Ticket #22224: kernellog.txt

File kernellog.txt, 14.0 KB (added by anonymous, 22 months ago)
Line 
1[    0.000000] Linux version 3.18.23 (buildbot@builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r47269) ) #1 Sun Jan 31 12:02:45 CET 2016
2[    0.000000] SoC: AR9 rev 1.1
3[    0.000000] bootconsole [early0] enabled
4[    0.000000] CPU0 revision is: 0001954c (MIPS 34Kc)
5[    0.000000] MIPS: machine is DGN3500 - Netgear DGN3500
6[    0.000000] Determined physical RAM map:
7[    0.000000]  memory: 04000000 @ 00000000 (usable)
8[    0.000000] User-defined physical RAM map:
9[    0.000000]  memory: 04000000 @ 00000000 (usable)
10[    0.000000] Initrd not found or empty - disabling initrd
11[    0.000000] Zone ranges:
12[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
13[    0.000000] Movable zone start for each node
14[    0.000000] Early memory node ranges
15[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
16[    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
17[    0.000000] On node 0 totalpages: 16384
18[    0.000000] free_area_init_node: node 0, pgdat 804262f0, node_mem_map 810061e0
19[    0.000000]   Normal zone: 128 pages used for memmap
20[    0.000000]   Normal zone: 0 pages reserved
21[    0.000000]   Normal zone: 16384 pages, LIFO batch:3
22[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
23[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
24[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
25[    0.000000] pcpu-alloc: [0] 0
26[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
27[    0.000000] Kernel command line: root=/dev/mtdblock0 ip=192.168.1.1:192.168.1.15::::eth0:on console=ttyS1,115200 ethaddr=00:26:f2:52:55:72 phym=64M mem=64M panic=1 root= console=ttyLTQ0,115200
28[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
29[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
30[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
31[    0.000000] Writing ErrCtl register=0002fac5
32[    0.000000] Readback ErrCtl register=0002fac5
33[    0.000000] Memory: 60148K/65536K available (3433K kernel code, 151K rwdata, 768K rodata, 172K init, 194K bss, 5388K reserved)
34[    0.000000] NR_IRQS:256
35[    0.000000] CPU Clock: 333MHz
36[    0.040000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
37[    0.040000] pid_max: default: 32768 minimum: 301
38[    0.044000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
39[    0.048000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
40[    0.056000] pinctrl core: initialized pinctrl subsystem
41[    0.064000] NET: Registered protocol family 16
42[    0.072000] pinctrl-xway 1e100b10.pinmux: Init done
43[    0.076000] dma-xway 1e104100.dma: Init done - hw rev: 6, ports: 5, channels: 20
44[    0.084000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
45[    0.088000]  MEM 0x0000000018000000..0x0000000019ffffff
46[    0.092000]   IO 0x000000001ae00000..0x000000001affffff
47[    0.096000] ath9k,eeprom ath9k_eep: failed to load eeprom address
48[    0.116000] usbcore: registered new interface driver usbfs
49[    0.120000] usbcore: registered new interface driver hub
50[    0.124000] usbcore: registered new device driver usb
51[    0.128000] PCI host bridge to bus 0000:00
52[    0.132000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
53[    0.136000] pci_bus 0000:00: root bus resource [io  0xffffffff]
54[    0.140000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
55[    0.144000] pci 0000:00:0e.0: [168c:ff1d] type 00 class 0x020000
56[    0.144000] pci 0000:00:0e.0: reg 0x10: [mem 0x00000000-0x0000ffff]
57[    0.144000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
58[    0.144000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
59[    0.148000] Switched to clocksource MIPS
60[    0.152000] NET: Registered protocol family 2
61[    0.160000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
62[    0.164000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
63[    0.172000] TCP: Hash tables configured (established 1024 bind 1024)
64[    0.180000] TCP: reno registered
65[    0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes)
66[    0.188000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
67[    0.196000] NET: Registered protocol family 1
68[    0.200000] PCI: CLS 0 bytes, default 32
69[    0.200000] gptu: totally 6 16-bit timers/counters
70[    0.204000] gptu: misc_register on minor 63
71[    0.208000] gptu: succeeded to request irq 126
72[    0.212000] gptu: succeeded to request irq 127
73[    0.216000] gptu: succeeded to request irq 128
74[    0.224000] gptu: succeeded to request irq 129
