Ticket #1865: vlynq-pci-fixed.dmesg

File vlynq-pci-fixed.dmesg, 1.7 KB (added by Wodin, 11 years ago)

dmesg with patch applied

Line 
1root@OpenWrt:~# dmesg | grep -E '^Linux|vlynq|acx'
2Linux version 2.6.21.5 (michael@marmite) (gcc version 4.1.2) #5 Thu Jun 21 12:50:12 SAST 2007
3vlynq0: regs 0x08611800, irq 29, mem 0x04000000
4vlynq1: regs 0x08611c00, irq 33, mem 0x0c000000
5vlynq0: linked
6vlynq-pci: attaching device TI ACX111 at vlynq0
7acx: this driver is still EXPERIMENTAL
8acx: reading README file and/or Craig's HOWTO is recommended, visit http://acx100.sf.net in case of further questions/discussion
9acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
10acx: running on a little-endian CPU
11acx: PCI module v0.3.36 initialized, waiting for cards to probe...
12acx: found ACX111-based wireless network card at 0000:00:00.0, irq:80, phymem1:0x4000000, phymem2:0x4022000, mem1:0xa4000000, mem1_size:8192, mem2:0xa4022000, mem2_size:131072
13vlynq0: Read of unknown register 0x38 (size 4)
14acx: need to load firmware for acx111 chipset with radio ID 16, please provide via firmware hotplug:
15acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)
16requesting firmware image 'tiacx111c16'
17acx_write_fw (main/combined): 0
18acx_validate_fw (main/combined): 0
19acx: === chipset TNETW1130, radio type 0x16 (Radia), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05: uploaded firmware 'Rev 1.2.1.34' ===
20creating /proc entry driver/acx_wlan0
21creating /proc entry driver/acx_wlan0_diag
22creating /proc entry driver/acx_wlan0_eeprom
23creating /proc entry driver/acx_wlan0_phy
24acx v0.3.36: net device wlan0, driver compiled against wireless extensions 22 and Linux 2.6.21.5