Ticket #13081: bootlog-trunk-r36156

File bootlog-trunk-r36156, 7.2 KB (added by sagili.tsp@…, 5 years ago)

boot log

Line 
1Starting kernel ...
2
3[    0.000000] Linux version 3.7.10 (user@user-linux1.localdomain) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #1 Thu Apr 4 12:47:40 MYT 2013
4[    0.000000] bootconsole [early0] enabled
5[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
6[    0.000000] Ralink RT3352 id:1 rev:6 running at 400.00 MHz
7[    0.000000] Determined physical RAM map:
8[    0.000000]  memory: 04000000 @ 00000000 (usable)
9[    0.000000] Initrd not found or empty - disabling initrd
10[    0.000000] Zone ranges:
11[    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
12[    0.000000] Movable zone start for each node
13[    0.000000] Early memory node ranges
14[    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
15[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
16[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
17[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
18[    0.000000] Kernel command line:  board=boardID console=ttyS1,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),15168k(rootfs),16064k@0x50000(firmware) rootfstype=squashfs,jffs2
19[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
20[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
21[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
22[    0.000000] __ex_table already sorted, skipping sort
23[    0.000000] Writing ErrCtl register=00040004
24[    0.000000] Readback ErrCtl register=00040004
25[    0.000000] Memory: 62120k/65536k available (1970k kernel code, 3416k reserved, 472k data, 180k init, 0k highmem)
26[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
27[    0.000000] NR_IRQS:48
28[    0.000000] console [ttyS1] enabled, bootconsole disabled
29[    0.000000] console [ttyS1] enabled, bootconsole disabled
30[    0.010000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
31[    0.090000] pid_max: default: 32768 minimum: 301
32[    0.100000] Mount-cache hash table entries: 512
33[    0.110000] NET: Registered protocol family 16
34[    0.120000] MIPS: machine is MachineName
35[    0.150000] bio: create slab <bio-0> at 0
36[    0.160000] Switching to clocksource MIPS
37[    0.170000] NET: Registered protocol family 2
38[    0.180000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
39[    0.200000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
40[    0.210000] TCP: Hash tables configured (established 2048 bind 2048)
41[    0.220000] TCP: reno registered
42[    0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
43[    0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
44[    0.250000] NET: Registered protocol family 1
45[    0.290000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
46[    0.300000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
47[    0.330000] msgmni has been set to 121
48[    0.330000] io scheduler noop registered
49[    0.340000] io scheduler deadline registered (default)
50[    0.350000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
51[    0.370000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
52[    0.380000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
53[    0.400000] ramips-spi ramips-spi.0: master is unqueued, this is deprecated
54[    0.410000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
55[    0.420000] 6 cmdlinepart partitions found on MTD device spi0.0
56[    0.440000] Creating 6 MTD partitions on "spi0.0":
57[    0.450000] 0x000000000000-0x000000030000 : "u-boot"
58[    0.460000] 0x000000030000-0x000000040000 : "u-boot-env"
59[    0.470000] 0x000000040000-0x000000050000 : "factory"
60[    0.490000] 0x000000050000-0x000000130000 : "kernel"
61[    0.500000] 0x000000130000-0x000001000000 : "rootfs"
62[    0.510000] mtd: partition "rootfs" set to be root filesystem
63[    0.520000] mtd: partition "rootfs_data" created automatically, ofs=400000, len=C00000
64[    0.540000] 0x000000400000-0x000001000000 : "rootfs_data"
65[    0.550000] 0x000000050000-0x000001000000 : "firmware"
66[    0.570000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 32, using 32
67[    0.590000] TCP: cubic registered
68[    0.600000] NET: Registered protocol family 17
69[    0.610000] 8021q: 802.1Q VLAN Support v1.8
70[    0.630000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
71[    0.640000] Freeing unused kernel memory: 180k freed
72[    4.210000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
73[    4.410000] Button Hotplug driver version 0.4.1
74- preinit -
75Press the [f] key and hit [enter] to enter failsafe mode
76- regular preinit -
77[    8.240000] jffs2: notice: (364) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 11 of xref (0 dead, 0 orphan) found.
78[    9.130000] SCSI subsystem initialized
79[    9.510000] usbcore: registered new interface driver usbfs
80[    9.520000] usbcore: registered new interface driver hub
81[    9.540000] usbcore: registered new device driver usb
82[    9.690000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
83[    9.810000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
84[    9.880000] Initializing USB Mass Storage driver...
85[    9.890000] usbcore: registered new interface driver usb-storage
86[    9.910000] USB Mass Storage support registered.
87switching to jffs2
88- init -
89
90Please press Enter to activate this console. [   32.760000] Compat-drivers backport release: compat-drivers-2013-01-21-1
91[   32.770000] Backport based on wireless-testing.git master-2013-02-22
92[   32.780000] compat.git: wireless-testing.git
93[   32.830000] cfg80211: Calling CRDA to update world regulatory domain
94[   32.840000] cfg80211: World regulatory domain updated:
95[   32.850000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
96[   32.870000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
97[   32.880000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
98[   32.900000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
99[   32.910000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
100[   32.930000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
101[   33.980000] phy0 -> rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.
102[   34.000000] phy0 -> rt2x00_set_chip: Info - Chipset detected - rt: 3352, rf: 000c, rev: 0200.
103[   34.490000] PPP generic driver version 2.4.2
104[   34.770000] ip_tables: (C) 2000-2006 Netfilter Core Team
105[   35.140000] NET: Registered protocol family 24
106[   35.210000] nf_conntrack version 0.5.0 (973 buckets, 3892 max)
107[   35.870000] xt_time: kernel timezone is -0000
108[   36.210000] usbcore: registered new interface driver usblp
109[   36.280000] fuse init (API version 7.20)
110[   41.300000] ramips-wdt: timeout value 60 must be 0 < timeout <= 32, using 32
111[   41.440000] device eth0.1 entered promiscuous mode
112[   41.450000] device eth0 entered promiscuous mode
113[   41.470000] br-lan: port 1(eth0.1) entered forwarding state
114[   41.480000] br-lan: port 1(eth0.1) entered forwarding state
115[   43.480000] br-lan: port 1(eth0.1) entered forwarding state
116
117