75[    0.228000] gptu: succeeded to request irq 130
76[    0.232000] gptu: succeeded to request irq 131
77[    0.240000] futex hash table entries: 256 (order: -1, 3072 bytes)
78[    0.248000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
79[    0.252000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
80[    0.276000] msgmni has been set to 117
81[    0.284000] io scheduler noop registered
82[    0.288000] io scheduler deadline registered (default)
83[    0.296000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112, base_baud = 0) is a lantiq,asc
84[    0.304000] console [ttyLTQ0] enabled
85[    0.312000] bootconsole [early0] disabled
86[    0.340000] m25p80 spi32766.0: found mx25l12805d, expected s25fl129p0
87[    0.348000] m25p80 spi32766.0: mx25l12805d (16384 Kbytes)
88[    0.352000] 4 ofpart partitions found on MTD device spi32766.0
89[    0.356000] Creating 4 MTD partitions on "spi32766.0":
90[    0.364000] 0x000000000000-0x000000010000 : "uboot"
91[    0.368000] 0x000000010000-0x000000020000 : "uboot-env"
92[    0.376000] 0x000000020000-0x000000030000 : "calibration"
93[    0.380000] 0x000000050000-0x000000ff0000 : "firmware"
94[    1.404000] 2 uimage-fw partitions found on MTD device firmware
95[    1.408000] 0x000000050000-0x0000001c5b3b : "kernel"
96[    1.416000] 0x0000001c5b3b-0x000000ff0000 : "rootfs"
97[    1.420000] mtd: device 5 (rootfs) set to be root filesystem
98[    1.428000] 1 squashfs-split partitions found on MTD device rootfs
99[    1.432000] 0x000000460000-0x000000ff0000 : "rootfs_data"
100[    2.492000] Realtek RTL8366RB ethernet switch driver version 0.2.4
101[    2.496000] rtl8366rb rtl8366rb: using GPIO pins 491 (SDA) and 493 (SCK)
102[    2.500000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
103[    2.596000] libphy: rtl8366rb: probed
104[    2.600000] libphy: ltq_mii: probed
105[    2.604000] eth0 (uninitialized): no PHY found
106[    2.608000] etop: mdio probe failed
107[    2.612000] wdt 1f8803f0.watchdog: Init done
108[    2.620000] TCP: cubic registered
109[    2.620000] NET: Registered protocol family 17
110[    2.624000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
111[    2.636000] Bridge firewalling registered
112[    2.640000] 8021q: 802.1Q VLAN Support v1.8
113[    2.736000] ath9k,eeprom ath9k_eep: endian check enabled.
114[    2.740000] ath9k,eeprom ath9k_eep: pci slot: 14
115[    2.744000] pci 0000:00:0e.0: fixup device configuration
116[    2.752000] pci 0000:00:0e.0: fixup info: [168c:0029] revision 01 class 0x028000
117[    2.760000] ath9k,eeprom ath9k_eep: loaded ath9k eeprom
118[    2.768000] UBIFS error (pid 1): ubifs_mount: cannot open "ubi0:rootfs", error -19
119[    2.952000] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
120[    2.956000] Freeing unused kernel memory: 172K (80445000 - 80470000)
121[   20.240000] init: Console is alive
122[   20.244000] init: - watchdog -
123[   33.004000] random: nonblocking pool is initialized
124[   38.660000] IFXUSB: ifxusb_hcd: version 3.2 B110801
125[   39.164000] IFXUSB: USB core #0 soft-reset
126[   39.368000] IFXUSB: USB core #0 soft-reset
127[   39.368000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
128[   39.376000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
129[   39.384000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
130[   39.388000] IFXUSB: Init: Power Port (0)
131[   39.392000] hub 1-0:1.0: USB hub found
132[   39.396000] hub 1-0:1.0: 1 port detected
133[   39.508000] init: - preinit -
134[   47.332000] jffs2: notice: (283) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
135[   47.392000] mount_root: switching to jffs2 overlay
136[   47.512000] procd: - early -
137[   47.512000] procd: - watchdog -
138[   50.856000] procd: - ubus -
139[   51.872000] procd: - init -
140[   53.848000] NET: Registered protocol family 10
141[   53.860000] NET: Registered protocol family 8
142[   53.860000] NET: Registered protocol family 20
143[   53.876000] PPP generic driver version 2.4.2
144[   53.888000] ip6_tables: (C) 2000-2006 Netfilter Core Team
145[   53.912000] IFX MEI Version 5.00.00
146[   53.928000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
147[   53.940000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
148[   53.944000] Backport generated by backports.git backports-20150129-0-gdd4a670
149[   53.956000] ip_tables: (C) 2000-2006 Netfilter Core Team
150[   53.972000] ATM1.0.26    ATM (A1) firmware version 0.16
151[   53.976000] ifxmips_atm: ATM init succeed
152[   53.984000] Infineon Technologies DEU driver version 2.0.0
153[   53.992000] IFX DEU DES initialized (multiblock).
