 2>&1
190/etc/init.d/rc: line 77:   273 Bus error               $@
191Cleaning up ifupdown....
192/etc/init.d/rc: line 77:   322 Bus error               $@
193/etc/init.d/rc: line 77:   330 Bus error               $@
194/etc/init.d/rc: line 77:   332 Bus error               $@
195Loading device-mapper support.
196/etc/init.d/rc: line 77:   339 Bus error               $@
197/etc/rcS.d/S30checkfs.sh: line 62:   348 Bus error               which on_ac_power >/dev/null 2>&1
198Will now check all file systems.
199fsck 1.40-WIP (14-Nov-2006)
200Checking all file systems.
201Done checking file systems.
202A log is being saved in /var/log/fsck/checkfs if that location is writable.
203/etc/init.d/rc: line 77:   346 Bus error               $@
204/etc/rcS.d/S30procps.sh: line 22:   354 Bus error               which sysctl >/dev/null
205/etc/init.d/rc: line 77:   353 Bus error               $@
206Will now mount local filesystems:.
207Will now activate swapfile swap:done.
208/etc/init.d/rc: line 77:   361 Bus error               $@
209/etc/init.d/bootclean: line 169:   376 Bus error               which find >/dev/null 2>&1
210/etc/rcS.d/S36mountall-bootclean.sh: line 13:   374 Bus error               /etc/init.d/bootclean
211/etc/init.d/rc: line 77:   373 Bus error               $@
212/etc/init.d/rc: line 77:   377 Bus error               $@
213b44: eth0: Link is up at 100 Mbps, full duplex.
214b44: eth0: Flow control is off for TX and off for RX.
215Added VLAN with VID == 1 to IF -:eth0:-
216WARNING:  VLAN 1 does not work with many switches,
217consider another number if you have problems.
218/etc/init.d/rc: line 77:   386 Bus error               $@
219Setting up networking.../etc/init.d/rc: line 77:   399 Bus error               $@
220Configuring network interfaces...ifup: failed to open statefile /etc/network/run/ifstate: No such file or directory
221failed.
222/etc/init.d/rc: line 77:   406 Bus error               $@
223/etc/init.d/rc: line 77:   416 Bus error               $@
224/etc/init.d/bootclean: line 169:   424 Bus error               which find >/dev/null 2>&1
225/etc/rcS.d/S46mountnfs-bootclean.sh: line 13:   422 Bus error               /etc/init.d/bootclean
226/etc/init.d/rc: line 77:   421 Bus error               $@
227/etc/rcS.d/S55bootmisc.sh: line 16:   432 Bus error               chgrp utmp /var/run/utmp
228/etc/rcS.d/S55bootmisc.sh: line 16:   433 Segmentation fault      uname -snrvm >/var/run/motd
229/etc/rcS.d/S55bootmisc.sh: line 16:   435 Bus error               which dmesg >/dev/null 2>&1
230/etc/init.d/rc: line 77:   428 Bus error               $@
231/etc/init.d/rc: line 77:   437 Bus error               $@
232/etc/init.d/rc: line 77:   444 Bus error               $@
233/etc/init.d/rc: line 77:   448 Bus error               $@
234INIT: Entering runlevel: 2
235Starting system log daemon: syslogd/etc/rc2.d/S10sysklogd: line 14:   458 Bus error               chown root:adm /dev/xconsole
236.
237/etc/init.d/rc: line 77:   456 Bus error               $@
238Starting kernel log daemon: klogd.
239/etc/init.d/rc: line 77:   464 Bus error               $@
240Zaptel telephony kernel driver: FATAL: Module ztdummy not found.
241Notice: Configuration file is /etc/zaptel.conf
242line 0: Unable to open master device '/dev/zap/ctl'
243
2441 error(s) detected
245
246/sbin/ztcfg failed. Check /etc/zaptel.confzaptel.
247/etc/init.d/rc: line 77:   470 Bus error               $@
248/etc/init.d/rc: line 77:   477 Bus error               $@
249/etc/init.d/rc: line 77:   478 Bus error               $@
250* Not starting internet superserver: no services enabled.
251/etc/init.d/rc: line 77:   480 Bus error               $@
252/etc/init.d/rc: line 77:   486 Bus error               $@
253/etc/rc2.d/S20ssh: line 7:   488 Bus error               ( /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null
254/etc/init.d/rc: line 77:   487 Bus error               $@
255
256
257Signal 10 (BUS) caught by ps (procps version 3.2.7).
258Please send bug reports to <feedback@lists.sf.net> or <albert@users.sf.net>
259Starting Asterisk PBX:
260
261Signal 10 (BUS) caught by ps (procps version 3.2.7).
262Please send bug reports to <feedback@lists.sf.net> or <albert@users.sf.net>
263asterisk.
264/etc/init.d/rc: line 77:   506 Bus error               $@
265Jan  1 01:00:38 WARNING[521]: manager.c:1743 init_manager: Unable to bind socket: Cannot assign requested address
266Starting periodic command scheduler: crond.
267/etc/init.d/rc: line 77:   528 Bus error               $@
268Running local boot scripts (/etc/rc.local)/etc/rc2.d/S99rc.local: line 17:   540 Bus error               /etc/rc.local
269 failed!
270/etc/init.d/rc: line 77:   538 Bus error               $@
271/etc/init.d/rc: line 77:   546 Bus error               $@
272/etc/rc2.d/S99stop-bootlogd: line 17:   549 Bus error               /etc/init.d/bootlogd stop
273/etc/init.d/rc: line 77:   548 Bus error               $@