154[   54.000000] IFX DEU AES initialized (multiblock).
155[   54.008000] IFX DEU ARC4 initialized (multiblock).
156[   54.012000] IFX DEU SHA1 initialized.
157[   54.012000] IFX DEU MD5 initialized.
158[   54.016000] IFX DEU SHA1_HMAC initialized.
159[   54.024000] IFX DEU MD5_HMAC initialized.
160[   54.036000] nf_conntrack version 0.5.0 (942 buckets, 3768 max)
161[   54.088000] NET: Registered protocol family 24
162[   54.136000] xt_time: kernel timezone is -0000
163[   59.200000] cfg80211: Calling CRDA to update world regulatory domain
164[   59.220000] cfg80211: World regulatory domain updated:
165[   59.220000] cfg80211:  DFS Master region: unset
166[   59.228000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
167[   59.236000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
168[   59.244000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
169[   59.252000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
170[   59.260000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
171[   59.272000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
172[   59.280000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
173[   59.288000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
174[   59.296000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
175[   59.560000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
176[   59.572000] ath: EEPROM regdomain: 0x0
177[   59.572000] ath: EEPROM indicates default country code should be used
178[   59.572000] ath: doing EEPROM country->regdmn map search
179[   59.572000] ath: country maps to regdmn code: 0x3a
180[   59.572000] ath: Country alpha2 being used: US
181[   59.572000] ath: Regpair used: 0x3a
182[   59.592000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
183[   59.596000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb8000000, irq=30
184[   59.600000] cfg80211: Calling CRDA for country: US
185[   59.608000] cfg80211: Regulatory domain changed to country: US
186[   59.612000] cfg80211:  DFS Master region: FCC
187[   59.616000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
188[   59.624000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
189[   59.632000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
190[   59.644000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
191[   59.652000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
192[   59.660000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
193[   59.668000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
194[   79.640000] device eth0.1 entered promiscuous mode
195[   79.644000] device eth0 entered promiscuous mode
196[   79.656000] br-lan: port 1(eth0.1) entered forwarding state
197[   79.660000] br-lan: port 1(eth0.1) entered forwarding state
198[   81.664000] br-lan: port 1(eth0.1) entered forwarding state
199[   89.368000] cfg80211: Calling CRDA for country: UA
200[   89.384000] cfg80211: Regulatory domain changed to country: UA
201[   89.388000] cfg80211:  DFS Master region: ETSI
202[   89.392000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
203[   89.400000] cfg80211:   (2400000 KHz - 2483000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
204[   89.408000] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
205[   89.420000] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
206[   89.428000] cfg80211:   (5490000 KHz - 5670000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
207[   89.436000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
208[   89.444000] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
209[   91.948000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
210[   92.028000] device wlan0 entered promiscuous mode
211[   92.032000] br-lan: port 2(wlan0) entered forwarding state
212[   92.036000] br-lan: port 2(wlan0) entered forwarding state
213[   92.196000] br-lan: port 2(wlan0) entered disabled state
214[   93.252000] br-lan: port 2(wlan0) entered forwarding state
215[   93.256000] br-lan: port 2(wlan0) entered forwarding state
216[   93.264000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
217[   95.260000] br-lan: port 2(wlan0) entered forwarding state
218[  126.984000] [DSL_BSP_Showtime 894]: Datarate US intl = 2156172, fast = 0
219[  126.988000] enter showtime, cell rate: 0 - 5085, 1 - 5085, xdata addr: 0x82e40000